QSFP+ Transceivers for the HPE Virtual Connect SE 40Gb F8 Module
40 Gb QSFP+ MPO transceivers (Ethernet only)
This transceiver can also be green.
| Description | Part number |
|---|---|
| HPE BladeSystem c-Class 40 Gb QSFP+ MPO SR4 100 m Transceiver | 720187-B21 |
| HPE X140 40 G QSFP+ MPO SR4 Transceiver 1 | JG325B |
| HPE X140 40 G QSFP+ MPO MM 850 nm CSR4 300 m Transceiver 1 | JG709A |
1
Supported with VC firmware version 1.2.0.1005 or later, and HPE OneView 4.0 or later.
40 Gb QSFP+ LC LR4 transceivers (Ethernet only)
| Description | Part number |
|---|---|
| HPE X140 40 G QSFP+ LC LR4 SM 10 km 1310 nm Transceiver | JG661A |
40 Gb QSFP+ bidirectional transceivers (Ethernet only)
Supports up to 100 m with OM3 and up to 150 m with OM4 cabling.
This transceiver cannot be used for interconnect module clustering connection between VC modules.
Use QSFP 40 G bidirectional short-reach transceiver QSFP- 40 G SR BiDi at the Cisco Nexus side.
| Description | Part number |
|---|---|
| HPE 40 Gb QSFP+ Bidirectional Transceiver | 841716-B21 |
Dual 10GBASE-T QSFP+ 30 m RJ45 transceivers (Ethernet only)
NOTE:
This transceiver is supported only with HPE Synergy Image Streamer.
| Description | Part number |
|---|---|
| HPE Synergy Dual 10G BASE-T QSFP+ 30 m RJ45 Transceiver | 838327-B21 |
HPE Synergy 40GbE/4x10GbE/4x8Gb FC QSFP+ transceivers (Ethernet or Fibre Channel (FC))
NOTE:
Mixing of Ethernet and Fibre Channel port types is not supported.
| Description | Part number |
|---|---|
| HPE Synergy 40 GbE/4x10 GbE/4x8 Gb FC QSFP+ Transceiver | 817040-B21 |