QSFP+ transceivers for the HPE Synergy 40Gb F8 Switch Module
40 Gb QSFP+ MPO transceivers (Ethernet only)
This transceiver can also be green.
| Description | Part number |
|---|---|
| HPE BladeSystem c-Class 40 Gb QSFP+ MPO SR4 100 m Transceiver | 720187-B21 |
| HPE BladeSystem c-Class 40 Gb QSFP+ MPO SR4 300 m Transceiver (obsolete) | 747698-B21 |
| HPE X140 40 G QSFP+ MPO SR4 Transceiver * | JG325B |
| HPE X140 40 G QSFP+ MPO MM 850 nm CSR4 300 m Transceiver * | JG709A |
Supported with VC firmware version 1.2.0.1005 or later, and HPE OneView 4.0 or later.
40 Gb QSFP+ LC LR4 transceivers (Ethernet only)
| Description | Part number |
|---|---|
| HPE X140 40 G QSFP+ LC LR4 SM 10 km 1310 nm Transceiver * | JG661A |
| HPE BladeSystem c-Class 40Gb QSFP+ LC LR4 Transceiver (obsolete) | 720190-B21 |
Supported with VC firmware version 1.2.0.1005 or later, and HPE OneView 4.0 or later.
40 Gb QSFP+ bidirectional transceivers (Ethernet only)
Use QSFP 40 G BiDi short-reach transceiver QSFP-40 G-SR-BD at the Cisco Nexus side.
| Description | Part number |
|---|---|
| HPE 40 Gb QSFP+ Bidirectional Transceiver* | 841716-B21 |
* This transceiver is not supported with interconnect module clustering connections between VC modules.
Dual 10GBASE-T QSFP+ 30m RJ45 transceivers (Ethernet only)
NOTE:
This transceiver is supported only with HPE Synergy Image Streamer.
| Description | Part number |
|---|---|
| HPE Synergy Dual 10G BASE-T QSFP+ 30 m RJ45 Transceiver | 838327-B21 |
HPE Synergy 40GbE/4x10GbE/4x8Gb FC QSFP+ transceivers (Ethernet or Fibre Channel (FC))
NOTE:
Mixing of Ethernet and Fibre Channel port types is not supported.
| Description | Part number |
|---|---|
| HPE Synergy 40 GbE/4x10 GbE/4x8 Gb FC QSFP+ Transceiver | 817040-B21 |