Numerics
- 1:1 VLAN mapping
- application scenario, Application scenario of one-to-one and many-to-one VLAN mapping
- configuration, Configuring one-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- implementation, VLAN mapping implementations, One-to-one VLAN mapping
- 1:2 VLAN mapping
- application scenario, Application scenario of one-to-two and two-to-two VLAN mapping
- configuration, Configuring one-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- implementation, VLAN mapping implementations, One-to-two VLAN mapping
- 10-GE interface;10-GE interface
- combine, Splitting a 40-GE interface and combining 10-GE breakout interfaces
- 2:2 VLAN mapping
- application scenario, Application scenario of one-to-two and two-to-two VLAN mapping
- configuration, Configuring two-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- implementation, VLAN mapping implementations, Two-to-two VLAN mapping
- 40-GE interface;40-GE interface
- split, Splitting a 40-GE interface and combining 10-GE breakout interfaces
- 802
- 802.1ah PBB configuration, Configuring PBB
- 802.1Q-in-802.1Q. Use
- QinQ SVLAN tag 802.1p priority, Setting the 802.1p priority in SVLAN tags
- VLAN group configuration, Configuring a VLAN group
- 802.x
- 802.1 LLDPDU TLV types, TLVs
- 802.1p-to-local priority mapping, Configuring the 802.1p-to-local priority mapping
- 802.3 LLDPDU TLV types, TLVs
- LAN switching LLDP PFC 802.1p priority, Configuring PFC parameters
A
- accessing
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- ACL
- LAN switching LLDP APP parameter, Configuring APP parameters
- action
- loop detection block, Loop protection actions
- loop detection no-learning protection, Loop protection actions
- loop detection shutdown protection, Loop protection actions
- adding
- MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- MAC address table entry (global), Adding or modifying a static or dynamic MAC address entry globally
- MAC address table entry (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- MAC address table multiport unicast entry, Adding or modifying a multiport unicast MAC address entry
- address
- interface MAC address (Layer 3 Ethernet), Setting the MAC address for an Ethernet interface or subinterface
- MAC address learning disable, Disabling MAC address learning
- MAC Information queue length, Configuring the MAC Information queue length
- static source check disable, Disabling static source check
- subinterface MAC address (Layer 3 Ethernet), Setting the MAC address for an Ethernet interface or subinterface
- advertising
- LAN switching LLDP advertisable TLV, Configuring the advertisable TLVs
- LAN switching LLDP+DCBX TLV advertisement, Enabling LLDP and DCBX TLV advertising
- voice VLAN advertisement (LLDP/CDP), Configuring LLDP or CDP to advertise a voice VLAN
- voice VLAN information advertisement to IP phones, Advertising the voice VLAN information to IP phones
- aggregating
- link. See
- aging
- MAC address table timer, Setting the aging timer for dynamic MAC address entries
- spanning tree max age timer, Configuring spanning tree timers
- algorithm
- STP calculation, Calculation process of the STP algorithm
- alternate port (MST), Port roles
- APP parameter (LLDP), Configuring APP parameters
- ARP
- MAC address table ARP fast update, Enabling ARP fast update for MAC address moves
- ARP detection
- VLAN M:1 mapping (dynamic IP address assignment), Enabling ARP detection
- ARP snooping
- VLAN M:1 mapping (static IP address assignment), Enabling ARP snooping
- assigning
- MAC address table learning priority, Assigning MAC learning priority to an interface
- MAC-based VLAN assignment (dynamic), Dynamic MAC-based VLAN assignment
- MAC-based VLAN assignment (server-assigned), Server-assigned MAC-based VLAN
- MAC-based VLAN assignment (static), Static MAC-based VLAN assignment
- port to isolation group (multiple), Assigning a port to an isolation group
- port-based VLAN access port (interface view), Assigning an access port to a VLAN in interface view
- port-based VLAN access port (VLAN view), Assigning one or multiple access ports to a VLAN in VLAN view
- port-based VLAN hybrid port, Assigning a hybrid port to a VLAN
- port-based VLAN trunk port, Assigning a trunk port to a VLAN
- voice VLAN assignment mode (automatic), Automatic mode
- voice VLAN assignment mode (manual), Manual mode
- attribute
- Ethernet link aggregation attribute configuration, Configuration types
- auto
- interface auto power-down (Ethernet), Enabling auto power-down on an Ethernet interface
- loop detection port status auto recovery, Port status auto recovery
- voice VLAN assignment (automatic), Automatic mode
- voice VLAN assignment mode configuration (automatic), Automatic voice VLAN assignment mode configuration example
- voice VLAN LLDP automatic IP phone discovery enable, Enabling LLDP for automatic IP phone discovery
- voice VLAN port operation configuration (automatic assignment), Configuring a port to operate in automatic voice VLAN assignment mode
- AutoMDIX mode (Ethernet interface), Setting the MDIX mode of an Ethernet interface
B
- backbone
- core bridge. See BCB
- edge bridge. See
- MAC address. See B-MACBEB
- PBB configuration, Configuring PBB, PBB configuration task list, PBB configuration example
- PBB core bridge network model, PBB network model
- PBB edge bridge network model, PBB network model
- service instance identifier. See I-SID
- VLAN. See
- backing up
- MST backup port, Port roles
- bandwidth
- Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- LAN switching LLDP ETS parameters, Configuring ETS parameters
- basic management LLDPDU TLV types, TLVs
- BFD
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- blackhole
- MAC address table entry, Types of MAC address entries, Adding or modifying a blackhole MAC address entry
- block action (loop detection), Loop protection actions
- boundary port (MST), Port roles
- BPDU
- MST region max hops, Configuring the maximum hops of an MST region
- spanning tree BPDU drop, Enabling BPDU drop
- spanning tree BPDU guard, Enabling BPDU guard
- spanning tree BPDU transparent transmission (on port), Enabling BPDU transparent transmission on a port
- spanning tree hello time, Configuring spanning tree timers
- spanning tree max age timer, Configuring spanning tree timers
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- STP BPDU forwarding, The configuration BPDU forwarding mechanism of STP
- transmission rate configuration, Configuring the BPDU transmission rate
- bridge
- LAN switching LLDP agent customer bridge, LLDP agent
- LAN switching LLDP agent nearest bridge, LLDP agent
- LAN switching LLDP agent non-TPMR bridge, LLDP agent
- bridging
- interface bridging enable (Layer 2 Ethernet), Enabling bridging on an Ethernet interface
- MST common root bridge, Common root bridge
- MST regional root, Regional root
- PBB network model, PBB network model
- spanning tree dispute guard, About dispute guard
- spanning tree loop guard, Enabling loop guard
- spanning tree root bridge, Configuring the root bridge or a secondary root bridge
- spanning tree root bridge (device), Configuring the current device as the root bridge of a specific spanning tree
- spanning tree root guard, Enabling root guard
- spanning tree secondary root bridge (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- STP designated bridge, Designated bridge and designated port
- STP root bridge, Root bridge
- bulk
- interface configuration, Bulk configuring interfaces
- interface configuration display, Displaying and maintaining bulk interface configuration
- interface configuration restrictions, Configuration restrictions and guidelines
- B-VLAN
- PBB VSI, Configuring a B-VLAN for a PBB VSI
C
- cable
- interface cable connection (Layer 2 Ethernet), Testing the cable connection of an Ethernet interface
- calculating
- MSTI calculation, MSTI calculation
- MSTP CIST calculation, CIST calculation
- spanning tree port path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- spanning tree timeout factor, Configuring the timeout factor
- STP algorithm, Calculation process of the STP algorithm
- CDP
- LAN switching LLDP CDP compatibility, Configuring CDP compatibility
- LAN switching LLDP CDP-compatible configuration, CDP-compatible LLDP configuration example
- voice VLAN advertisement, Configuring LLDP or CDP to advertise a voice VLAN
- voice VLAN information advertisement to IP phones, Advertising the voice VLAN information to IP phones
- changing
- interface to FC interface (Layer 2 Ethernet), Changing a Layer 2 Ethernet interface to an FC interface
- checking
- spanning tree No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- choosing
- Ethernet link aggregation reference port, Choosing a reference port, Choosing a reference port
- Cisco
- LAN switching LLDP CDP compatibility, Configuring CDP compatibility
- LAN switching LLDP configuration (CDP-compatible), CDP-compatible LLDP configuration example
- CIST
- calculation, CIST calculation
- network device connection, CIST
- spanning tree max age timer, Configuring spanning tree timers
- combining
- interfaces (Ethernet 10-GE into 40-GE), Splitting a 40-GE interface and combining 10-GE breakout interfaces
- common root bridge, Common root bridge
- configuring
- Ethernet aggregate interface, Configuring an aggregate interface
- Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Ethernet link aggregation, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- Ethernet link aggregation edge aggregate interface, Configuring an edge aggregate interface
- Ethernet link aggregation group, Configuring an aggregation group
- Ethernet link aggregation group (dynamic), Configuring a dynamic aggregation group
- Ethernet link aggregation group (Layer 2 dynamic), Configuring a Layer 2 dynamic aggregation group
- Ethernet link aggregation group (Layer 2 static), Configuring a Layer 2 static aggregation group
- Ethernet link aggregation group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- Ethernet link aggregation group (Layer 3 static), Configuring a Layer 3 static aggregation group
- Ethernet link aggregation group (static), Configuring a static aggregation group
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- ignored field for load sharing, Configuring the ignored fields for the default load sharing mode
- interface (Ethernet), Configuring Ethernet interfaces
- interface (inloopback), Configuring an inloopback interface
- interface (Layer 2 Ethernet), Configuring a Layer 2 Ethernet interface
- interface (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- interface (loopback), Configuring a loopback interface
- interface (null), Configuring a null interface
- interface basic settings (Ethernet), Configuring basic settings of an Ethernet interface
- interface common settings (Ethernet), Configuring common Ethernet interface settings
- interface generic flow control (Ethernet), Configuring generic flow control on an Ethernet interface
- interface jumbo frame support (Ethernet), Configuring jumbo frame support
- interface link mode (Ethernet), Configuring the link mode of an Ethernet interface
- interface PFC (Ethernet), Configuring PFC on an Ethernet interface
- interface physical state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- interface storm control (Layer 2 Ethernet), Configuring storm control on an Ethernet interface
- interface storm suppression (Ethernet), Configuring storm suppression
- IP subnet-based VLAN, Configuring IP subnet-based VLANs, IP subnet-based VLAN configuration example
- LAN switching LLDP, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- LAN switching LLDP (CDP-compatible), CDP-compatible LLDP configuration example
- LAN switching LLDP 802.1p-to-local priority mapping, Configuring the 802.1p-to-local priority mapping
- LAN switching LLDP advertisable TLVs, Configuring the advertisable TLVs
- LAN switching LLDP APP parameter, Configuring APP parameters
- LAN switching LLDP basics, Performing basic LLDP configurations, Basic LLDP configuration example
- LAN switching LLDP bridge mode, Configuring the LLDP bridge mode
- LAN switching LLDP CDP compatibility, Configuring CDP compatibility
- LAN switching LLDP DCBX, Configuring DCBX, DCBX configuration example
- LAN switching LLDP ETS parameter, Configuring ETS parameters
- LAN switching LLDP group-based WRR queuing, Configuring group-based WRR queuing
- LAN switching LLDP management address, Configuring the management address and its encoding format
- LAN switching LLDP management address encoding format, Configuring the management address and its encoding format
- LAN switching LLDP PFC parameter, Configuring PFC parameters
- LAN switching LLDP trapping, Configuring LLDP trapping and LLDP-MED trapping
- LAN switching LLDP-MED trapping, Configuring LLDP trapping and LLDP-MED trapping
- Layer 2 cut-through forwarding, Configuring cut-through Layer 2 forwarding
- LLDP neighbor aging, Configuring LLDP neighbor validation and aging, Configuring LLDP neighbor aging
- LLDP neighbor validation, Configuring LLDP neighbor validation and aging, Configuring LLDP neighbor validation
- loop detection, Configuring loop detection, Loop detection configuration task list, Loop detection configuration example
- loop detection protection action, Configuring the loop protection action
- loop detection protection action (global), Configuring the global loop protection action
- loop detection protection action (Layer 2 aggregate interface), Configuring the loop protection action on a Layer 2 aggregate interface
- loop detection protection action (Layer 2 Ethernet interface), Configuring the loop protection action on a Layer 2 Ethernet interface
- MAC address table, Configuring the MAC address table, MAC address table configuration task list , MAC address table configuration example
- MAC address table multiport unicast entry (global), Configuring a multiport unicast MAC address entry globally
- MAC address table multiport unicast entry (on interface), Configuring a multiport unicast MAC address entry on an interface
- MAC address table unknown frame forwarding rule, Configuring the device to forward unknown frames after the MAC learning limit on an interface is reached
- MAC Information, Configuring MAC Information, MAC Information configuration example
- MAC Information mode, Configuring the MAC Information mode
- MAC-based VLAN, Configuring MAC-based VLANs , MAC-based VLAN configuration example
- MAC-based VLAN (server-assigned), Configuring server-assigned MAC-based VLAN
- MAC-based VLAN assignment (dynamic), Configuring dynamic MAC-based VLAN assignment
- MAC-based VLAN assignment (static), Configuring static MAC-based VLAN assignment
- management Ethernet interface, Configuring a management Ethernet interface
- MST region, Configuring an MST region
- MST region max hops, Configuring the maximum hops of an MST region
- MSTP, MSTP configuration task list, MSTP configuration example
- MVRP, MVRP configuration task list, MVRP configuration example
- PBB, Configuring PBB, PBB configuration task list, PBB configuration example
- PBB data encapsulation type, Configuring the data encapsulation type
- PBB downlink port, Configuring a downlink port
- PBB uplink port, Configuring an uplink port
- PBB VSI B-VLAN, Configuring a B-VLAN for a PBB VSI
- port isolation, Configuring port isolation
- port isolation (multiple isolation groups), Port isolation configuration example
- port-based VLAN, Configuring port-based VLANs, Port-based VLAN configuration example
- private VLAN, Configuring the private VLAN, Configuration procedure, Private VLAN configuration examples
- private VLAN promiscuous port, Promiscuous port configuration example
- private VLAN trunk promiscuous port, Trunk promiscuous port configuration example
- private VLAN trunk promiscuous+secondary port, Trunk promiscuous and trunk secondary port configuration example
- protocol-based VLAN, Configuring protocol-based VLANs, Protocol-based VLAN configuration example
- PVST, PVST configuration task list, PVST configuration example
- QinQ, Configuring QinQ, QinQ configuration examples
- QinQ basics, Basic QinQ configuration example
- QinQ CVLAN tag TPID value, Configuring the CVLAN TPID
- QinQ SVLAN tag TPID value, Configuring the SVLAN TPID
- QinQ VLAN tag TPID value, Configuring the TPID in VLAN tags
- QinQ VLAN transparent transmission, Configuring transparent transmission for VLANs, VLAN transparent transmission configuration example
- RSTP, RSTP configuration task list
- secondary VLAN Layer 3 communication, Secondary VLAN Layer 3 communication configuration example
- service loopback group, Configuring service loopback groups, Service loopback group configuration example
- spanning tree, Configuring spanning tree protocols, Spanning tree configuration task lists, Spanning tree configuration example
- spanning tree BPDU transmission rate, Configuring the BPDU transmission rate
- spanning tree device priority, Configuring the device priority
- spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- spanning tree edge port, Configuring edge ports
- spanning tree No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- spanning tree port link type, Configuring the port link type
- spanning tree port mode, Configuring the mode a port uses to recognize and send MSTP packets
- spanning tree port path cost, Configuring path costs of ports, Configuring path costs of ports
- spanning tree port priority, Configuring the port priority
- spanning tree port role restriction, Configuring port role restriction
- spanning tree protection functions, Configuring protection functions
- spanning tree root bridge, Configuring the root bridge or a secondary root bridge
- spanning tree root bridge (device), Configuring the current device as the root bridge of a specific spanning tree
- spanning tree secondary root bridge, Configuring the root bridge or a secondary root bridge
- spanning tree secondary root bridge (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- spanning tree switched network diameter, Configuring the network diameter of a switched network
- spanning tree TC Snooping, Configuring TC Snooping
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- spanning tree timeout factor, Configuring the timeout factor
- spanning tree timer, Configuring spanning tree timers
- STP, STP configuration task list
- subinterface (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- super VLAN, Configuring super VLANs, Configuring a super VLAN, Super VLAN configuration example
- super VLAN interface, Configuring a super VLAN interface
- VLAN, Configuring VLANs, VLAN configuration examples
- VLAN basic settings, Configuring basic VLAN settings
- VLAN group, Configuring a VLAN group
- VLAN interface basics, Configuring basic settings of a VLAN interface
- VLAN mapping, Configuring VLAN mapping, VLAN mapping configuration task list, VLAN mapping configuration examples
- VLAN mapping (1:1), Configuring one-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- VLAN mapping (1:2), Configuring one-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- VLAN mapping (2:2), Configuring two-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- VLAN mapping (M:1), Configuring many-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- VLAN mapping (M:1) (static IP address assignment), Configuring many-to-one VLAN mapping in a network with static IP address assignment
- VLAN mapping (M:1)(dynamic IP address assignment), Configuring many-to-one VLAN mapping in a network with dynamic IP address assignment
- VLAN mapping M:1 customer-side port (dynamic IP address assignment), Configuring the customer-side port
- VLAN mapping M:1 customer-side port (static IP address assignment), Configuring the customer-side port
- VLAN mapping M:1 network-side port (dynamic IP address assignment), Configuring the network-side port
- VLAN mapping M:1 network-side port (static IP address assignment), Configuring the network-side port
- voice VLAN, Configuring voice VLANs, Voice VLAN configuration examples
- voice VLAN advertisement (LLDP/CDP), Configuring LLDP or CDP to advertise a voice VLAN
- voice VLAN assignment mode (automatic), Automatic voice VLAN assignment mode configuration example
- voice VLAN assignment mode (manual), Manual voice VLAN assignment mode configuration example
- voice VLAN port operation (automatic assignment), Configuring a port to operate in automatic voice VLAN assignment mode
- voice VLAN port operation (manual assignment), Configuring a port to operate in manual voice VLAN assignment mode
- voice VLAN traffic QoS priority settings, Configuring the QoS priority settings for voice traffic
- connecting
- interface cable connection (Layer 2 Ethernet), Testing the cable connection of an Ethernet interface
- voice VLAN host+IP phone connection (in series), Connecting the host and the IP phone in series
- voice VLAN IP phone+device, Connecting the IP phone to the device
- Converged Enhanced Ethernet. Use CEE
- CoS
- voice VLAN traffic QoS priority settings, Configuring the QoS priority settings for voice traffic
- cost
- spanning tree port path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- spanning tree port path cost configuration, Configuring path costs of ports, Configuring path costs of ports
- STP path cost, Path cost
- creating
- PBB VSI, Creating a PBB VSI
- super VLAN sub-VLAN, Creating a sub-VLAN
- CST
- MST region connection, CST
- customer
- LAN switching LLDP customer bridge mode, Configuring the LLDP bridge mode
- cut-through Layer 2 forwarding, Configuring cut-through Layer 2 forwarding
- CVLAN
- QinQ basic configuration, Basic QinQ configuration example
- QinQ configuration, Configuring QinQ, QinQ configuration examples
- QinQ VLAN transparent transmission configuration, VLAN transparent transmission configuration example
- VLAN mapping configuration, Configuring VLAN mapping, VLAN mapping configuration task list, VLAN mapping configuration examples
- VLAN mapping implementation, VLAN mapping implementations
D
- data
- PBB data encapsulation, Configuring the data encapsulation type
- Data Center
- Bridging Exchange Protocol. Use
- Ethernet. Use DCE
- DCBX
- configuration, Configuring DCBX, DCBX configuration example
- LAN switching LLDP APP parameter configuration, Configuring APP parameters
- LAN switching LLDP ETS parameter configuration, Configuring ETS parameters
- LAN switching LLDP PFC parameter configuration, Configuring PFC parameters
- LAN switching LLDP+DCBX TLV advertisement, Enabling LLDP and DCBX TLV advertising
- default
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- designated
- MST port, Port roles
- STP bridge, Designated bridge and designated port
- STP port, Designated bridge and designated port
- detecting
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- device
- disabling the device to reactivate the shutdown edge ports, Disabling the device to reactivate the shutdown edge ports
- interface configuration (Ethernet), Configuring Ethernet interfaces
- LAN switching LLDP basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- LAN switching LLDP CDP compatibility, Configuring CDP compatibility
- LAN switching LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- LAN switching LLDP configuration (CDP-compatible), CDP-compatible LLDP configuration example
- LAN switching LLDP DCBX configuration, Configuring DCBX, DCBX configuration example, DCBX configuration example
- LAN switching LLDP parameters, Setting other LLDP parameters
- Layer 2 cut-through forwarding configuration, Configuring cut-through Layer 2 forwarding
- loop protection actions, Loop protection actions
- MSTP implementation, MSTP implementation on devices
- MVRP configuration, Configuring MVRP, MVRP configuration task list, MVRP configuration example
- spanning tree BPDU drop, Enabling BPDU drop
- spanning tree BPDU guard, Enabling BPDU guard
- spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- spanning tree dispute guard, About dispute guard
- spanning tree loop guard, Enabling loop guard
- spanning tree No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- spanning tree port role restriction, Configuring port role restriction
- spanning tree priority, Configuring the device priority
- spanning tree protection functions, Configuring protection functions
- spanning tree root guard, Enabling root guard
- spanning tree SNMP notification (new-root election, topology change events), Enabling SNMP notifications for new-root election and topology change events
- spanning tree TC Snooping, Configuring TC Snooping
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- voice VLAN IP phone+device connection, Connecting the IP phone to the device
- DHCP snooping
- VLAN M:1 mapping (dynamic IP address assignment), Enabling DHCP snooping
- Digest Snooping (spanning tree), Configuring Digest Snooping, Digest Snooping configuration example
- directing
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- disabling
- LLDP PVID inconsistency check, Disabling LLDP PVID inconsistency check
- MAC address learning (global), Disabling global MAC address learning
- MAC address learning (on VLAN), Disabling MAC address learning on a VLAN
- remote fault signal detection (Ethernet), Disabling remote fault signal detection
- static source check, Disabling static source check
- discarding
- MST discarding port state, Port states
- displaying
- bulk interface configuration, Displaying and maintaining bulk interface configuration
- Ethernet link aggregation, Displaying and maintaining Ethernet link aggregation
- interface, Displaying and maintaining loopback, null, and inloopback interfaces
- interface (Ethernet), Displaying and maintaining an Ethernet interface
- LAN switching LLDP, Displaying and maintaining LLDP
- loop detection, Displaying and maintaining loop detection
- MAC address table, Displaying and maintaining the MAC address table
- MVRP, Displaying and maintaining MVRP
- PBB, Displaying and maintaining PBB
- port isolation, Displaying and maintaining port isolation
- private VLAN, Displaying and maintaining the private VLAN
- QinQ, Displaying and maintaining QinQ
- service loopback group, Displaying and maintaining service loopback groups
- spanning tree, Displaying and maintaining the spanning tree
- subinterface (Ethernet), Displaying and maintaining an Ethernet interface
- super VLAN, Displaying and maintaining super VLANs
- VLAN, Displaying and maintaining VLANs
- VLAN mapping, Displaying and maintaining VLAN mapping
- voice VLAN, Displaying and maintaining voice VLANs
- dispute
- spanning tree dispute guard, About dispute guard
- dot1d-1998 (STP port path cost calculation), Specifying a standard for the device to use when it calculates the default path cost
- dot1s (STP port mode), Configuring the mode a port uses to recognize and send MSTP packets
- dot1t (STP port path cost calculation), Specifying a standard for the device to use when it calculates the default path cost
- downlink port
- PBB configuration, Configuring a downlink port
- DSCP
- voice VLAN traffic QoS priority settings, Configuring the QoS priority settings for voice traffic
- dynamic
- Ethernet link aggregation (dynamic mode), Aggregating links in dynamic mode
- Ethernet link aggregation (Layer 2), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface
- Ethernet link aggregation group, Configuring a dynamic aggregation group
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- Ethernet link aggregation mode, Link aggregation modes
- Layer 2 Ethernet link aggregation group, Configuring a Layer 2 dynamic aggregation group
- Layer 3 Ethernet link aggregation group, Configuring a Layer 3 dynamic aggregation group
- MAC address table dynamic aging timer, Setting the aging timer for dynamic MAC address entries
- MAC address table entry, Types of MAC address entries
- MAC address table entry configuration (global), Adding or modifying a static or dynamic MAC address entry globally
- MAC address table entry configuration (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- MAC-based VLAN assignment, Dynamic MAC-based VLAN assignment, Configuring dynamic MAC-based VLAN assignment
E
- edge
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- edge port
- MST, Port roles
- spanning tree, Configuring edge ports
- EEE energy saving, Enabling EEE energy saving for Ethernet interfaces in up state
- enabling
- BPDU guard on an interface, Configuring BPDU guard on an interface
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- global BPDU guard, Enabling BPDU guard globally
- interface auto power-down (Ethernet), Enabling auto power-down on an Ethernet interface
- interface bridging (Layer 2 Ethernet), Enabling bridging on an Ethernet interface
- interface EEE (Ethernet), Enabling EEE energy saving for Ethernet interfaces in up state
- interface energy-saving features (Ethernet), Enabling energy saving features on an Ethernet interface
- LAN switching LLDP, Enabling LLDP
- LAN switching LLDP polling, Enabling LLDP polling
- LAN switching LLDP+DCBX TLV advertisement, Enabling LLDP and DCBX TLV advertising
- loop detection (global), Enabling loop detection globally
- loop detection (port-specific), Enabling loop detection on a port
- MAC address move notification, Enable MAC address move notifications
- MAC address synchronization, Enabling MAC address synchronization
- MAC address table ARP fast update, Enabling ARP fast update for MAC address moves
- MAC address table SNMP notification, Enabling SNMP notifications for the MAC address table
- MAC Information, Enabling MAC Information
- MVRP, Enabling MVRP
- MVRP GVRP compatibility, Enabling GVRP compatibility
- PBB L2VPN, Enabling L2VPN
- QinQ, Enabling QinQ
- spanning tree BPDU drop, Enabling BPDU drop
- spanning tree BPDU guard, Enabling BPDU guard
- spanning tree BPDU transparent transmission (on port), Enabling BPDU transparent transmission on a port
- spanning tree dispute guard, About dispute guard
- spanning tree feature, Enabling the spanning tree feature
- spanning tree loop guard, Enabling loop guard
- spanning tree port state transition information output, Enabling outputting port state transition information
- spanning tree root guard, Enabling root guard
- spanning tree SNMP notification (new-root election, topology change events), Enabling SNMP notifications for new-root election and topology change events
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- VLAN mapping M:1 ARP detection (dynamic IP address assignment), Enabling ARP detection
- VLAN mapping M:1 ARP snooping (static IP address assignment), Enabling ARP snooping
- VLAN mapping M:1 DHCP snooping (dynamic IP address assignment), Enabling DHCP snooping
- voice VLAN LLDP automatic IP phone discovery, Enabling LLDP for automatic IP phone discovery
- encapsulating
- LAN switching LLDP frame encapsulated in Ethernet II, LLDP frame formats
- LAN switching LLDP frame encapsulated in SNAP format, LLDP frame formats
- LAN switching LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- PBB data encapsulation, Configuring the data encapsulation type
- VLAN frame encapsulation, VLAN frame encapsulation
- Energy Efficient Ethernet. See EEE
- energy-saving features, Enabling energy saving features on an Ethernet interface
- Ethernet
- interface. See
- LAN switching LLDP APP parameters, Configuring APP parameters
- LAN switching LLDP DCBX configuration, Configuring DCBX, DCBX configuration example
- LAN switching LLDP ETS parameters, Configuring ETS parameters
- LAN switching LLDP frame encapsulated in Ethernet II, LLDP frame formats
- LAN switching LLDP group-based WRR queuing, Configuring group-based WRR queuing
- LAN switching LLDP PFC parameters, Configuring PFC parameters
- LAN switching LLDP trapping, Configuring LLDP trapping and LLDP-MED trapping
- LAN switching LLDP+DCBX TLV advertisement, Enabling LLDP and DCBX TLV advertising
- LAN switching LLDP-MED trapping, Configuring LLDP trapping and LLDP-MED trapping
- link aggregation. See
- loop detection configuration, Configuring loop detection, Loop detection configuration example
- MAC address table configuration, Configuring the MAC address table, MAC address table configuration task list , MAC address table configuration example
- MAC Information configuration, Configuring MAC Information, MAC Information configuration example
- PBB data encapsulation, Configuring the data encapsulation type
- port isolation configuration, Configuring port isolation
- port isolation configuration (multiple isolation groups), Port isolation configuration example
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- port-based VLAN assignment (hybrid port), Assigning a hybrid port to a VLAN
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- port-based VLAN configuration, Configuring port-based VLANs
- private VLAN configuration, Configuring the private VLAN, Configuration procedure, Private VLAN configuration examples
- private VLAN promiscuous port configuration, Promiscuous port configuration example
- private VLAN trunk promiscuous port configuration, Trunk promiscuous port configuration example
- private VLAN trunk promiscuous+secondary port configuration, Trunk promiscuous and trunk secondary port configuration example
- QinQ CVLAN frame header tag, How QinQ works
- QinQ SVLAN frame header tag, How QinQ works
- secondary VLAN Layer 3 communication configuration, Secondary VLAN Layer 3 communication configuration example
- service loopback group configuration, Configuring service loopback groups, Service loopback group configuration example
- subinterface. See Ethernet interface, Ethernet subinterface, subinterface
- super VLAN configuration, Configuring super VLANs, Configuring a super VLAN, Super VLAN configuration example
- super VLAN sub-VLAN creation, Creating a sub-VLAN
- VLAN basic configuration, Configuring basic VLAN settings
- VLAN configuration, Configuring VLANs, VLAN configuration examples
- VLAN frame encapsulation, VLAN frame encapsulation
- VLAN interface basics, Configuring basic settings of a VLAN interface
- VLAN port-based configuration, Port-based VLAN configuration example
- voice VLAN configuration, Configuring voice VLANs, Voice VLAN configuration examples
- Ethernet interface
- 10-GE into 40-GE interface combine;10-GE into 40-GE interface combine, Splitting a 40-GE interface and combining 10-GE breakout interfaces
- 40-GE interface split;40-GE interface split, Splitting a 40-GE interface and combining 10-GE breakout interfaces
- auto power-down enable, Enabling auto power-down on an Ethernet interface
- basic settings configuration, Configuring basic settings of an Ethernet interface
- bridging enable (Layer 2), Enabling bridging on an Ethernet interface
- cable connection (Layer 2), Testing the cable connection of an Ethernet interface
- change to FC interface (Layer 2), Changing a Layer 2 Ethernet interface to an FC interface
- common settings configuration, Configuring common Ethernet interface settings
- configuration, Configuring Ethernet interfaces
- configuration (Layer 2), Configuring a Layer 2 Ethernet interface
- configuration (Layer 3), Configuring a Layer 3 Ethernet interface or subinterface
- display, Displaying and maintaining an Ethernet interface
- energy-saving features, Enabling energy saving features on an Ethernet interface
- generic flow control, Configuring generic flow control on an Ethernet interface
- jumbo frame support configuration, Configuring jumbo frame support
- link mode, Configuring the link mode of an Ethernet interface
- loopback test, Performing a loopback test on an Ethernet interface
- loopback test restrictions, Configuration restrictions and guidelines
- MAC address (Layer 3), Setting the MAC address for an Ethernet interface or subinterface
- maintain, Displaying and maintaining an Ethernet interface
- management interface configuration, Configuring a management Ethernet interface
- MDIX mode (Layer 2), Setting the MDIX mode of an Ethernet interface
- MTU setting (Layer 3), Setting the MTU for an Ethernet interface or subinterface
- naming conventions, Ethernet interface naming conventions
- physical state change suppression, Configuring physical state change suppression on an Ethernet interface
- remote fault signal detection, Disabling remote fault signal detection
- statistics polling interval, Setting the statistics polling interval
- storm control (Layer 2), Configuring storm control on an Ethernet interface
- storm suppression, Configuring storm suppression
- storm suppression restrictions, Configuration restrictions and guidelines
- Ethernet link aggregation
- aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- aggregate interface, Aggregation group, member port, and aggregate interface
- aggregate interface (description), Configuring the description of an aggregate interface
- aggregate interface (MAC address), Setting the MAC address for a Layer 3 aggregate interface
- aggregate interface configuration, Configuring an aggregate interface
- aggregate interface default settings, Restoring the default settings for an aggregate interface
- aggregate interface shutdown, Shutting down an aggregate interface
- aggregation group, Aggregation group, member port, and aggregate interface
- aggregation group restrictions, Configuration restrictions and guidelines
- basic concepts, Basic concepts
- BFD configuration, Enabling BFD for an aggregation group
- configuration, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- configuration types, Configuration types
- display, Displaying and maintaining Ethernet link aggregation
- dynamic mode, Aggregating links in dynamic mode
- edge aggregate interface, Edge aggregate interface, Configuring an edge aggregate interface
- group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- group (Layer 3 static), Configuring a Layer 3 static aggregation group
- group configuration, Configuring an aggregation group
- group configuration (dynamic), Configuring a dynamic aggregation group
- group configuration (static), Configuring a static aggregation group
- group load sharing configuration, Configuring load sharing for link aggregation groups
- group load sharing mode, Setting load sharing modes for link aggregation groups
- how dynamic link aggregation works, How dynamic link aggregation works
- interface configuration (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- LACP, LACP
- Layer 2 aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface, Specifying ignored VLANs for a Layer 2 aggregate interface
- Layer 2 aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Layer 2 aggregation configuration (dynamic), Layer 2 dynamic aggregation configuration example
- Layer 2 aggregation configuration (static), Layer 2 static aggregation configuration example
- Layer 2 aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Layer 2 group (dynamic), Configuring a Layer 2 dynamic aggregation group
- Layer 2 group (static), Configuring a Layer 2 static aggregation group
- Layer 3 aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Layer 3 aggregate interface configuration (MTU), Setting the MTU for a Layer 3 aggregate interface
- Layer 3 aggregation configuration (dynamic), Layer 3 dynamic aggregation configuration example
- Layer 3 aggregation configuration (static), Layer 3 static aggregation configuration example
- load sharing mode, Load sharing modes for link aggregation groups
- local-first load sharing, Enabling local-first load sharing for link aggregation
- maintain, Displaying and maintaining Ethernet link aggregation
- management subnet, Specifying a link aggregation management subnet
- management VLAN+management port, Specifying link aggregation management VLANs and management port
- member port, Aggregation group, member port, and aggregate interface
- member port state, Aggregation states of member ports in an aggregation group, Setting the aggregation state of each member port, Setting the aggregation state of each member port
- modes, Link aggregation modes
- operational key, Operational key
- per-flow load sharing algorithm settings, Configuring per-flow load sharing algorithm settings for Ethernet link aggregation
- reference port, Choosing a reference port
- reference port choice, Choosing a reference port
- static mode, Aggregating links in static mode
- traffic redirection, Enabling link-aggregation traffic redirection
- traffic redirection restrictions, Configuration restrictions and guidelines
- Ethernet subinterface, Configuring Ethernet interfaces, See also Ethernet interface, Layer 2 Ethernet subinterface, Layer 3 Ethernet subinterface
- display, Displaying and maintaining an Ethernet interface
- MAC address (Layer 3), Setting the MAC address for an Ethernet interface or subinterface
- maintain, Displaying and maintaining an Ethernet interface
- MTU setting (Layer 3), Setting the MTU for an Ethernet interface or subinterface
- ETS parameter (LLDP), Configuring ETS parameters
- external
- interface external loopback test (Ethernet), Performing a loopback test on an Ethernet interface
F
- fast
- MAC address table ARP fast update, Enabling ARP fast update for MAC address moves
- FC interface
- Layer 2 Ethernet interface change, Changing a Layer 2 Ethernet interface to an FC interface
- FCoE
- LAN switching LLDP APP parameters, Configuring APP parameters
- LAN switching LLDP DCBX configuration, DCBX configuration example
- flow control
- interface generic flow control (Ethernet), Configuring generic flow control on an Ethernet interface
- interface PFC (Ethernet), Configuring PFC on an Ethernet interface
- forcing
- interface fiber port (Layer 2 Ethernet), Forcibly bringing up a fiber port
- format
- LAN switching LLDP frame encapsulated in Ethernet II, LLDP frame formats
- LAN switching LLDP frame encapsulated in SNAP format, LLDP frame formats
- LAN switching LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- LAN switching LLDP management address encoding format, Configuring the management address and its encoding format
- PBB frame format, PBB frame format
- forwarding
- Layer 2 cut-through forwarding configuration, Configuring cut-through Layer 2 forwarding
- MAC address table unknown frame forwarding rule, Configuring the device to forward unknown frames after the MAC learning limit on an interface is reached
- MST forwarding port state, Port states
- spanning tree forward delay timer, Configuring spanning tree timers
- STP BPDU forwarding, The configuration BPDU forwarding mechanism of STP
- STP forward delay timer, STP timers
- frame
- interface jumbo frame support (Ethernet), Configuring jumbo frame support
- Layer 2 cut-through forwarding configuration, Configuring cut-through Layer 2 forwarding
- loop detection (Ethernet frame header), Loop detection mechanism
- loop detection (inner frame header), Loop detection mechanism
- loop detection interval, Loop detection interval
- MAC address learning, MAC address learning
- MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- MAC address table configuration, Configuring the MAC address table, MAC address table configuration task list , MAC address table configuration example
- MAC address table entry configuration, Configuring MAC address entries
- MAC address table multiport unicast entry, Adding or modifying a multiport unicast MAC address entry
- MAC address table unknown frame forwarding rule, Configuring the device to forward unknown frames after the MAC learning limit on an interface is reached
- MAC Information configuration, Configuring MAC Information, MAC Information configuration example
- port-based VLAN frame handling, How ports of different link types handle frames
- QinQ CVLAN Ethernet frame header tag, How QinQ works
- QinQ implementation, QinQ implementations
- QinQ SVLAN Ethernet frame header tag, How QinQ works
- VLAN frame encapsulation, VLAN frame encapsulation
G
- GARP
- VLAN Registration Protocol. Use
- generic flow control (Ethernet interface), Configuring generic flow control on an Ethernet interface
- Generic VLAN Registration Protocol. Use
- global
- Ethernet link aggregation load sharing mode set, Setting the global link-aggregation load sharing mode
- loop detection protection action, Configuring the global loop protection action
- MAC address learning disable, Disabling global MAC address learning
- MAC address table multiport unicast entry configuration, Configuring a multiport unicast MAC address entry globally
- group
- Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregation, Configuring an aggregation group
- Ethernet link aggregation group, Aggregation group, member port, and aggregate interface
- Ethernet link aggregation group (dynamic), Configuring a dynamic aggregation group
- Ethernet link aggregation group (Layer 2 static), Configuring a Layer 2 static aggregation group, Configuring a Layer 2 dynamic aggregation group
- Ethernet link aggregation group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- Ethernet link aggregation group (Layer 3 static), Configuring a Layer 3 static aggregation group
- Ethernet link aggregation group (static), Configuring a static aggregation group
- Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- Ethernet link aggregation LACP, LACP
- Ethernet link aggregation load sharing mode, Load sharing modes for link aggregation groups, Setting load sharing modes for link aggregation groups
- Ethernet link aggregation member port state, Aggregation states of member ports in an aggregation group
- VLAN group configuration, Configuring a VLAN group
- GVRP
- MVRP compatibility, Enabling GVRP compatibility
I
- identifying
- voice VLAN IP phone identification (LLDP), Automatically identifying IP phones through LLDP
- voice VLAN IP phone identification (OUI address), Identifying IP phones through OUI addresses
- ignored VLAN
- Layer 2 aggregate interface, Specifying ignored VLANs for a Layer 2 aggregate interface
- implementing
- 1:1 VLAN mapping, VLAN mapping implementations, One-to-one VLAN mapping
- 1:2 VLAN mapping, VLAN mapping implementations, One-to-two VLAN mapping
- 2:2 VLAN mapping, VLAN mapping implementations, Two-to-two VLAN mapping
- M:1 VLAN mapping, VLAN mapping implementations, Many-to-one VLAN mapping
- MSTP device implementation, MSTP implementation on devices
- QinQ, QinQ implementations
- inloopback interface
- configuration, Configuring an inloopback interface
- display, Displaying and maintaining loopback, null, and inloopback interfaces
- maintain, Displaying and maintaining loopback, null, and inloopback interfaces
- interface
- bulk configuration, Bulk configuring interfaces
- configuration (inloopback), Configuring loopback, null, and inloopback interfaces, Configuring an inloopback interface
- configuration (loopback), Configuring loopback, null, and inloopback interfaces, Configuring a loopback interface
- configuration (null), Configuring loopback, null, and inloopback interfaces, Configuring a null interface
- Ethernet aggregate interface, Configuring an aggregate interface
- Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- Ethernet aggregate interface (MAC address), Setting the MAC address for a Layer 3 aggregate interface
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- Ethernet link aggregate interface shutdown, Shutting down an aggregate interface
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface, Configuring an edge aggregate interface
- Layer 2 Ethernet aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- Layer 3 aggregate interface configuration (MTU), Setting the MTU for a Layer 3 aggregate interface
- internal
- interface internal loopback test (Ethernet), Performing a loopback test on an Ethernet interface
- interval
- Ethernet link aggregation LACP long timeout, LACP timeout interval
- Ethernet link aggregation LACP short timeout, LACP timeout interval
- loop detection, Loop detection interval, Setting the loop detection interval
- MAC change notification interval, Configuring the MAC change notification interval
- IP addressing
- IP subnet-based VLAN configuration, Configuring IP subnet-based VLANs, IP subnet-based VLAN configuration example
- super VLAN configuration, Configuring super VLANs, Configuring a super VLAN, Super VLAN configuration example
- super VLAN interface configuration, Configuring a super VLAN interface
- voice VLAN configuration, Configuring voice VLANs, Voice VLAN configuration examples
- IP phone
- voice VLAN assignment mode+IP phone cooperation, Cooperation of voice VLAN assignment modes and IP phones
- voice VLAN host+IP phone connection (in series), Connecting the host and the IP phone in series
- voice VLAN identification (LLDP), Automatically identifying IP phones through LLDP
- voice VLAN identification (OUI address), Identifying IP phones through OUI addresses
- voice VLAN information advertisement, Advertising the voice VLAN information to IP phones
- voice VLAN IP phone access method, IP phone access methods
- voice VLAN IP phone+device connection, Connecting the IP phone to the device
- IP subnet-based VLAN
- configuration, Configuring IP subnet-based VLANs, IP subnet-based VLAN configuration example
- isolating
- ports. See
- IST
- MST region, IST
L
- L2VPN
- PBB enable, Enabling L2VPN
- LACP
- Ethernet link aggregation, LACP
- LAN
- Virtual Local Area Network. Use
- LAN switching
- configuring ignored field for load sharing, Configuring the ignored fields for the default load sharing mode
- displaying LLDP, Displaying and maintaining LLDP
- Ethernet aggregate interface, Configuring an aggregate interface
- Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- Ethernet aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- Ethernet link aggregate interface shutdown, Shutting down an aggregate interface
- Ethernet link aggregation (dynamic mode), Aggregating links in dynamic mode
- Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- Ethernet link aggregation (static mode), Aggregating links in static mode
- Ethernet link aggregation basic concepts, Basic concepts
- Ethernet link aggregation configuration, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- Ethernet link aggregation display, Displaying and maintaining Ethernet link aggregation
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface, Configuring an edge aggregate interface
- Ethernet link aggregation group, Configuring an aggregation group
- Ethernet link aggregation group (dynamic dynamic), Configuring a Layer 2 dynamic aggregation group
- Ethernet link aggregation group (dynamic), Configuring a dynamic aggregation group
- Ethernet link aggregation group (Layer 2 static), Configuring a Layer 2 static aggregation group
- Ethernet link aggregation group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- Ethernet link aggregation group (Layer 3 static), Configuring a Layer 3 static aggregation group
- Ethernet link aggregation group (static), Configuring a static aggregation group
- Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- Ethernet link aggregation group load sharing mode, Setting load sharing modes for link aggregation groups
- Ethernet link aggregation group restrictions, Configuration restrictions and guidelines
- Ethernet link aggregation LACP, LACP
- Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Ethernet link aggregation load sharing mode, Load sharing modes for link aggregation groups
- Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- Ethernet link aggregation maintain, Displaying and maintaining Ethernet link aggregation
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- Ethernet link aggregation traffic redirection restrictions, Configuration restrictions and guidelines
- IP subnet-based VLAN configuration, Configuring IP subnet-based VLANs, IP subnet-based VLAN configuration example
- LLDP basic concepts, Basic concepts
- LLDP basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- LLDP CDP compatibility, Configuring CDP compatibility
- LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- LLDP configuration (CDP-compatible), CDP-compatible LLDP configuration example
- LLDP DCBX configuration, DCBX configuration example
- MAC address table configuration, Configuring the MAC address table, MAC address table configuration task list , MAC address table configuration example
- MAC Information configuration, Configuring MAC Information, MAC Information configuration example
- MAC-based VLAN assignment (dynamic), Configuring dynamic MAC-based VLAN assignment
- MAC-based VLAN assignment (static), Configuring static MAC-based VLAN assignment
- MAC-based VLAN configuration, Configuring MAC-based VLANs , MAC-based VLAN configuration example
- MAC-based VLAN configuration (server-assigned), Configuring server-assigned MAC-based VLAN
- MAC-based VLAN configuration restrictions, Configuration restrictions and guidelines
- MRP implementation, MRP implementation
- MVRP configuration, Configuring MVRP, MVRP configuration task list, MVRP configuration example
- MVRP configuration restrictions, Configuration restrictions and guidelines
- MVRP display, Displaying and maintaining MVRP
- MVRP GVRP compatibility, Enabling GVRP compatibility
- MVRP maintain, Displaying and maintaining MVRP
- MVRP protocols and standards, Protocols and standards
- MVRP registration mode setting, Setting an MVRP registration mode
- MVRP timer set, Setting MRP timers
- PBB configuration, Configuring PBB, PBB configuration task list, PBB configuration example
- PBB data encapsulation type configuration, Configuring the data encapsulation type
- PBB display, Displaying and maintaining PBB
- PBB downlink port, Configuring a downlink port
- PBB frame format, PBB frame format
- PBB frame forwarding, PBB frame forwarding
- PBB L2VPN enable, Enabling L2VPN
- PBB maintain, Displaying and maintaining PBB
- PBB protocols and standards, Protocols and standards
- PBB uplink port, Configuring an uplink port
- PBB VSI B-VLAN configuration, Configuring a B-VLAN for a PBB VSI
- PBB VSI creation, Creating a PBB VSI
- port isolation configuration, Configuring port isolation
- port isolation configuration (multiple isolation groups), Port isolation configuration example
- port isolation display, Displaying and maintaining port isolation
- port isolation group assignment (multiple), Assigning a port to an isolation group
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- port-based VLAN assignment (hybrid port), Assigning a hybrid port to a VLAN
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- port-based VLAN configuration, Configuring port-based VLANs
- private VLAN configuration, Configuring the private VLAN, Configuration procedure, Private VLAN configuration examples
- private VLAN configuration restrictions, Configuration restrictions and guidelines
- private VLAN display, Displaying and maintaining the private VLAN
- private VLAN promiscuous port configuration, Promiscuous port configuration example
- private VLAN trunk promiscuous port configuration, Trunk promiscuous port configuration example
- private VLAN trunk promiscuous+secondary port configuration, Trunk promiscuous and trunk secondary port configuration example
- protocol-based VLAN configuration, Configuring protocol-based VLANs, Protocol-based VLAN configuration example
- QinQ basic configuration, Basic QinQ configuration example
- QinQ configuration, Configuring QinQ, QinQ configuration examples
- QinQ configuration restrictions, Restrictions and guidelines
- QinQ CVLAN tag TPID value, Configuring the CVLAN TPID
- QinQ implementation, QinQ implementations
- QinQ protocols and standards, Protocols and standards
- QinQ SVLAN tag 802.1p priority, Setting the 802.1p priority in SVLAN tags
- QinQ SVLAN tag TPID value, Configuring the SVLAN TPID
- QinQ VLAN tag TPID value, Configuring the TPID in VLAN tags
- QinQ VLAN transparent transmission configuration, VLAN transparent transmission configuration example
- secondary VLAN Layer 3 communication configuration, Secondary VLAN Layer 3 communication configuration example
- service loopback group configuration, Configuring service loopback groups, Service loopback group configuration example
- service loopback group display, Displaying and maintaining service loopback groups
- super VLAN configuration, Configuring super VLANs, Configuring a super VLAN, Super VLAN configuration example
- super VLAN display, Displaying and maintaining super VLANs
- super VLAN interface configuration, Configuring a super VLAN interface
- super VLAN sub-VLAN creation, Creating a sub-VLAN
- troubleshooting PBB, Troubleshooting PBB
- troubleshooting PBB customer frame peer transmission, Failed to transmit customer frames to peer
- VLAN basic configuration, Configuring basic VLAN settings
- VLAN configuration, Configuring VLANs, VLAN configuration examples
- VLAN display, Displaying and maintaining VLANs
- VLAN group configuration, Configuring a VLAN group
- VLAN interface basics, Configuring basic settings of a VLAN interface
- VLAN maintain, Displaying and maintaining VLANs
- VLAN port-based configuration, Port-based VLAN configuration example
- VLAN protocols and standards, Protocols and standards
- voice VLAN advertisement (LLDP/CDP), Configuring LLDP or CDP to advertise a voice VLAN
- voice VLAN assignment mode configuration (automatic), Automatic voice VLAN assignment mode configuration example
- voice VLAN assignment mode configuration (manual), Manual voice VLAN assignment mode configuration example
- voice VLAN display, Displaying and maintaining voice VLANs
- voice VLAN LLDP automatic IP phone discovery enable, Enabling LLDP for automatic IP phone discovery
- voice VLAN port operation configuration (automatic assignment), Configuring a port to operate in automatic voice VLAN assignment mode
- voice VLAN port operation configuration (manual assignment), Configuring a port to operate in manual voice VLAN assignment mode
- voice VLAN port operation configuration restrictions (automatic assignment), Configuration restrictions and guidelines
- voice VLAN port operation configuration restrictions (manual assignment), Configuration restrictions and guidelines
- Layer 2
- Ethernet interface bridging enable, Enabling bridging on an Ethernet interface
- Ethernet interface cable connection, Testing the cable connection of an Ethernet interface
- Ethernet interface change to FC interface, Changing a Layer 2 Ethernet interface to an FC interface
- Ethernet interface configuration, Configuring a Layer 2 Ethernet interface
- Ethernet interface MDIX mode, Setting the MDIX mode of an Ethernet interface
- Ethernet interface storm control configuration, Configuring storm control on an Ethernet interface
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- Ethernet link aggregation load sharing, Layer 2 aggregation load sharing configuration example
- interface configuration (Ethernet), Configuring Ethernet interfaces
- LAN switching LLDP basic configuration, Basic LLDP configuration example
- LAN switching LLDP configuration, LLDP configuration examples
- LAN switching LLDP group-based WRR queuing, Configuring group-based WRR queuing
- LAN switching LLDP trapping, Configuring LLDP trapping and LLDP-MED trapping
- LAN switching LLDP+DCBX TLV advertisement, Enabling LLDP and DCBX TLV advertising
- LAN switching LLDP-MED trapping, Configuring LLDP trapping and LLDP-MED trapping
- loop detection configuration, Configuring loop detection, Loop detection configuration task list, Loop detection configuration example
- PBB configuration, Configuring PBB, PBB configuration task list, PBB configuration example
- PBB data encapsulation type configuration, Configuring the data encapsulation type
- PBB downlink port, Configuring a downlink port
- PBB frame format, PBB frame format
- PBB frame forwarding, PBB frame forwarding
- PBB L2VPN enable, Enabling L2VPN
- PBB uplink port, Configuring an uplink port
- PBB VSI B-VLAN configuration, Configuring a B-VLAN for a PBB VSI
- PBB VSI creation, Creating a PBB VSI
- VLAN basic configuration, Configuring basic VLAN settings
- VLAN configuration, Configuring VLANs, VLAN configuration examples
- voice VLAN configuration, Configuring voice VLANs, Voice VLAN configuration examples
- Layer 2 Ethernet interface
- fiber port, Forcibly bringing up a fiber port
- interface connection distance setting, Setting the interface connection distance
- Layer 2 LAN switching
- cut-through forwarding configuration, Configuring cut-through Layer 2 forwarding
- displaying spanning tree, Displaying and maintaining the spanning tree
- maintaining spanning tree, Displaying and maintaining the spanning tree
- MST region, Configuring an MST region
- MSTP configuration, MSTP configuration example
- PVST configuration, PVST configuration example
- spanning tree configuration, Configuring spanning tree protocols, Spanning tree configuration example
- spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- VLAN mapping configuration, Configuring VLAN mapping, VLAN mapping configuration task list, VLAN mapping configuration examples
- VLAN mapping configuration (1:1), Configuring one-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- VLAN mapping configuration (1:2), Configuring one-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- VLAN mapping configuration (2:2), Configuring two-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- VLAN mapping configuration (M:1), Configuring many-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- Layer 3
- aggregate interface configuration (MTU), Setting the MTU for a Layer 3 aggregate interface
- Ethernet aggregate interface, Configuring an aggregate interface
- Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet aggregate interface (MAC address), Setting the MAC address for a Layer 3 aggregate interface
- Ethernet interface configuration, Configuring a Layer 3 Ethernet interface or subinterface
- Ethernet interface MAC address, Setting the MAC address for an Ethernet interface or subinterface
- Ethernet interface MTU setting, Setting the MTU for an Ethernet interface or subinterface
- Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- Ethernet link aggregate interface shutdown, Shutting down an aggregate interface
- Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- Ethernet link aggregation configuration, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface, Configuring an edge aggregate interface
- Ethernet link aggregation group, Configuring an aggregation group
- Ethernet link aggregation group (dynamic), Configuring a dynamic aggregation group
- Ethernet link aggregation group (static), Configuring a static aggregation group
- Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- Ethernet link aggregation group load sharing mode, Setting load sharing modes for link aggregation groups
- Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- Ethernet subinterface configuration, Configuring a Layer 3 Ethernet interface or subinterface
- Ethernet subinterface MAC address, Setting the MAC address for an Ethernet interface or subinterface
- Ethernet subinterface MTU setting, Setting the MTU for an Ethernet interface or subinterface
- interface configuration (Ethernet), Configuring Ethernet interfaces
- IP subnet-based VLAN configuration, Configuring IP subnet-based VLANs
- LAN switching LAN switching VLAN interface basics, Configuring basic settings of a VLAN interface
- LAN switching LLDP basic configuration, Basic LLDP configuration example
- LAN switching LLDP configuration, LLDP configuration examples
- LAN switching LLDP trapping, Configuring LLDP trapping and LLDP-MED trapping
- LAN switching LLDP-MED trapping, Configuring LLDP trapping and LLDP-MED trapping
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- port-based VLAN assignment (hybrid port), Assigning a hybrid port to a VLAN
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- port-based VLAN configuration, Configuring port-based VLANs
- private VLAN configuration, Private VLAN configuration examples
- private VLAN promiscuous port configuration, Promiscuous port configuration example
- private VLAN trunk promiscuous port configuration, Trunk promiscuous port configuration example
- private VLAN trunk promiscuous+secondary port configuration, Trunk promiscuous and trunk secondary port configuration example
- protocol-based VLAN configuration, Configuring protocol-based VLANs
- secondary VLAN Layer 3 communication configuration, Secondary VLAN Layer 3 communication configuration example
- super VLAN configuration, Super VLAN configuration example
- voice VLAN configuration, Configuring voice VLANs, Voice VLAN configuration examples
- learning
- loop detection no-learning action, Loop protection actions
- MAC address, MAC address learning
- MAC address learning disable, Disabling MAC address learning
- MAC address table learning priority, Assigning MAC learning priority to an interface
- MST learning port state, Port states
- legacy
- spanning tree port mode, Configuring the mode a port uses to recognize and send MSTP packets
- spanning tree port path cost calculation, Specifying a standard for the device to use when it calculates the default path cost
- link
- aggregation. See
- interface link mode (Ethernet), Configuring the link mode of an Ethernet interface
- link layer discovery protocol. Use
- MSTP configuration, MSTP configuration example
- PVST configuration, PVST configuration example
- spanning tree configuration, Configuring spanning tree protocols, Spanning tree configuration task lists, Spanning tree configuration example
- spanning tree hello time, Configuring spanning tree timers
- spanning tree port link type configuration, Configuring the port link type
- link aggregation
- Ethernet link aggregation. See
- LLDP
- 802.1p-to-local priority mapping, Configuring the 802.1p-to-local priority mapping
- advertisable TLV configuration, Configuring the advertisable TLVs
- agent, LLDP agent
- APP parameter configuration, Configuring APP parameters
- basic concepts, Basic concepts
- basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- bridge mode configuration, Configuring the LLDP bridge mode
- CDP compatibility configuration, Configuring CDP compatibility
- CDP-compatible configuration, CDP-compatible LLDP configuration example
- configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- DCBX configuration, Configuring DCBX, DCBX configuration example
- disabling PVID inconsistency check, Disabling LLDP PVID inconsistency check
- displaying, Displaying and maintaining LLDP
- enable, Enabling LLDP
- ETS parameter configuration, Configuring ETS parameters
- group-based WRR queuing, Configuring group-based WRR queuing
- how it works, Working mechanism
- LAN switching LLDP+DCBX TLV advertisement, Enabling LLDP and DCBX TLV advertising
- LAN switching LLDP-MED trapping configuration, Configuring LLDP trapping and LLDP-MED trapping
- LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- LLDP frame format, LLDP frame formats
- LLDP frame reception, Receiving LLDP frames
- LLDP frame transmission, Transmitting LLDP frames
- LLDPDU management address TLV, Management address
- LLDPDU TLV types, TLVs
- LLDPDU TLVs, LLDPDUs
- management address configuration, Configuring the management address and its encoding format
- management address encoding format, Configuring the management address and its encoding format
- neighbor aging configuration, Configuring LLDP neighbor validation and aging
- neighbor validation aging, Configuring LLDP neighbor aging
- neighbor validation configuration, Configuring LLDP neighbor validation and aging, Configuring LLDP neighbor validation
- operating mode (disable), LLDP operating modes
- operating mode (Rx), LLDP operating modes
- operating mode (Tx), LLDP operating modes
- operating mode (TxRx), LLDP operating modes
- operating mode set, Setting the LLDP operating mode
- parameter set, Setting other LLDP parameters
- PFC parameter configuration, Configuring PFC parameters
- polling enable, Enabling LLDP polling
- protocols and standards, Protocols and standards
- reinitialization delay, Setting the LLDP reinitialization delay
- trapping configuration, Configuring LLDP trapping and LLDP-MED trapping
- voice VLAN advertisement, Configuring LLDP or CDP to advertise a voice VLAN
- voice VLAN information advertisement to IP phones, Advertising the voice VLAN information to IP phones
- voice VLAN IP phone identification, Automatically identifying IP phones through LLDP
- voice VLAN IP phone identification method, Methods of identifying IP phones
- voice VLAN LLDP automatic IP phone discovery enable, Enabling LLDP for automatic IP phone discovery
- LLDP frame
- encapsulated in Ethernet II format, LLDP frame formats
- encapsulated in SNAP format, LLDP frame formats
- encapsulation format, Setting an encapsulation format for LLDP frames
- receiving, Receiving LLDP frames
- transmitting, Transmitting LLDP frames
- LLDPDU
- LAN switching LLDP basic configuration, Basic LLDP configuration example
- LAN switching LLDP configuration, LLDP configuration task list, LLDP configuration examples
- LLDP basic configuration, Performing basic LLDP configurations
- LLDP configuration, Configuring LLDP
- LLDP parameters, Setting other LLDP parameters
- management address configuration, Configuring the management address and its encoding format
- management address encoding format, Configuring the management address and its encoding format
- management address TLV, Management address
- TLV basic management types, TLVs
- TLV LLDP-MED types, TLVs
- TLV organization-specific types, TLVs
- load balancing
- service loopback group configuration, Configuring service loopback groups, Service loopback group configuration example
- load sharing
- configuring ignored field for load sharing, Configuring the ignored fields for the default load sharing mode
- Ethernet link aggregation group configuration, Configuring load sharing for link aggregation groups
- Ethernet link aggregation group load sharing, Load sharing modes for link aggregation groups
- Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Ethernet link aggregation load sharing mode, Setting load sharing modes for link aggregation groups
- Ethernet link aggregation load sharing mode for MAC-in-MAC traffic (global), Setting the global load sharing mode for MAC-in-MAC traffic
- Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- Ethernet link aggregation packet type-based load sharing, Load sharing modes for link aggregation groups
- Ethernet link aggregation per-flow load sharing, Load sharing modes for link aggregation groups
- Ethernet link aggregation per-flow load sharing algorithm settings, Configuring per-flow load sharing algorithm settings for Ethernet link aggregation
- Ethernet link aggregation per-packet load sharing, Load sharing modes for link aggregation groups
- local
- Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- Ethernet link aggregation per-flow load sharing algorithm settings, Configuring per-flow load sharing algorithm settings for Ethernet link aggregation
- loop
- MSTP configuration, MSTP configuration example
- PVST configuration, PVST configuration example
- spanning tree configuration, Configuring spanning tree protocols, Spanning tree configuration task lists, Spanning tree configuration example
- spanning tree loop guard, Enabling loop guard
- loop detection
- configuration, Configuring loop detection, Loop detection configuration task list, Loop detection configuration example
- display, Displaying and maintaining loop detection
- enable, Enabling loop detection
- interval, Loop detection interval
- interval setting, Setting the loop detection interval
- mechanisms, Loop detection mechanism
- port status auto recovery, Port status auto recovery
- protection action configuration, Configuring the loop protection action
- protection action configuration (global), Configuring the global loop protection action
- protection action configuration (Layer 2 aggregate interface), Configuring the loop protection action on a Layer 2 aggregate interface
- protection action configuration (Layer 2 Ethernet interface), Configuring the loop protection action on a Layer 2 Ethernet interface
- protection actions, Loop protection actions
- loopback
- interface loopback test (Ethernet), Performing a loopback test on an Ethernet interface
- loopback interface
- configuration, Configuring a loopback interface
- display, Displaying and maintaining loopback, null, and inloopback interfaces
- maintain, Displaying and maintaining loopback, null, and inloopback interfaces
M
- M:1 VLAN mapping
- application scenario, Application scenario of one-to-one and many-to-one VLAN mapping
- ARP detection (dynamic IP address assignment), Enabling ARP detection
- ARP snooping (static IP address assignment), Enabling ARP snooping
- configuration, Configuring many-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- configuration (dynamic IP address assignment), Configuring many-to-one VLAN mapping in a network with dynamic IP address assignment
- configuration (static IP address assignment), Configuring many-to-one VLAN mapping in a network with static IP address assignment
- customer-side port (dynamic IP address assignment), Configuring the customer-side port
- customer-side port (static IP address assignment), Configuring the customer-side port
- DHCP snooping (dynamic IP address assignment), Enabling DHCP snooping
- implementation, VLAN mapping implementations, Many-to-one VLAN mapping
- network-side port (dynamic IP address assignment), Configuring the network-side port
- network-side port (static IP address assignment), Configuring the network-side port
- MAC
- PBB configuration, PBB configuration task list, PBB configuration example
- MAC address table
- address learning, MAC address learning
- address synchronization, Enabling MAC address synchronization
- ARP fast update enable, Enabling ARP fast update for MAC address moves
- blackhole entry, Adding or modifying a blackhole MAC address entry
- configuration, Configuring the MAC address table, MAC address table configuration task list , MAC address table configuration example
- display, Displaying and maintaining the MAC address table
- dynamic aging timer, Setting the aging timer for dynamic MAC address entries
- entry configuration, Configuring MAC address entries
- entry configuration (global), Adding or modifying a static or dynamic MAC address entry globally
- entry configuration (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- entry creation, How a MAC address entry is created
- entry types, Types of MAC address entries
- learning priority assignment, Assigning MAC learning priority to an interface
- MAC address learning disable, Disabling MAC address learning
- MAC address move notification, Enable MAC address move notifications
- manual entries, Manually configuring MAC address entries
- multiport unicast entry, Adding or modifying a multiport unicast MAC address entry
- SNMP notification enable, Enabling SNMP notifications for the MAC address table
- static source check disable, Disabling static source check
- unknown frame forwarding rule, Configuring the device to forward unknown frames after the MAC learning limit on an interface is reached
- MAC address table learning limit on interface
- set, Setting the MAC learning limit on an interface
- MAC addressing
- Ethernet aggregate interface, Setting the MAC address for a Layer 3 aggregate interface
- interface MAC address (Layer 3 Ethernet), Setting the MAC address for an Ethernet interface or subinterface
- MAC-based VLAN assignment (dynamic), Dynamic MAC-based VLAN assignment, Configuring dynamic MAC-based VLAN assignment
- MAC-based VLAN assignment (server-assigned), Server-assigned MAC-based VLAN
- MAC-based VLAN assignment (static), Static MAC-based VLAN assignment, Configuring static MAC-based VLAN assignment
- MAC-based VLAN configuration, Configuring MAC-based VLANs , MAC-based VLAN configuration example
- MAC-based VLAN configuration (server-assigned), Configuring server-assigned MAC-based VLAN
- subinterface MAC address (Layer 3 Ethernet), Setting the MAC address for an Ethernet interface or subinterface
- VLAN frame encapsulation, VLAN frame encapsulation
- MAC Information
- change notification interval, Configuring the MAC change notification interval
- configuration, Configuring MAC Information, MAC Information configuration example
- configuration restrictions, Configuration restrictions and guidelines
- enable, Enabling MAC Information
- mode configuration, Configuring the MAC Information mode
- queue length setting, Configuring the MAC Information queue length
- MAC relay (LLDP agent), LLDP agent
- MAC-based VLAN
- assignment (dynamic), Configuring dynamic MAC-based VLAN assignment
- assignment (static), Configuring static MAC-based VLAN assignment
- configuration, Configuring MAC-based VLANs , MAC-based VLAN configuration example
- configuration (server-assigned), Configuring server-assigned MAC-based VLAN
- configuration restrictions, Configuration restrictions and guidelines
- dynamic assignment, Dynamic MAC-based VLAN assignment
- server-assigned, Server-assigned MAC-based VLAN
- static assignment, Static MAC-based VLAN assignment
- MAC-in-MAC
- Ethernet link aggregation group load sharing mode for MAC-in-MAC traffic, Setting the global load sharing mode for MAC-in-MAC traffic
- PBB configuration, Configuring PBB
- maintaining
- Ethernet link aggregation, Displaying and maintaining Ethernet link aggregation
- interface, Displaying and maintaining loopback, null, and inloopback interfaces
- interface (Ethernet), Displaying and maintaining an Ethernet interface
- MVRP, Displaying and maintaining MVRP
- PBB, Displaying and maintaining PBB
- spanning tree, Displaying and maintaining the spanning tree
- subinterface (Ethernet), Displaying and maintaining an Ethernet interface
- VLAN, Displaying and maintaining VLANs
- management address
- LAN switching LLDP encoding format, Configuring the management address and its encoding format
- manual
- voice VLAN assignment mode, Manual mode
- voice VLAN assignment mode configuration, Manual voice VLAN assignment mode configuration example
- voice VLAN port operation configuration, Configuring a port to operate in manual voice VLAN assignment mode
- mapping
- 1:1 VLAN mapping, Application scenario of one-to-one and many-to-one VLAN mapping
- 1:2 VLAN mapping, Application scenario of one-to-two and two-to-two VLAN mapping
- 2:2 VLAN mapping, Application scenario of one-to-two and two-to-two VLAN mapping
- M:1 VLAN mapping, Application scenario of one-to-one and many-to-one VLAN mapping
- MSTP VLAN-to-instance mapping table, VLAN-to-instance mapping table
- master
- MSTP master port, Port roles
- max age timer (STP), STP timers
- maximum transmission unit. Use
- mCheck
- spanning tree, Performing mCheck
- MDI mode (Ethernet interface), Setting the MDIX mode of an Ethernet interface
- MDIX mode (Ethernet interface), Setting the MDIX mode of an Ethernet interface
- MED (LLDP-MED trapping), Configuring LLDP trapping and LLDP-MED trapping
- message
- MRP JoinEmpty, MRP messages
- MRP JoinIn, MRP messages
- MRP Leave, MRP messages
- MRP LeaveAll, MRP messages
- MRP New, MRP messages
- MRP timers, MRP timers
- MIB
- LAN switching LLDP basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- LAN switching LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- mode
- Ethernet link aggregation dynamic, Link aggregation modes, Aggregating links in dynamic mode
- Ethernet link aggregation LACP operation active, LACP operating modes
- Ethernet link aggregation LACP operation passive, LACP operating modes
- Ethernet link aggregation load sharing, Load sharing modes for link aggregation groups
- Ethernet link aggregation static, Link aggregation modes, Aggregating links in static mode
- interface Auto MDIX (Layer 2 Ethernet), Setting the MDIX mode of an Ethernet interface
- interface link mode (Ethernet), Configuring the link mode of an Ethernet interface
- interface MDI (Layer 2 Ethernet), Setting the MDIX mode of an Ethernet interface
- interface MDIX (Layer 2 Ethernet), Setting the MDIX mode of an Ethernet interface
- LAN switching LLDP customer bridge mode, Configuring the LLDP bridge mode
- LAN switching LLDP disable, LLDP operating modes, Setting the LLDP operating mode
- LAN switching LLDP Rx, LLDP operating modes, Setting the LLDP operating mode
- LAN switching LLDP service bridge mode, Configuring the LLDP bridge mode
- LAN switching LLDP Tx, LLDP operating modes, Setting the LLDP operating mode
- LAN switching LLDP TxRx, LLDP operating modes, Setting the LLDP operating mode
- MAC Information syslog, Configuring the MAC Information mode
- MAC Information trap, Configuring the MAC Information mode
- MVRP registration, Setting an MVRP registration mode
- MVRP registration fixed, MVRP registration modes
- MVRP registration forbidden, MVRP registration modes
- MVRP registration normal, MVRP registration modes
- spanning tree mCheck, Performing mCheck
- spanning tree MSTP, Setting the spanning tree mode
- spanning tree PVST, Setting the spanning tree mode
- spanning tree RSTP, Setting the spanning tree mode
- spanning tree STP, Setting the spanning tree mode
- voice VLAN assignment automatic, Automatic mode
- voice VLAN assignment manual, Manual mode
- voice VLAN port operation normal, Security mode and normal mode of voice VLANs
- voice VLAN port operation security, Security mode and normal mode of voice VLANs
- modifying
- MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- MAC address table entry (global), Adding or modifying a static or dynamic MAC address entry globally
- MAC address table entry (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- MAC address table multiport unicast entry, Adding or modifying a multiport unicast MAC address entry
- MRP
- implementation, MRP implementation
- messages, MRP messages
- MVRP configuration, Configuring MVRP, MVRP configuration task list, MVRP configuration example
- timers, MRP timers
- MST
- region max hops, Configuring the maximum hops of an MST region
- MSTI
- calculation, MSTI calculation
- MRP, MRP
- MST instance, MSTI
- MSTP, Configuring spanning tree protocols, See also
- basic concepts, MSTP basic concepts
- CIST, CIST
- CIST calculation, CIST calculation
- common root bridge, Common root bridge
- configuration, MSTP configuration task list, MSTP configuration example
- CST, CST
- device implementation, MSTP implementation on devices
- feature enable, Enabling the spanning tree feature in STP/RSTP/MSTP mode
- features, MSTP features
- how it works, How MSTP works
- IST, IST
- mode set, Setting the spanning tree mode
- MST region, MST region
- MST region configuration, Configuring an MST region
- MSTI, MSTI
- MSTI calculation, MSTI calculation
- port roles, Port roles
- port states, Port states
- protocols and standards, Protocols and standards
- regional root, Regional root
- relationships, MSTP
- spanning tree max age timer, Configuring spanning tree timers
- spanning tree port mode configuration, Configuring the mode a port uses to recognize and send MSTP packets
- VLAN-to-instance mapping table, VLAN-to-instance mapping table
- MTU
- Layer 3 Ethernet aggregate interface, Setting the MTU for a Layer 3 aggregate interface
- subinterface MTU setting (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- multiple
- Multiple VLAN Registration Protocol. Use
- Registration Protocol. Use
- Multiple Spanning Tree Protocol. Use
- multiport unicast entry (MAC address table), Types of MAC address entries, Adding or modifying a multiport unicast MAC address entry
- MVRP
- configuration, Configuring MVRP, MVRP configuration task list, MVRP configuration example
- configuration restrictions, Configuration restrictions and guidelines
- display, Displaying and maintaining MVRP
- enable, Enabling MVRP
- GVRP compatibility, Enabling GVRP compatibility
- maintain, Displaying and maintaining MVRP
- MRP implementation, MRP implementation
- protocols and standards, Protocols and standards
- registration mode setting, Setting an MVRP registration mode
- registration modes, MVRP registration modes
- timer set, Setting MRP timers
N
- network
- disabling the device to reactivate the shutdown edge ports, Disabling the device to reactivate the shutdown edge ports
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Ethernet link aggregation (dynamic mode), Aggregating links in dynamic mode
- Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- Ethernet link aggregation (static mode), Aggregating links in static mode
- Ethernet link aggregation configuration types, Configuration types
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface
- Ethernet link aggregation LACP, LACP
- Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Ethernet link aggregation member port state, Setting the aggregation state of each member port, Setting the aggregation state of each member port
- Ethernet link aggregation modes, Link aggregation modes
- Ethernet link aggregation operational key, Operational key
- Ethernet link aggregation reference port, Choosing a reference port
- Ethernet link aggregation reference port choice, Choosing a reference port
- interface auto power-down (Ethernet), Enabling auto power-down on an Ethernet interface
- interface basic settings (Ethernet), Configuring basic settings of an Ethernet interface
- interface bridging enable (Layer 2 Ethernet), Enabling bridging on an Ethernet interface
- interface cable connection (Layer 2 Ethernet), Testing the cable connection of an Ethernet interface
- interface common settings configuration (Ethernet), Configuring common Ethernet interface settings
- interface configuration (inloopback), Configuring an inloopback interface
- interface configuration (Layer 2 Ethernet), Configuring a Layer 2 Ethernet interface
- interface configuration (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- interface configuration (loopback), Configuring a loopback interface
- interface configuration (null), Configuring a null interface
- interface EEE (Ethernet), Enabling EEE energy saving for Ethernet interfaces in up state
- interface energy-saving features (Ethernet), Enabling energy saving features on an Ethernet interface
- interface fiber port (Layer 2 Ethernet), Forcibly bringing up a fiber port
- interface generic flow control (Ethernet), Configuring generic flow control on an Ethernet interface
- interface jumbo frame support (Ethernet), Configuring jumbo frame support
- interface link mode (Ethernet), Configuring the link mode of an Ethernet interface
- interface loopback test (Ethernet), Performing a loopback test on an Ethernet interface
- interface MAC address (Layer 3 Ethernet), Setting the MAC address for an Ethernet interface or subinterface
- interface MDIX mode (Layer 2 Ethernet), Setting the MDIX mode of an Ethernet interface
- interface MTU setting (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- interface PFC (Ethernet), Configuring PFC on an Ethernet interface
- interface physical state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- interface split (Ethernet 40-GE), Splitting a 40-GE interface and combining 10-GE breakout interfaces
- interface statistics polling interval (Ethernet), Setting the statistics polling interval
- interface storm control (Layer 2 Ethernet), Configuring storm control on an Ethernet interface
- interface storm suppression (Ethernet), Configuring storm suppression
- interfaces combine (Ethernet 10-GE into 40-GE), Splitting a 40-GE interface and combining 10-GE breakout interfaces
- IP subnet-based VLAN configuration, Configuring IP subnet-based VLANs, IP subnet-based VLAN configuration example
- LAN switching LLDP basic configuration, Performing basic LLDP configurations
- loop detection enable, Enabling loop detection
- loop detection interval, Loop detection interval, Setting the loop detection interval
- loop detection protection action configuration, Configuring the loop protection action
- loop protection actions, Loop protection actions
- MAC address move notification, Enable MAC address move notifications
- MAC address table address synchronization, Enabling MAC address synchronization
- MAC address table ARP fast update, Enabling ARP fast update for MAC address moves
- MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- MAC address table dynamic aging timer, Setting the aging timer for dynamic MAC address entries
- MAC address table entry configuration, Configuring MAC address entries
- MAC address table entry types, Types of MAC address entries
- MAC address table learning priority, Assigning MAC learning priority to an interface
- MAC address table multiport unicast entry, Adding or modifying a multiport unicast MAC address entry
- MAC address table SNMP notification, Enabling SNMP notifications for the MAC address table
- MAC Information configuration, MAC Information configuration example
- MAC-based VLAN assignment (dynamic), Configuring dynamic MAC-based VLAN assignment
- MAC-based VLAN assignment (server-assigned), Server-assigned MAC-based VLAN
- MAC-based VLAN assignment (static), Configuring static MAC-based VLAN assignment
- MAC-based VLAN configuration, Configuring MAC-based VLANs , MAC-based VLAN configuration example
- MAC-based VLAN configuration (server-assigned), Configuring server-assigned MAC-based VLAN
- management Ethernet interface configuration, Configuring a management Ethernet interface
- MRP timers, MRP timers
- MST region configuration, Configuring an MST region
- MVRP timer set, Setting MRP timers
- PBB frame format, PBB frame format
- PBB frame forwarding, PBB frame forwarding
- port isolation group assignment (multiple), Assigning a port to an isolation group
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- port-based VLAN assignment (hybrid port), Assigning a hybrid port to a VLAN
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- port-based VLAN configuration, Configuring port-based VLANs
- private VLAN promiscuous port configuration, Promiscuous port configuration example
- private VLAN trunk promiscuous port configuration, Trunk promiscuous port configuration example
- private VLAN trunk promiscuous+secondary port configuration, Trunk promiscuous and trunk secondary port configuration example
- protocol-based VLAN configuration, Configuring protocol-based VLANs, Protocol-based VLAN configuration example
- QinQ basic configuration, Basic QinQ configuration example
- QinQ CVLAN tag TPID value, Configuring the CVLAN TPID
- QinQ SVLAN tag TPID value, Configuring the SVLAN TPID
- QinQ VLAN tag TPID value, Configuring the TPID in VLAN tags
- QinQ VLAN transparent transmission, Configuring transparent transmission for VLANs
- QinQ VLAN transparent transmission configuration, VLAN transparent transmission configuration example
- remote fault signal detection (Ethernet), Disabling remote fault signal detection
- RSTP network convergence, RSTP
- secondary VLAN Layer 3 communication configuration, Secondary VLAN Layer 3 communication configuration example
- service loopback group configuration, Service loopback group configuration example
- spanning tree BPDU drop, Enabling BPDU drop
- spanning tree BPDU guard, Enabling BPDU guard
- spanning tree BPDU transmission rate, Configuring the BPDU transmission rate
- spanning tree BPDU transparent transmission (on port), Enabling BPDU transparent transmission on a port
- spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- spanning tree dispute guard, About dispute guard
- spanning tree edge port, Configuring edge ports
- spanning tree loop guard, Enabling loop guard
- spanning tree mode set, Setting the spanning tree mode
- spanning tree No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- spanning tree port link type, Configuring the port link type
- spanning tree port mode, Configuring the mode a port uses to recognize and send MSTP packets
- spanning tree port path cost, Configuring path costs of ports, Configuring path costs of ports
- spanning tree port priority, Configuring the port priority
- spanning tree port role restriction, Configuring port role restriction
- spanning tree port state transition, Enabling outputting port state transition information
- spanning tree priority, Configuring the device priority
- spanning tree protection functions, Configuring protection functions
- spanning tree root bridge, Configuring the root bridge or a secondary root bridge
- spanning tree root bridge (device), Configuring the current device as the root bridge of a specific spanning tree
- spanning tree root guard, Enabling root guard
- spanning tree secondary root bridge (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- spanning tree SNMP notification (new-root election, topology change events), Enabling SNMP notifications for new-root election and topology change events
- spanning tree switched network diameter, Configuring the network diameter of a switched network
- spanning tree TC Snooping, Configuring TC Snooping
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- STP algorithm calculation, Calculation process of the STP algorithm
- STP designated bridge, Designated bridge and designated port
- STP designated port, Designated bridge and designated port
- STP path cost, Path cost
- STP root bridge, Root bridge
- STP root port, Root port
- subinterface configuration (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- subinterface MAC address (Layer 3 Ethernet), Setting the MAC address for an Ethernet interface or subinterface
- subinterface MTU setting (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- super VLAN configuration, Configuring a super VLAN, Super VLAN configuration example
- super VLAN interface configuration, Configuring a super VLAN interface
- super VLAN sub-VLAN creation, Creating a sub-VLAN
- VLAN basic configuration, Configuring basic VLAN settings
- VLAN group configuration, Configuring a VLAN group
- VLAN interface basics, Configuring basic settings of a VLAN interface
- VLAN mapping 1:1 implementation, One-to-one VLAN mapping
- VLAN mapping 1:2 implementation, One-to-two VLAN mapping
- VLAN mapping 2:2 implementation, Two-to-two VLAN mapping
- VLAN mapping configuration (1:1), Configuring one-to-one VLAN mapping
- VLAN mapping configuration (1:2), Configuring one-to-two VLAN mapping
- VLAN mapping configuration (2:2), Configuring two-to-two VLAN mapping
- VLAN mapping configuration (M:1), Configuring many-to-one VLAN mapping
- VLAN mapping configuration (M:1) (dynamic IP address assignment), Configuring many-to-one VLAN mapping in a network with dynamic IP address assignment
- VLAN mapping configuration (M:1) (static IP address assignment), Configuring many-to-one VLAN mapping in a network with static IP address assignment
- VLAN mapping M:1 customer-side port (dynamic IP address assignment), Configuring the customer-side port
- VLAN mapping M:1 customer-side port (static IP address assignment), Configuring the customer-side port
- VLAN mapping M:1 implementation, Many-to-one VLAN mapping
- VLAN mapping M:1 network-side port (dynamic IP address assignment), Configuring the network-side port
- VLAN mapping M:1 network-side port (static IP address assignment), Configuring the network-side port
- VLAN port-based configuration, Port-based VLAN configuration example
- voice VLAN advertisement (LLDP/CDP), Configuring LLDP or CDP to advertise a voice VLAN
- voice VLAN assignment mode, Voice VLAN assignment modes
- voice VLAN assignment mode configuration (automatic), Automatic voice VLAN assignment mode configuration example
- voice VLAN assignment mode configuration (manual), Manual voice VLAN assignment mode configuration example
- voice VLAN configuration, Voice VLAN configuration examples
- voice VLAN host+IP phone connection (in series), Connecting the host and the IP phone in series
- voice VLAN information advertisement to IP phones, Advertising the voice VLAN information to IP phones
- voice VLAN IP phone access method, IP phone access methods
- voice VLAN IP phone identification (LLDP), Automatically identifying IP phones through LLDP
- voice VLAN IP phone identification (OUI address), Identifying IP phones through OUI addresses
- voice VLAN IP phone+device connection, Connecting the IP phone to the device
- voice VLAN LLDP automatic IP phone discovery enable, Enabling LLDP for automatic IP phone discovery
- voice VLAN port operation configuration (automatic assignment), Configuring a port to operate in automatic voice VLAN assignment mode
- voice VLAN port operation configuration (manual assignment), Configuring a port to operate in manual voice VLAN assignment mode
- voice VLAN port operation mode, Security mode and normal mode of voice VLANs
- voice VLAN traffic QoS priority settings, Configuring the QoS priority settings for voice traffic
- network management
- Ethernet link aggregation basic concepts, Basic concepts
- Ethernet link aggregation configuration, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- interface bulk configuration, Bulk configuring interfaces
- interface configuration (Ethernet), Configuring Ethernet interfaces
- interface configuration (inloopback), Configuring loopback, null, and inloopback interfaces
- interface configuration (loopback), Configuring loopback, null, and inloopback interfaces
- interface configuration (null), Configuring loopback, null, and inloopback interfaces
- LAN switching LLDP basic concepts, Basic concepts
- LAN switching LLDP basic configuration, Basic LLDP configuration example
- LAN switching LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- LAN switching LLDP configuration (CDP-compatible), CDP-compatible LLDP configuration example
- LAN switching LLDP DCBX configuration, Configuring DCBX, DCBX configuration example
- Layer 2 cut-through forwarding configuration, Configuring cut-through Layer 2 forwarding
- loop detection, Configuring loop detection
- loop detection configuration, Loop detection configuration task list, Loop detection configuration example
- MAC address table configuration, Configuring the MAC address table, MAC address table configuration task list , MAC address table configuration example
- MAC Information configuration, Configuring MAC Information
- MSTP configuration, MSTP configuration example
- MVRP, Configuring MVRP, MVRP configuration task list, MVRP configuration example
- PBB configuration, Configuring PBB, PBB configuration task list, PBB configuration example
- PBB network model, PBB network model
- port isolation configuration, Configuring port isolation
- port isolation configuration (multiple isolation groups), Port isolation configuration example
- private VLAN configuration, Configuring the private VLAN, Configuration procedure, Private VLAN configuration examples
- PVST configuration, PVST configuration example
- QinQ configuration, Configuring QinQ, QinQ configuration examples
- service loopback group configuration, Configuring service loopback groups
- spanning tree configuration, Configuring spanning tree protocols, Spanning tree configuration task lists, Spanning tree configuration example
- super VLAN configuration, Configuring super VLANs
- VLAN configuration, Configuring VLANs, VLAN configuration examples
- VLAN mapping configuration, Configuring VLAN mapping, VLAN mapping configuration task list, VLAN mapping configuration examples
- VLAN mapping configuration (1:1), One-to-one and many-to-one VLAN mapping configuration example
- VLAN mapping configuration (1:2), One-to-two and two-to-two VLAN mapping configuration example
- VLAN mapping configuration (2:2), One-to-two and two-to-two VLAN mapping configuration example
- VLAN mapping configuration (M:1), One-to-one and many-to-one VLAN mapping configuration example
- voice VLAN configuration, Configuring voice VLANs
- No Agreement Check (spanning tree), Configuring No Agreement Check, No Agreement Check configuration example
- no-learning action (loop detection), Loop protection actions
- normal
- voice VLAN operation mode, Security mode and normal mode of voice VLANs
- notification
- MAC address move, Enable MAC address move notifications
- notifying
- MAC address table SNMP notification, Enabling SNMP notifications for the MAC address table
- MAC Information change notification interval, Configuring the MAC change notification interval
- null interface
- configuration, Configuring loopback, null, and inloopback interfaces, Configuring a null interface
- display, Displaying and maintaining loopback, null, and inloopback interfaces
- maintain, Displaying and maintaining loopback, null, and inloopback interfaces
P
- packet
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- Ethernet link aggregation packet type-based load sharing, Load sharing modes for link aggregation groups
- LAN switching LLDP CDP compatibility, Configuring CDP compatibility
- LAN switching LLDP DCBX configuration, DCBX configuration example
- LAN switching LLDP PFC parameters, Configuring PFC parameters
- service loopback group configuration, Configuring service loopback groups, Service loopback group configuration example
- spanning tree port mode configuration, Configuring the mode a port uses to recognize and send MSTP packets
- STP BPDU protocol packets, STP protocol packets
- STP TCN BPDU protocol packets, STP protocol packets
- VLAN mapping configuration, Configuring VLAN mapping, VLAN mapping configuration task list, VLAN mapping configuration examples
- VLAN mapping configuration (1:1), Configuring one-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- VLAN mapping configuration (1:2), Configuring one-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- VLAN mapping configuration (2:2), Configuring two-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- VLAN mapping configuration (M:1), Configuring many-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- VLAN mapping configuration (M:1) (dynamic IP address assignment), Configuring many-to-one VLAN mapping in a network with dynamic IP address assignment
- VLAN mapping configuration (M:1) (static IP address assignment), Configuring many-to-one VLAN mapping in a network with static IP address assignment
- parameter
- LAN switching LLDP APP configuration, Configuring APP parameters
- LAN switching LLDP ETS configuration, Configuring ETS parameters
- LAN switching LLDP PFC configuration, Configuring PFC parameters
- spanning tree timeout factor, Configuring the timeout factor
- PBB
- configuration, Configuring PBB, PBB configuration task list, PBB configuration example
- data encapsulation type configuration, Configuring the data encapsulation type
- display, Displaying and maintaining PBB
- downlink port configuration, Configuring a downlink port
- frame format, PBB frame format
- frame forwarding, PBB frame forwarding
- L2VPN enable, Enabling L2VPN
- maintain, Displaying and maintaining PBB
- network model, PBB network model
- protocols and standards, Protocols and standards
- terminology, Terminology
- troubleshoot, Troubleshooting PBB
- troubleshoot customer frame peer transmission, Failed to transmit customer frames to peer
- uplink port configuration, Configuring an uplink port
- VSI B-VLAN configuration, Configuring a B-VLAN for a PBB VSI
- VSI creation, Creating a PBB VSI
- per-flow load sharing, Load sharing modes for link aggregation groups, Configuring per-flow load sharing algorithm settings for Ethernet link aggregation
- performing
- interface loopback test (Ethernet), Performing a loopback test on an Ethernet interface
- spanning tree mCheck, Performing mCheck
- per-packet load sharing, Load sharing modes for link aggregation groups
- Per-VLAN Spanning Tree Protocol. Use
- PFC (Ethernet interface), Configuring PFC on an Ethernet interface
- PFC priority (LLDP), Configuring PFC parameters
- physical
- interface physical state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- polling
- interface statistics polling interval (Ethernet), Setting the statistics polling interval
- LAN switching LLDP enable, Enabling LLDP polling
- port
- aggregate interface (MAC address), Setting the MAC address for a Layer 3 aggregate interface
- Ethernet aggregate interface, Configuring an aggregate interface
- Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- Ethernet link aggregate interface shutdown, Shutting down an aggregate interface
- Ethernet link aggregation (dynamic mode), Aggregating links in dynamic mode
- Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- Ethernet link aggregation (static mode), Aggregating links in static mode
- Ethernet link aggregation configuration, Configuring Ethernet link aggregation, Ethernet link aggregation configuration task list, Ethernet link aggregation configuration examples
- Ethernet link aggregation configuration types, Configuration types
- Ethernet link aggregation edge aggregate interface, Edge aggregate interface, Configuring an edge aggregate interface
- Ethernet link aggregation group, Configuring an aggregation group
- Ethernet link aggregation group (dynamic), Configuring a dynamic aggregation group
- Ethernet link aggregation group (Layer 2 static), Configuring a Layer 2 static aggregation group, Configuring a Layer 2 dynamic aggregation group
- Ethernet link aggregation group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- Ethernet link aggregation group (Layer 3 static), Configuring a Layer 3 static aggregation group
- Ethernet link aggregation group (static), Configuring a static aggregation group
- Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- Ethernet link aggregation LACP, LACP
- Ethernet link aggregation LACP port priority, LACP priorities
- Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- Ethernet link aggregation load sharing mode, Load sharing modes for link aggregation groups
- Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- Ethernet link aggregation member port, Aggregation group, member port, and aggregate interface
- Ethernet link aggregation member port state, Aggregation states of member ports in an aggregation group, Setting the aggregation state of each member port, Setting the aggregation state of each member port
- Ethernet link aggregation modes, Link aggregation modes
- Ethernet link aggregation operational key, Operational key
- Ethernet link aggregation per-flow load sharing algorithm settings, Configuring per-flow load sharing algorithm settings for Ethernet link aggregation
- Ethernet link aggregation reference port, Choosing a reference port
- Ethernet link aggregation reference port choice, Choosing a reference port
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- interface fiber port (Layer 2 Ethernet), Forcibly bringing up a fiber port
- isolation. See
- LAN switching LLDP basic configuration, Performing basic LLDP configurations, Basic LLDP configuration example
- LAN switching LLDP configuration, Configuring LLDP, LLDP configuration task list, LLDP configuration examples
- LAN switching LLDP disable operating mode, LLDP operating modes
- LAN switching LLDP enable, Enabling LLDP
- LAN switching LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- LAN switching LLDP frame reception, Receiving LLDP frames
- LAN switching LLDP frame transmission, Transmitting LLDP frames
- LAN switching LLDP operating mode, Setting the LLDP operating mode
- LAN switching LLDP polling, Enabling LLDP polling
- LAN switching LLDP reinitialization delay, Setting the LLDP reinitialization delay
- LAN switching LLDP Rx operating mode, LLDP operating modes
- LAN switching LLDP Tx operating mode, LLDP operating modes
- LAN switching LLDP TxRx operating mode, LLDP operating modes
- Layer 2 aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- Layer 3 aggregate interface configuration (MTU), Setting the MTU for a Layer 3 aggregate interface
- link aggregation management VLAN+management port, Specifying link aggregation management VLANs and management port
- loop detection configuration, Configuring loop detection, Loop detection configuration task list, Loop detection configuration example
- loop detection enable (port-specific), Enabling loop detection globally, Enabling loop detection on a port
- loop detection interval, Loop detection interval, Setting the loop detection interval
- loop detection protection action configuration, Configuring the loop protection action
- loop detection protection actions, Loop protection actions
- loop detection status auto recovery, Port status auto recovery
- MAC address learning, MAC address learning
- MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- MAC address table configuration, Configuring the MAC address table, MAC address table configuration task list , MAC address table configuration example
- MAC address table entry configuration, Configuring MAC address entries
- MAC address table multiport unicast entry, Adding or modifying a multiport unicast MAC address entry
- MAC Information configuration, Configuring MAC Information, MAC Information configuration example
- MST port roles, Port roles
- MST port states, Port states
- MVRP application, Configuring MVRP, MVRP configuration task list, MVRP configuration example
- MVRP timer set, Setting MRP timers
- PBB downlink port, Configuring a downlink port
- PBB uplink port, Configuring an uplink port
- QinQ implementation, QinQ implementations
- RSTP network convergence, RSTP
- service loopback group configuration, Configuring service loopback groups, Service loopback group configuration example
- spanning tree BPDU drop, Enabling BPDU drop
- spanning tree BPDU guard, Enabling BPDU guard
- spanning tree BPDU transmission rate, Configuring the BPDU transmission rate
- spanning tree BPDU transparent transmission (on port), Enabling BPDU transparent transmission on a port
- spanning tree dispute guard, About dispute guard
- spanning tree edge port configuration, Configuring edge ports
- spanning tree forward delay timer, Configuring spanning tree timers
- spanning tree loop guard, Enabling loop guard
- spanning tree path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- spanning tree path cost configuration, Configuring path costs of ports, Configuring path costs of ports
- spanning tree port link type configuration, Configuring the port link type
- spanning tree port mode configuration, Configuring the mode a port uses to recognize and send MSTP packets
- spanning tree port priority configuration, Configuring the port priority
- spanning tree port role restriction, Configuring port role restriction
- spanning tree port state transition output, Enabling outputting port state transition information
- spanning tree root guard, Enabling root guard
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- STP designated port, Designated bridge and designated port
- STP root port, Root port
- VLAN mapping M:1 customer-side port (dynamic IP address assignment), Configuring the customer-side port
- VLAN mapping M:1 customer-side port (static IP address assignment), Configuring the customer-side port
- VLAN mapping M:1 network-side port (dynamic IP address assignment), Configuring the network-side port
- VLAN mapping M:1 network-side port (static IP address assignment), Configuring the network-side port
- VLAN port link type, Port link type
- voice VLAN port operation configuration (automatic assignment), Configuring a port to operate in automatic voice VLAN assignment mode
- voice VLAN port operation configuration (manual assignment), Configuring a port to operate in manual voice VLAN assignment mode
- voice VLAN port operation mode, Security mode and normal mode of voice VLANs
- port isolation
- configuration, Configuring port isolation
- configuration (multiple isolation groups), Port isolation configuration example
- display, Displaying and maintaining port isolation
- port assignment to group (multiple), Assigning a port to an isolation group
- port-based VLAN
- assignment (access port), Assigning an access port to a VLAN
- assignment (hybrid port), Assigning a hybrid port to a VLAN
- assignment (trunk port), Assigning a trunk port to a VLAN
- configuration, Configuring port-based VLANs, Port-based VLAN configuration example
- port frame handling, How ports of different link types handle frames
- port link type, Port link type
- PVID, PVID
- power
- interface auto power-down (Ethernet), Enabling auto power-down on an Ethernet interface
- interface EEE (Ethernet), Enabling EEE energy saving for Ethernet interfaces in up state
- interface energy-saving features (Ethernet), Enabling energy saving features on an Ethernet interface
- priority
- 802.1p-to-local priority mapping, Configuring the 802.1p-to-local priority mapping
- Ethernet link aggregation LACP, LACP
- Ethernet link aggregation LACP port priority, LACP priorities
- Ethernet link aggregation LACP system priority, LACP priorities
- LAN switching LLDP PFC 802.1p priority, Configuring PFC parameters
- MAC address table learning priority, Assigning MAC learning priority to an interface
- priority-based flow control. Use PFC
- QinQ SVLAN tag 802.1p priority, Setting the 802.1p priority in SVLAN tags
- spanning tree device priority, Configuring the device priority
- spanning tree port priority configuration, Configuring the port priority
- private VLAN
- configuration, Configuring the private VLAN, Configuration procedure, Private VLAN configuration examples
- configuration restrictions, Configuration restrictions and guidelines
- display, Displaying and maintaining the private VLAN
- promiscuous port configuration, Promiscuous port configuration example
- secondary VLAN Layer 3 communication configuration, Secondary VLAN Layer 3 communication configuration example
- trunk promiscuous port configuration, Trunk promiscuous port configuration example
- trunk promiscuous+secondary port configuration, Trunk promiscuous and trunk secondary port configuration example
- procedure
- adding MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- adding MAC address table entry (global), Adding or modifying a static or dynamic MAC address entry globally
- adding MAC address table entry (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- adding MAC address table multiport unicast entry, Adding or modifying a multiport unicast MAC address entry
- assigning MAC address table learning priority to interface, Assigning MAC learning priority to an interface
- assigning port isolation group (multiple), Assigning a port to an isolation group
- assigning port-based VLAN access port (interface view), Assigning an access port to a VLAN in interface view
- assigning port-based VLAN access port (VLAN view), Assigning one or multiple access ports to a VLAN in VLAN view
- assigning port-based VLAN hybrid port, Assigning a hybrid port to a VLAN
- assigning port-based VLAN trunk port, Assigning a trunk port to a VLAN
- bulk configuring interfaces, Bulk configuring interfaces
- changing interface to FC interface (Layer 2 Ethernet), Changing a Layer 2 Ethernet interface to an FC interface
- combining interfaces (Ethernet 10-GE into 40-GE), Splitting a 40-GE interface and combining 10-GE breakout interfaces
- configuring Ethernet aggregate interface, Configuring an aggregate interface
- configuring Ethernet aggregate interface (description), Configuring the description of an aggregate interface
- configuring Ethernet aggregate interface (Layer 3 edge), Layer 3 edge aggregate interface configuration example
- configuring Ethernet link aggregate interface (Layer 2 edge), Layer 2 edge aggregate interface configuration example
- configuring Ethernet link aggregation, Ethernet link aggregation configuration task list
- configuring Ethernet link aggregation (Layer 2 dynamic), Layer 2 dynamic aggregation configuration example
- configuring Ethernet link aggregation (Layer 2 static), Layer 2 static aggregation configuration example
- configuring Ethernet link aggregation (Layer 3 dynamic), Layer 3 dynamic aggregation configuration example
- configuring Ethernet link aggregation (Layer 3 static), Layer 3 static aggregation configuration example
- configuring Ethernet link aggregation edge aggregate interface, Configuring an edge aggregate interface
- configuring Ethernet link aggregation group, Configuring an aggregation group
- configuring Ethernet link aggregation group (dynamic), Configuring a dynamic aggregation group
- configuring Ethernet link aggregation group (Layer 2 dynamic), Configuring a Layer 2 dynamic aggregation group
- configuring Ethernet link aggregation group (Layer 2 static), Configuring a Layer 2 static aggregation group
- configuring Ethernet link aggregation group (Layer 3 dynamic), Configuring a Layer 3 dynamic aggregation group
- configuring Ethernet link aggregation group (Layer 3 static), Configuring a Layer 3 static aggregation group
- configuring Ethernet link aggregation group (static), Configuring a static aggregation group
- configuring Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- configuring Ethernet link aggregation group load sharing, Configuring load sharing for link aggregation groups
- configuring Ethernet link aggregation load sharing (Layer 2), Layer 2 aggregation load sharing configuration example
- configuring Ethernet link aggregation per-flow load sharing algorithm settings, Configuring per-flow load sharing algorithm settings for Ethernet link aggregation
- configuring ignored field for load sharing, Configuring the ignored fields for the default load sharing mode
- configuring interface (inloopback), Configuring an inloopback interface
- configuring interface (Layer 2 Ethernet), Configuring a Layer 2 Ethernet interface
- configuring interface (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- configuring interface (loopback), Configuring a loopback interface
- configuring interface (null), Configuring a null interface
- configuring interface auto power-down (Ethernet), Enabling auto power-down on an Ethernet interface
- configuring interface basic settings (Ethernet), Configuring basic settings of an Ethernet interface
- configuring interface common settings (Ethernet), Configuring common Ethernet interface settings
- configuring interface EEE (Ethernet), Enabling EEE energy saving for Ethernet interfaces in up state
- configuring interface energy-saving features (Ethernet), Enabling energy saving features on an Ethernet interface
- configuring interface generic flow control (Ethernet), Configuring generic flow control on an Ethernet interface
- configuring interface jumbo frame support (Ethernet), Configuring jumbo frame support
- configuring interface link mode (Ethernet), Configuring the link mode of an Ethernet interface
- configuring interface PFC (Ethernet), Configuring PFC on an Ethernet interface
- configuring interface physical state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- configuring interface storm control (Layer 2 Ethernet), Configuring storm control on an Ethernet interface
- configuring interface storm suppression (Ethernet), Configuring storm suppression
- configuring IP subnet-based VLAN, Configuring IP subnet-based VLANs, IP subnet-based VLAN configuration example
- configuring LAN switching LLDP, LLDP configuration task list, LLDP configuration examples
- configuring LAN switching LLDP (CDP-compatible), CDP-compatible LLDP configuration example
- configuring LAN switching LLDP 802.1p-to-local priority mapping, Configuring the 802.1p-to-local priority mapping
- configuring LAN switching LLDP advertisable TLVs, Configuring the advertisable TLVs
- configuring LAN switching LLDP APP parameters, Configuring APP parameters
- configuring LAN switching LLDP basics, Performing basic LLDP configurations, Basic LLDP configuration example
- configuring LAN switching LLDP bridge mode, Configuring the LLDP bridge mode
- configuring LAN switching LLDP CDP compatibility, Configuring CDP compatibility
- configuring LAN switching LLDP DCBX, Configuring DCBX, DCBX configuration example
- configuring LAN switching LLDP ETS parameters, Configuring ETS parameters
- configuring LAN switching LLDP group-based WRR queuing, Configuring group-based WRR queuing
- configuring LAN switching LLDP management address, Configuring the management address and its encoding format
- configuring LAN switching LLDP management address encoding format, Configuring the management address and its encoding format
- configuring LAN switching LLDP PFC parameters, Configuring PFC parameters
- configuring LAN switching LLDP trapping, Configuring LLDP trapping and LLDP-MED trapping
- configuring LAN switching LLDP-MED trapping, Configuring LLDP trapping and LLDP-MED trapping
- configuring LAN switching QinQ CVLAN tag TPID value, Configuring the CVLAN TPID
- configuring LAN switching QinQ SVLAN tag TPID value, Configuring the SVLAN TPID
- configuring LAN switching QinQ VLAN tag TPID value, Configuring the TPID in VLAN tags
- configuring Layer 2 cut-through forwarding, Configuring cut-through Layer 2 forwarding
- configuring LLDP neighbor aging, Configuring LLDP neighbor validation and aging, Configuring LLDP neighbor aging
- configuring LLDP neighbor validation, Configuring LLDP neighbor validation and aging, Configuring LLDP neighbor validation
- configuring loop detection, Loop detection configuration task list, Loop detection configuration example
- configuring loop detection protection action, Configuring the loop protection action
- configuring loop detection protection action (global), Configuring the global loop protection action
- configuring loop detection protection action (Layer 2 aggregate interface), Configuring the loop protection action on a Layer 2 aggregate interface
- configuring loop detection protection action (Layer 2 Ethernet interface), Configuring the loop protection action on a Layer 2 Ethernet interface
- configuring MAC address table, MAC address table configuration task list , MAC address table configuration example
- configuring MAC address table multiport unicast entry (global), Configuring a multiport unicast MAC address entry globally
- configuring MAC address table multiport unicast entry (on interface), Configuring a multiport unicast MAC address entry on an interface
- configuring MAC address table unknown frame forwarding rule, Configuring the device to forward unknown frames after the MAC learning limit on an interface is reached
- configuring MAC Information, MAC Information configuration example
- configuring MAC Information mode, Configuring the MAC Information mode
- configuring MAC-based VLAN, Configuring MAC-based VLANs , MAC-based VLAN configuration example
- configuring MAC-based VLAN (server-assigned), Configuring server-assigned MAC-based VLAN
- configuring MAC-based VLAN assignment (dynamic), Configuring dynamic MAC-based VLAN assignment
- configuring MAC-based VLAN assignment (static), Configuring static MAC-based VLAN assignment
- configuring management Ethernet interface, Configuring a management Ethernet interface
- configuring MST region, Configuring an MST region
- configuring MST region max hops, Configuring the maximum hops of an MST region
- configuring MSTP, MSTP configuration task list, MSTP configuration example
- configuring MVRP, MVRP configuration task list, MVRP configuration example
- configuring PBB, PBB configuration task list, PBB configuration example
- configuring PBB data encapsulation type, Configuring the data encapsulation type, Configuring the data encapsulation type
- configuring PBB downlink port, Configuring a downlink port
- configuring PBB uplink port, Configuring an uplink port
- configuring PBB VSI B-VLAN, Configuring a B-VLAN for a PBB VSI
- configuring port isolation (multiple isolation groups), Port isolation configuration example
- configuring port-based VLAN, Configuring port-based VLANs, Port-based VLAN configuration example
- configuring private VLAN, Configuration procedure
- configuring private VLAN promiscuous port, Promiscuous port configuration example
- configuring private VLAN trunk promiscuous port, Trunk promiscuous port configuration example
- configuring private VLAN trunk promiscuous+secondary port, Trunk promiscuous and trunk secondary port configuration example
- configuring protocol-based VLAN, Configuring protocol-based VLANs, Protocol-based VLAN configuration example
- configuring PVST, PVST configuration task list, PVST configuration example
- configuring QinQ, QinQ configuration examples
- configuring QinQ basics, Basic QinQ configuration example
- configuring QinQ VLAN transparent transmission, Configuring transparent transmission for VLANs, VLAN transparent transmission configuration example
- configuring RSTP, RSTP configuration task list
- configuring secondary VLAN Layer 3 communication, Secondary VLAN Layer 3 communication configuration example
- configuring service loopback group, Configuration procedure, Service loopback group configuration example
- configuring spanning tree, Spanning tree configuration task lists, Spanning tree configuration example
- configuring spanning tree BPDU transmission rate, Configuring the BPDU transmission rate
- configuring spanning tree device priority, Configuring the device priority
- configuring spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- configuring spanning tree edge port, Configuring edge ports
- configuring spanning tree No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- configuring spanning tree port link type, Configuring the port link type
- configuring spanning tree port mode for MSTP packets, Configuring the mode a port uses to recognize and send MSTP packets
- configuring spanning tree port path cost, Configuring path costs of ports, Configuring path costs of ports
- configuring spanning tree port priority, Configuring the port priority
- configuring spanning tree port role restriction, Configuring port role restriction
- configuring spanning tree protection functions, Configuring protection functions
- configuring spanning tree root bridge, Configuring the root bridge or a secondary root bridge
- configuring spanning tree root bridge (device), Configuring the current device as the root bridge of a specific spanning tree
- configuring spanning tree secondary root bridge, Configuring the root bridge or a secondary root bridge
- configuring spanning tree secondary root bridge (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- configuring spanning tree switched network diameter, Configuring the network diameter of a switched network
- configuring spanning tree TC Snooping, Configuring TC Snooping
- configuring spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- configuring spanning tree timeout factor, Configuring the timeout factor
- configuring spanning tree timer, Configuring spanning tree timers
- configuring STP, STP configuration task list
- configuring subinterface (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- configuring super VLAN, Super VLAN configuration task list, Configuring a super VLAN, Super VLAN configuration example
- configuring super VLAN interface, Configuring a super VLAN interface
- configuring VLAN basic settings, Configuring basic VLAN settings
- configuring VLAN group, Configuring a VLAN group
- configuring VLAN interface basics, Configuring basic settings of a VLAN interface
- configuring VLAN mapping, VLAN mapping configuration task list, VLAN mapping configuration examples
- configuring VLAN mapping (1:1), Configuring one-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- configuring VLAN mapping (1:2), Configuring one-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- configuring VLAN mapping (2:2), Configuring two-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- configuring VLAN mapping (M:1), Configuring many-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- configuring VLAN mapping (M:1) (dynamic IP address assignment), Configuring many-to-one VLAN mapping in a network with dynamic IP address assignment
- configuring VLAN mapping (M:1) (static IP address assignment), Configuring many-to-one VLAN mapping in a network with static IP address assignment
- configuring VLAN mapping M:1 customer-side port (dynamic IP address assignment), Configuring the customer-side port
- configuring VLAN mapping M:1 customer-side port (static IP address assignment), Configuring the customer-side port
- configuring VLAN mapping M:1 network-side port (dynamic IP address assignment), Configuring the network-side port
- configuring VLAN mapping M:1 network-side port (static IP address assignment), Configuring the network-side port
- configuring voice VLAN advertisement (LLDP/CDP), Configuring LLDP or CDP to advertise a voice VLAN
- configuring voice VLAN assignment mode (automatic), Automatic voice VLAN assignment mode configuration example
- configuring voice VLAN assignment mode (manual), Manual voice VLAN assignment mode configuration example
- configuring voice VLAN port operation (automatic assignment), Configuring a port to operate in automatic voice VLAN assignment mode
- configuring voice VLAN port operation (manual assignment), Configuring a port to operate in manual voice VLAN assignment mode
- configuring voice VLAN traffic QoS priority settings, Configuring the QoS priority settings for voice traffic
- creating PBB VSI, Creating a PBB VSI
- creating super VLAN sub-VLAN, Creating a sub-VLAN
- disabling LLDP PVID inconsistency check, Disabling LLDP PVID inconsistency check
- disabling MAC address learning (global), Disabling global MAC address learning
- disabling MAC address learning (on VLAN), Disabling MAC address learning on a VLAN
- disabling remote fault signal detection (Ethernet), Disabling remote fault signal detection
- disabling static source check, Disabling static source check
- disabling the device to reactivate the shutdown edge ports, Disabling the device to reactivate the shutdown edge ports
- displaying bulk interface configuration, Displaying and maintaining bulk interface configuration
- displaying Ethernet link aggregation, Displaying and maintaining Ethernet link aggregation
- displaying interface, Displaying and maintaining loopback, null, and inloopback interfaces
- displaying interface (Ethernet), Displaying and maintaining an Ethernet interface
- displaying LAN switching LLDP, Displaying and maintaining LLDP
- displaying loop detection, Displaying and maintaining loop detection
- displaying MAC address table, Displaying and maintaining the MAC address table
- displaying MVRP, Displaying and maintaining MVRP
- displaying PBB, Displaying and maintaining PBB
- displaying port isolation, Displaying and maintaining port isolation
- displaying private VLAN, Displaying and maintaining the private VLAN
- displaying QinQ, Displaying and maintaining QinQ
- displaying service loopback group, Displaying and maintaining service loopback groups
- displaying spanning tree, Displaying and maintaining the spanning tree
- displaying subinterface (Ethernet), Displaying and maintaining an Ethernet interface
- displaying super VLAN, Displaying and maintaining super VLANs
- displaying VLAN, Displaying and maintaining VLANs
- displaying VLAN mapping, Displaying and maintaining VLAN mapping
- displaying voice VLAN, Displaying and maintaining voice VLANs
- enable interface bridging (Layer 2 Ethernet), Enabling bridging on an Ethernet interface
- enabling BPDU guard on an interface, Configuring BPDU guard on an interface
- enabling Ethernet link aggregation local-first load sharing, Enabling local-first load sharing for link aggregation
- enabling Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- enabling global BPDU guard, Enabling BPDU guard globally
- enabling LAN switching LLDP, Enabling LLDP
- enabling LAN switching LLDP polling, Enabling LLDP polling
- enabling LAN switching LLDP+DCBX TLV advertisement, Enabling LLDP and DCBX TLV advertising
- enabling loop detection (global), Enabling loop detection globally
- enabling loop detection (port-specific), Enabling loop detection on a port
- enabling MAC address move notification, Enable MAC address move notifications
- enabling MAC address synchronization, Enabling MAC address synchronization
- enabling MAC address table ARP fast update, Enabling ARP fast update for MAC address moves
- enabling MAC address table SNMP notification, Enabling SNMP notifications for the MAC address table
- enabling MAC Information, Enabling MAC Information
- enabling MVRP, Enabling MVRP
- enabling MVRP GVRP compatibility, Enabling GVRP compatibility
- enabling PBB L2VPN, Enabling L2VPN
- enabling QinQ, Enabling QinQ
- enabling spanning tree BPDU drop, Enabling BPDU drop
- enabling spanning tree BPDU guard, Enabling BPDU guard
- enabling spanning tree BPDU transparent transmission (on port), Enabling BPDU transparent transmission on a port
- enabling spanning tree dispute guard, About dispute guard
- enabling spanning tree feature, Enabling the spanning tree feature
- enabling spanning tree loop guard, Enabling loop guard
- enabling spanning tree port state transition information output, Enabling outputting port state transition information
- enabling spanning tree root guard, Enabling root guard
- enabling spanning tree SNMP notification (new-root election, topology change events), Enabling SNMP notifications for new-root election and topology change events
- enabling spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- enabling VLAN mapping M:1 ARP detection (dynamic IP address assignment), Enabling ARP detection
- enabling VLAN mapping M:1 ARP snooping (static IP address assignment), Enabling ARP snooping
- enabling VLAN mapping M:1 DHCP snooping (dynamic IP address assignment), Enabling DHCP snooping
- enabling voice VLAN LLDP automatic IP phone discovery, Enabling LLDP for automatic IP phone discovery
- forcing interface fiber port (Layer 2 Ethernet), Forcibly bringing up a fiber port
- maintaining Ethernet link aggregation, Displaying and maintaining Ethernet link aggregation
- maintaining interface, Displaying and maintaining loopback, null, and inloopback interfaces
- maintaining interface (Ethernet), Displaying and maintaining an Ethernet interface
- maintaining MVRP, Displaying and maintaining MVRP
- maintaining PBB, Displaying and maintaining PBB
- maintaining spanning tree, Displaying and maintaining the spanning tree
- maintaining subinterface (Ethernet), Displaying and maintaining an Ethernet interface
- maintaining VLAN, Displaying and maintaining VLANs
- modifying MAC address table blackhole entry, Adding or modifying a blackhole MAC address entry
- modifying MAC address table entry (global), Adding or modifying a static or dynamic MAC address entry globally
- modifying MAC address table entry (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- modifying MAC address table multiport unicast entry, Adding or modifying a multiport unicast MAC address entry
- performing interface loopback test (Ethernet), Performing a loopback test on an Ethernet interface
- performing spanning tree mCheck, Performing mCheck
- restoring Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- setting Ethernet aggregate interface (MAC address), Setting the MAC address for a Layer 3 aggregate interface
- setting Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- setting Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- setting Ethernet link aggregation load sharing mode (global), Setting the global link-aggregation load sharing mode
- setting Ethernet link aggregation load sharing mode (group-specific), Setting the group-specific load sharing mode
- setting Ethernet link aggregation load sharing mode for MAC-in-MAC traffic (global), Setting the global load sharing mode for MAC-in-MAC traffic
- setting interface connection distance (Layer 2 Ethernet), Setting the interface connection distance
- setting interface MAC address (Layer 3 Ethernet), Setting the MAC address for an Ethernet interface or subinterface
- setting interface MDIX mode (Layer 2 Ethernet), Setting the MDIX mode of an Ethernet interface
- setting interface MTU (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- setting interface statistics polling interval (Ethernet), Setting the statistics polling interval
- setting LAN switching LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- setting LAN switching LLDP operating mode, Setting the LLDP operating mode
- setting LAN switching LLDP parameters, Setting other LLDP parameters
- setting LAN switching LLDP reinitialization delay, Setting the LLDP reinitialization delay
- setting Layer 3 aggregate interface (MTU), Setting the MTU for a Layer 3 aggregate interface
- setting loop detection interval, Setting the loop detection interval
- setting MAC address table dynamic aging timer, Setting the aging timer for dynamic MAC address entries
- setting MAC address table learning limit on interface, Setting the MAC learning limit on an interface
- setting MAC Information change notification interval, Configuring the MAC change notification interval
- setting MAC Information queue length, Configuring the MAC Information queue length
- setting MVRP registration mode, Setting an MVRP registration mode
- setting MVRP timer, Setting MRP timers
- setting QinQ SVLAN tag 802.1p priority, Setting the 802.1p priority in SVLAN tags
- setting spanning tree mode, Setting the spanning tree mode
- setting subinterface MAC address (Layer 3 Ethernet), Setting the MAC address for an Ethernet interface or subinterface
- setting subinterface MTU (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- shutting down Ethernet link aggregate interface, Shutting down an aggregate interface
- specifying Layer 2 aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- specifying link aggregation management subnet, Specifying a link aggregation management subnet
- specifying link aggregation management VLAN+management port, Specifying link aggregation management VLANs and management port, Specifying link aggregation management VLANs and management port
- specifying spanning tree port path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- splitting interface (Ethernet 40-GE), Splitting a 40-GE interface and combining 10-GE breakout interfaces
- testing interface cable connection (Layer 2 Ethernet), Testing the cable connection of an Ethernet interface
- troubleshooting PBB customer frame peer transmission, Failed to transmit customer frames to peer
- promiscuous
- private VLAN promiscuous port configuration, Promiscuous port configuration example
- private VLAN trunk promiscuous port configuration, Trunk promiscuous port configuration example
- private VLAN trunk promiscuous+secondary port configuration, Trunk promiscuous and trunk secondary port configuration example
- protecting
- disabling the device to reactivate the shutdown edge ports, Disabling the device to reactivate the shutdown edge ports
- spanning tree protection functions, Configuring protection functions
- spanning tree SNMP notification (new-root election, topology change events), Enabling SNMP notifications for new-root election and topology change events
- protocol-based VLAN
- configuration, Configuring protocol-based VLANs, Protocol-based VLAN configuration example
- protocols and standards
- Ethernet link aggregation protocol configuration, Configuration types
- LAN switching LLDP, Protocols and standards
- MSTP, Protocols and standards
- MVRP, Protocols and standards
- PBB, Protocols and standards
- QinQ, Protocols and standards
- STP protocol packets, STP protocol packets
- VLAN, Protocols and standards
- provider
- backbone bridge. Use
- backbone bridge network. See PBBN
- backbone network. See PBN
- PVID (port-based VLAN), PVID
- PVST, Configuring spanning tree protocols, See also
- configuration, PVST configuration task list, PVST configuration example
- feature enable, Enabling the spanning tree feature in PVST mode
- mode set, Setting the spanning tree mode
- port links, PVST
Q
- QinQ
- basic configuration, Basic QinQ configuration example
- configuration, Configuring QinQ, QinQ configuration examples
- configuration restrictions, Restrictions and guidelines
- CVLAN tag, How QinQ works
- CVLAN tag TPID value, Configuring the CVLAN TPID
- display, Displaying and maintaining QinQ
- enable, Enabling QinQ
- how it works, How QinQ works
- implementation, QinQ implementations
- loop detection configuration, Configuring loop detection, Loop detection configuration task list, Loop detection configuration example
- protocols and standards, Protocols and standards
- SVLAN tag, How QinQ works
- SVLAN tag 802.1p priority, Setting the 802.1p priority in SVLAN tags
- SVLAN tag TPID value, Configuring the SVLAN TPID
- VLAN tag TPID value, Configuring the TPID in VLAN tags
- VLAN transparent transmission, Configuring transparent transmission for VLANs
- VLAN transparent transmission configuration, VLAN transparent transmission configuration example
- QoS
- LAN switching LLDP 802.1p-to-local priority mapping, Configuring the 802.1p-to-local priority mapping
- LAN switching LLDP APP parameters, Configuring APP parameters
- LAN switching LLDP ETS parameters, Configuring ETS parameters
- LAN switching LLDP group-based WRR queuing, Configuring group-based WRR queuing
- LAN switching LLDP PFC parameters, Configuring PFC parameters
- QinQ SVLAN tag 802.1p priority, Setting the 802.1p priority in SVLAN tags
- voice VLAN traffic QoS priority settings, Configuring the QoS priority settings for voice traffic
- queuing
- MAC Information queue length, Configuring the MAC Information queue length
R
- Rapid Spanning Tree Protocol. Use
- rate
- spanning tree BPDU transmission rate, Configuring the BPDU transmission rate
- receiving
- LAN switching LLDP frames, Receiving LLDP frames
- recovering
- loop detection port status auto recovery, Port status auto recovery
- redirecting
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- reference port (Ethernet link aggregation), Choosing a reference port, Choosing a reference port
- region
- MST, MST region
- MST region configuration, Configuring an MST region
- MST region max hops, Configuring the maximum hops of an MST region
- MST regional root, Regional root
- registering
- MVRP registration fixed mode, MVRP registration modes
- MVRP registration forbidden mode, MVRP registration modes
- MVRP registration mode, Setting an MVRP registration mode
- MVRP registration normal mode, MVRP registration modes
- reinitialization delay (LLDP), Setting the LLDP reinitialization delay
- restoring
- Ethernet link aggregate interface default settings, Restoring the default settings for an aggregate interface
- restrictions
- bulk interface configuration, Configuration restrictions and guidelines
- Ethernet interface storm suppression, Configuration restrictions and guidelines
- Ethernet link aggregation group, Configuration restrictions and guidelines
- Ethernet link aggregation traffic redirection, Configuration restrictions and guidelines
- interface loopback test (Ethernet), Configuration restrictions and guidelines
- LAN switching STP Digest Snooping configuration, Configuration restrictions and guidelines
- LAN switching STP edge port configuration, Configuration restrictions and guidelines
- LAN switching STP mCheck configuration, Configuration restrictions and guidelines
- LAN switching STP port link type configuration, Configuration restrictions and guidelines
- LAN switching STP TC Snooping configuration, Configuration restrictions and guidelines
- LAN switching STP timer configuration, Configuration restrictions and guidelines
- MAC Information configuration, Configuration restrictions and guidelines
- MAC-based VLAN configuration, Configuration restrictions and guidelines
- MVRP configuration, Configuration restrictions and guidelines
- private VLAN configuration, Configuration restrictions and guidelines
- QinQ configuration, Restrictions and guidelines
- spanning tree port role restriction, Configuring port role restriction
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- voice VLAN LLDP automatic IP phone discovery enable, Configuration restrictions and guidelines
- voice VLAN port operation configuration (automatic assignment), Configuration restrictions and guidelines
- voice VLAN port operation configuration restrictions (manual assignment), Configuration restrictions and guidelines
- root
- MST common root bridge, Common root bridge
- MST regional root, Regional root
- MST root port role, Port roles
- spanning tree root bridge, Configuring the root bridge or a secondary root bridge
- spanning tree root bridge (device), Configuring the current device as the root bridge of a specific spanning tree
- spanning tree root guard, Enabling root guard
- spanning tree secondary root bridge (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- STP algorithm calculation, Calculation process of the STP algorithm
- STP root bridge, Root bridge
- STP root port, Root port
- routing
- IP subnet-based VLAN configuration, Configuring IP subnet-based VLANs, IP subnet-based VLAN configuration example
- MAC-based VLAN assignment (dynamic), Configuring dynamic MAC-based VLAN assignment
- MAC-based VLAN assignment (static), Configuring static MAC-based VLAN assignment
- MAC-based VLAN configuration, Configuring MAC-based VLANs , MAC-based VLAN configuration example
- MAC-based VLAN configuration (server-assigned), Configuring server-assigned MAC-based VLAN
- protocol-based VLAN configuration, Configuring protocol-based VLANs, Protocol-based VLAN configuration example
- voice VLAN configuration, Configuring voice VLANs, Voice VLAN configuration examples
- voice VLAN IP phone access method, IP phone access methods
- RSTP, Configuring spanning tree protocols, See also
- configuration, RSTP configuration task list
- feature enable, Enabling the spanning tree feature in STP/RSTP/MSTP mode
- mode set, Setting the spanning tree mode
- MSTP device implementation, MSTP implementation on devices
- network convergence, RSTP
- rule
- MAC address table unknown frame forwarding rule, Configuring the device to forward unknown frames after the MAC learning limit on an interface is reached
S
- security
- voice VLAN operation mode, Security mode and normal mode of voice VLANs
- selecting
- Ethernet link aggregation Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregation selected state, Aggregation states of member ports in an aggregation group
- Ethernet link aggregation unselected state, Aggregation states of member ports in an aggregation group
- series
- voice VLAN host+IP phone connection (in series), Connecting the host and the IP phone in series
- server
- MAC-based VLAN assignment (server-assigned), Server-assigned MAC-based VLAN
- MAC-based VLAN configuration (server-assigned), Configuring server-assigned MAC-based VLAN
- service
- LAN switching LLDP service bridge mode, Configuring the LLDP bridge mode
- service loopback group
- configuration, Configuring service loopback groups, Service loopback group configuration example
- display, Displaying and maintaining service loopback groups
- setting
- Ethernet aggregate interface (MAC address), Setting the MAC address for a Layer 3 aggregate interface
- Ethernet link aggregate group Selected ports min/max, Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Ethernet link aggregate interface (expected bandwidth), Setting the expected bandwidth for an aggregate interface
- Ethernet link aggregation load sharing mode (global), Setting the global link-aggregation load sharing mode
- Ethernet link aggregation load sharing mode (group-specific), Setting the group-specific load sharing mode
- Ethernet link aggregation load sharing mode for MAC-in-MAC traffic (global), Setting the global load sharing mode for MAC-in-MAC traffic
- Ethernet link aggregation member port state, Setting the aggregation state of each member port, Setting the aggregation state of each member port
- interface connection distance (Layer 2 Ethernet), Setting the interface connection distance
- interface MAC address (Layer 3 Ethernet), Setting the MAC address for an Ethernet interface or subinterface
- interface MDIX mode (Layer 2 Ethernet), Setting the MDIX mode of an Ethernet interface
- interface MTU (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- interface statistics polling interval (Ethernet), Setting the statistics polling interval
- LAN switching LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- LAN switching LLDP operating mode, Setting the LLDP operating mode
- LAN switching LLDP parameters, Setting other LLDP parameters
- LAN switching LLDP reinitialization delay, Setting the LLDP reinitialization delay
- Layer 3 aggregate interface (MTU), Setting the MTU for a Layer 3 aggregate interface
- loop detection interval, Setting the loop detection interval
- MAC address table dynamic aging timer, Setting the aging timer for dynamic MAC address entries
- MAC address table learning limit on interface, Setting the MAC learning limit on an interface
- MAC Information change notification interval, Configuring the MAC change notification interval
- MAC Information queue length, Configuring the MAC Information queue length
- MVRP registration mode, Setting an MVRP registration mode
- MVRP timer, Setting MRP timers
- QinQ SVLAN tag 802.1p priority, Setting the 802.1p priority in SVLAN tags
- spanning tree mode, Setting the spanning tree mode
- subinterface MAC address (Layer 3 Ethernet), Setting the MAC address for an Ethernet interface or subinterface
- subinterface MTU (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- shutting down
- Ethernet link aggregate interface, Shutting down an aggregate interface
- loop detection shutdown action, Loop protection actions
- SNAP
- LAN switching LLDP frame encapsulated in SNAP format, LLDP frame formats
- LAN switching LLDP frame encapsulation format, Setting an encapsulation format for LLDP frames
- SNMP
- MAC address table SNMP notification, Enabling SNMP notifications for the MAC address table
- MAC Information configuration, Configuring MAC Information, MAC Information configuration example
- snooping
- spanning tree Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- spanning tree TC Snooping, Configuring TC Snooping
- spanning tree, Configuring spanning tree protocols, See also STP, RSTP, PVST, MSTP
- BPDU drop, Enabling BPDU drop
- BPDU guard enable, Enabling BPDU guard
- BPDU transmission rate configuration, Configuring the BPDU transmission rate
- BPDU transparent transmission (on port), Enabling BPDU transparent transmission on a port
- configuration, Configuring spanning tree protocols, Spanning tree configuration task lists, Spanning tree configuration example
- device priority configuration, Configuring the device priority
- Digest Snooping, Configuring Digest Snooping, Digest Snooping configuration example
- disabling the device to reactivate the shutdown edge ports, Disabling the device to reactivate the shutdown edge ports
- displaying, Displaying and maintaining the spanning tree
- dispute guard enable, About dispute guard
- edge port configuration, Configuring edge ports
- feature enable, Enabling the spanning tree feature
- loop guard enable, Enabling loop guard
- maintaining, Displaying and maintaining the spanning tree
- mCheck, Performing mCheck
- mode set, Setting the spanning tree mode
- MST region max hops, Configuring the maximum hops of an MST region
- MSTP, MSTP, See also
- No Agreement Check, Configuring No Agreement Check, No Agreement Check configuration example
- port link type configuration, Configuring the port link type
- port mode configuration, Configuring the mode a port uses to recognize and send MSTP packets
- port path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- port path cost configuration, Configuring path costs of ports, Configuring path costs of ports
- port priority configuration, Configuring the port priority
- port role restriction, Configuring port role restriction
- port state transition output, Enabling outputting port state transition information
- protection functions, Configuring protection functions
- PVST, PVST, See also
- root bridge configuration, Configuring the root bridge or a secondary root bridge
- root bridge configuration (device), Configuring the current device as the root bridge of a specific spanning tree
- root guard enable, Enabling root guard
- RSTP, RSTP, See also
- secondary root bridge configuration (device), Configuring the current device as a secondary root bridge of a specific spanning tree
- SNMP notification enable (new-root election, topology change events), Enabling SNMP notifications for new-root election and topology change events
- switched network diameter, Configuring the network diameter of a switched network
- TC Snooping, Configuring TC Snooping
- TC-BPDU guard, Enabling TC-BPDU guard
- TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- timeout factor configuration, Configuring the timeout factor
- timer configuration, Configuring spanning tree timers
- specifying
- Layer 2 aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- link aggregation management subnet, Specifying a link aggregation management subnet, Specifying a link aggregation management subnet
- link aggregation management VLAN+management port, Specifying link aggregation management VLANs and management port
- spanning tree port path cost calculation standard, Specifying a standard for the device to use when it calculates the default path cost
- splitting
- interface (Ethernet 40-GE), Splitting a 40-GE interface and combining 10-GE breakout interfaces
- state
- Ethernet link aggregation member port state, Aggregation states of member ports in an aggregation group, Setting the aggregation state of each member port, Setting the aggregation state of each member port
- interface state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- static
- Ethernet link aggregation (Layer 2), Layer 2 static aggregation configuration example
- Ethernet link aggregation (Layer 3), Layer 3 static aggregation configuration example
- Ethernet link aggregation (static mode), Aggregating links in static mode
- Ethernet link aggregation group, Configuring a static aggregation group
- Ethernet link aggregation group BFD, Enabling BFD for an aggregation group
- Ethernet link aggregation mode, Link aggregation modes
- Layer 2 Ethernet link aggregation group, Configuring a Layer 2 static aggregation group
- Layer 3 Ethernet link aggregation group, Configuring a Layer 3 static aggregation group
- MAC address table entry, Types of MAC address entries
- MAC address table entry configuration (global), Adding or modifying a static or dynamic MAC address entry globally
- MAC address table entry configuration (on interface), Adding or modifying a static or dynamic MAC address entry on an interface
- MAC-based VLAN assignment, Static MAC-based VLAN assignment, Configuring static MAC-based VLAN assignment
- static MAC address entry
- static source check disable, Disabling static source check
- statistics
- interface statistics polling interval (Ethernet), Setting the statistics polling interval
- storm
- interface storm control (Layer 2 Ethernet), Configuring storm control on an Ethernet interface
- interface storm suppression (Ethernet), Configuring storm suppression
- STP
- algorithm calculation, Calculation process of the STP algorithm
- basic concepts, Basic concepts in STP
- BPDU forwarding, The configuration BPDU forwarding mechanism of STP
- configuration, STP configuration task list
- designated bridge, Designated bridge and designated port
- designated port, Designated bridge and designated port
- Digest Snooping configuration restrictions, Configuration restrictions and guidelines
- edge port configuration restrictions, Configuration restrictions and guidelines
- feature enable, Enabling the spanning tree feature in STP/RSTP/MSTP mode
- loop detection, STP
- mCheck configuration restrictions, Configuration restrictions and guidelines
- mode set, Setting the spanning tree mode
- MSTP device implementation, MSTP implementation on devices
- path cost, Path cost
- port link type configuration restrictions, Configuration restrictions and guidelines
- protocol packets, STP protocol packets
- root bridge, Root bridge
- root port, Root port
- TC Snooping configuration restrictions, Configuration restrictions and guidelines
- timer configuration restrictions, Configuration restrictions and guidelines
- timers, STP timers
- subinterface. See
- subnet
- link aggregation management subnet, Specifying a link aggregation management subnet
- subnetting
- IP subnet-based VLAN configuration, Configuring IP subnet-based VLANs, IP subnet-based VLAN configuration example
- sub-VLAN
- creation, Creating a sub-VLAN
- super VLAN
- configuration, Configuring super VLANs, Configuring a super VLAN, Super VLAN configuration example
- display, Displaying and maintaining super VLANs
- interface configuration, Configuring a super VLAN interface
- sub-VLAN creation, Creating a sub-VLAN
- suppressing
- interface physical state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- interface storm control configuration (Layer 2 Ethernet), Configuring storm control on an Ethernet interface
- interface storm suppression (Ethernet), Configuring storm suppression
- SVLAN
- QinQ basic configuration, Basic QinQ configuration example
- QinQ configuration, Configuring QinQ, QinQ configuration examples
- QinQ SVLAN tag 802.1p priority, Setting the 802.1p priority in SVLAN tags
- QinQ VLAN transparent transmission configuration, VLAN transparent transmission configuration example
- VLAN mapping configuration, Configuring VLAN mapping, VLAN mapping configuration task list, VLAN mapping configuration examples
- VLAN mapping implementation, VLAN mapping implementations
- switching
- interface configuration (Ethernet), Configuring Ethernet interfaces
- interface configuration (inloopback), Configuring loopback, null, and inloopback interfaces, Configuring an inloopback interface
- interface configuration (loopback), Configuring loopback, null, and inloopback interfaces, Configuring a loopback interface
- interface configuration (null), Configuring loopback, null, and inloopback interfaces, Configuring a null interface
- spanning tree switched network diameter, Configuring the network diameter of a switched network
- synchronizing
- MAC addresses, Enabling MAC address synchronization
- syslog
- MAC Information configuration, Configuring MAC Information, MAC Information configuration example
- MAC Information mode configuration, Configuring the MAC Information mode
- system
- interface bulk configuration, Bulk configuring interfaces
T
- table
- LAN switching LLDP priority mapping table, Configuring the 802.1p-to-local priority mapping
- MAC address, Configuring the MAC address table, MAC address table configuration task list , MAC address table configuration example
- MSTP VLAN-to-instance mapping table, VLAN-to-instance mapping table
- tag
- QinQ CVLAN, How QinQ works
- QinQ CVLAN tag TPID value, Configuring the CVLAN TPID
- QinQ SVLAN, How QinQ works
- QinQ SVLAN tag 802.1p priority, Setting the 802.1p priority in SVLAN tags
- QinQ SVLAN tag TPID value, Configuring the SVLAN TPID
- QinQ VLAN tag TPID value, Configuring the TPID in VLAN tags
- VLAN mapping configuration, Configuring VLAN mapping, VLAN mapping configuration task list, VLAN mapping configuration examples
- VLAN mapping configuration (1:1), Configuring one-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- VLAN mapping configuration (1:2), Configuring one-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- VLAN mapping configuration (2:2), Configuring two-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- VLAN mapping configuration (M:1), Configuring many-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- VLAN mapping configuration (M:1) (dynamic IP address assignment), Configuring many-to-one VLAN mapping in a network with dynamic IP address assignment
- VLAN mapping configuration (M:1) (static IP address assignment), Configuring many-to-one VLAN mapping in a network with static IP address assignment
- TC Snooping (spanning tree), Configuring TC Snooping
- TC-BPDU
- spanning tree TC-BPDU guard, Enabling TC-BPDU guard
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- testing
- interface cable connection (Layer 2 Ethernet), Testing the cable connection of an Ethernet interface
- time
- Ethernet link aggregation LACP timeout interval, LACP
- timeout
- Ethernet link aggregation LACP long timeout interval, LACP timeout interval
- Ethernet link aggregation LACP short timeout interval, LACP timeout interval
- spanning tree timeout factor, Configuring the timeout factor
- timer
- LAN switching LLDP reinitialization delay, Setting the LLDP reinitialization delay
- MAC address table dynamic aging, Setting the aging timer for dynamic MAC address entries
- MRP Join, MRP timers
- MRP Leave, MRP timers
- MRP LeaveAll, MRP timers
- MRP Periodic, MRP timers
- MVRP set, Setting MRP timers
- spanning tree forward delay, Configuring spanning tree timers
- spanning tree hello, Configuring spanning tree timers
- spanning tree max age, Configuring spanning tree timers
- STP forward delay, STP timers
- STP hello, STP timers
- STP max age, STP timers
- TLV
- LAN switching LLDP advertisable TLV configuration, Configuring the advertisable TLVs
- LAN switching LLDP management address configuration, Configuring the management address and its encoding format
- LAN switching LLDP management address encoding format, Configuring the management address and its encoding format
- LAN switching LLDP parameters, Setting other LLDP parameters
- LAN switching LLDP+DCBX TLV advertisement, Enabling LLDP and DCBX TLV advertising
- LAN switching LLDPDU basic management types, TLVs
- LAN switching LLDPDU LLDP-MED types, TLVs
- LAN switching LLDPDU management address TLV, Management address
- LAN switching LLDPDU organization-specific types, TLVs
- topology
- STP TCN BPDU protocol packets, STP protocol packets
- traffic
- Ethernet link aggregation traffic redirection, Enabling link-aggregation traffic redirection
- PBB configuration, Configuring PBB, PBB configuration task list, PBB configuration example
- private VLAN configuration, Configuration procedure, Private VLAN configuration examples
- voice VLAN traffic QoS priority settings, Configuring the QoS priority settings for voice traffic
- transmitting
- LAN switching LLDP frames, Transmitting LLDP frames
- QinQ VLAN transparent transmission, Configuring transparent transmission for VLANs, VLAN transparent transmission configuration example
- spanning tree TC-BPDU transmission restriction, Configuring TC-BPDU transmission restriction
- transparent transmission (QinQ for VLAN), Configuring transparent transmission for VLANs, VLAN transparent transmission configuration example
- trapping
- LAN switching LLDP configuration, Configuring LLDP trapping and LLDP-MED trapping
- LAN switching LLDP-MED configuration, Configuring LLDP trapping and LLDP-MED trapping
- MAC address table SNMP notification, Enabling SNMP notifications for the MAC address table
- MAC Information configuration, Configuring MAC Information, MAC Information configuration example
- MAC Information mode configuration, Configuring the MAC Information mode
- troubleshooting
- PBB, Troubleshooting PBB
- PBB customer frame peer transmission, Failed to transmit customer frames to peer
- trunk port
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- private VLAN trunk promiscuous port configuration, Trunk promiscuous port configuration example
- private VLAN trunk promiscuous+secondary port configuration, Trunk promiscuous and trunk secondary port configuration example
V
- virtual
- Virtual Local Area Network. Use
- VLAN
- basic configuration, Configuring basic VLAN settings
- configuration, Configuring VLANs, VLAN configuration examples
- display, Displaying and maintaining VLANs
- frame encapsulation, VLAN frame encapsulation
- group configuration, Configuring a VLAN group
- interface basics configuration, Configuring basic settings of a VLAN interface
- IP subnet-based VLAN configuration, Configuring IP subnet-based VLANs, IP subnet-based VLAN configuration example
- LAN switching LLDP CDP compatibility, Configuring CDP compatibility
- LAN switching LLDP configuration (CDP-compatible), CDP-compatible LLDP configuration example
- Layer 2 Ethernet aggregate interface (ignored VLAN), Specifying ignored VLANs for a Layer 2 aggregate interface
- link aggregation management VLAN+management port, Specifying link aggregation management VLANs and management port
- loop detection configuration, Configuring loop detection, Loop detection configuration task list, Loop detection configuration example
- MAC address learning disable, Disabling MAC address learning on a VLAN
- MAC-based assignment (dynamic), Configuring dynamic MAC-based VLAN assignment
- MAC-based assignment (static), Configuring static MAC-based VLAN assignment
- MAC-based configuration, MAC-based VLAN configuration example
- MAC-based VLAN configuration, Configuring MAC-based VLANs
- MAC-based VLAN configuration (server-assigned), Configuring server-assigned MAC-based VLAN
- maintain, Displaying and maintaining VLANs
- mapping. See
- MRP implementation, MRP implementation
- MSTP VLAN-to-instance mapping table, VLAN-to-instance mapping table
- MVRP configuration, Configuring MVRP, MVRP configuration task list, MVRP configuration example
- MVRP GVRP compatibility, Enabling GVRP compatibility
- PBB data encapsulation, Configuring the data encapsulation type
- port isolation configuration, Configuring port isolation
- port link type, Port link type
- port-based configuration, Configuring port-based VLANs, Port-based VLAN configuration example
- port-based VLAN assignment (access port), Assigning an access port to a VLAN
- port-based VLAN assignment (hybrid port), Assigning a hybrid port to a VLAN
- port-based VLAN assignment (trunk port), Assigning a trunk port to a VLAN
- port-based VLAN frame handling, How ports of different link types handle frames
- private VLAN configuration, Configuring the private VLAN, Configuration procedure
- private VLAN configuration restrictions, Configuration restrictions and guidelines
- protocol-based VLAN configuration, Configuring protocol-based VLANs, Protocol-based VLAN configuration example
- protocols and standards, Protocols and standards
- PVID, PVID
- PVST, PVST
- QinQ basic configuration, Basic QinQ configuration example
- QinQ configuration, Configuring QinQ, QinQ configuration examples
- QinQ CVLAN tag, How QinQ works
- QinQ CVLAN tag TPID value, Configuring the CVLAN TPID
- QinQ implementation, QinQ implementations
- QinQ SVLAN tag, How QinQ works
- QinQ SVLAN tag 802.1p priority, Setting the 802.1p priority in SVLAN tags
- QinQ SVLAN tag TPID value, Configuring the SVLAN TPID
- QinQ transparent transmission, Configuring transparent transmission for VLANs
- QinQ VLAN tag TPID value, Configuring the TPID in VLAN tags
- QinQ VLAN transparent transmission configuration, VLAN transparent transmission configuration example
- super VLAN configuration, Configuring super VLANs, Configuring a super VLAN, Super VLAN configuration example
- super VLAN interface configuration, Configuring a super VLAN interface
- voice VLAN advertisement (LLDP/CDP), Configuring LLDP or CDP to advertise a voice VLAN
- voice VLAN assignment mode, Voice VLAN assignment modes
- voice VLAN assignment mode configuration (automatic), Automatic voice VLAN assignment mode configuration example
- voice VLAN assignment mode configuration (manual), Manual voice VLAN assignment mode configuration example
- voice VLAN configuration, Configuring voice VLANs, Voice VLAN configuration examples
- voice VLAN host+IP phone connection (in series), Connecting the host and the IP phone in series
- voice VLAN IP phone access method, IP phone access methods
- voice VLAN IP phone+device connection, Connecting the IP phone to the device
- voice VLAN LLDP automatic IP phone discovery enable, Enabling LLDP for automatic IP phone discovery
- voice VLAN port operation configuration (automatic assignment), Configuring a port to operate in automatic voice VLAN assignment mode
- voice VLAN port operation configuration (manual assignment), Configuring a port to operate in manual voice VLAN assignment mode
- voice VLAN port operation configuration restrictions (automatic assignment), Configuration restrictions and guidelines
- voice VLAN port operation configuration restrictions (manual assignment), Configuration restrictions and guidelines
- voice VLAN port operation mode, Security mode and normal mode of voice VLANs
- voice VLAN traffic QoS priority settings, Configuring the QoS priority settings for voice traffic
- VLAN mapping
- 1:1 application scenario, Application scenario of one-to-one and many-to-one VLAN mapping
- 1:1 configuration, Configuring one-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- 1:1 implementation, VLAN mapping implementations, One-to-one VLAN mapping
- 1:2 application scenario, Application scenario of one-to-two and two-to-two VLAN mapping
- 1:2 configuration, Configuring one-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- 1:2 implementation, VLAN mapping implementations, One-to-two VLAN mapping
- 2:2 application scenario, Application scenario of one-to-two and two-to-two VLAN mapping
- 2:2 configuration, Configuring two-to-two VLAN mapping, One-to-two and two-to-two VLAN mapping configuration example
- 2:2 implementation, VLAN mapping implementations, Two-to-two VLAN mapping
- ARP detection (M:1) (dynamic IP address assignment), Enabling ARP detection
- ARP snooping (M:1) (static IP address assignment), Enabling ARP snooping
- configuration, Configuring VLAN mapping, VLAN mapping configuration task list, VLAN mapping configuration examples
- DHCP snooping (M:1) (dynamic IP address assignment), Enabling DHCP snooping
- displaying, Displaying and maintaining VLAN mapping
- M:1 application scenario, Application scenario of one-to-one and many-to-one VLAN mapping
- M:1 configuration, Configuring many-to-one VLAN mapping, One-to-one and many-to-one VLAN mapping configuration example
- M:1 configuration (dynamic IP address assignment), Configuring many-to-one VLAN mapping in a network with dynamic IP address assignment
- M:1 configuration (static IP address assignment), Configuring many-to-one VLAN mapping in a network with static IP address assignment
- M:1 customer-side port (dynamic IP address assignment), Configuring the customer-side port
- M:1 customer-side port (static IP address assignment), Configuring the customer-side port
- M:1 implementation, VLAN mapping implementations, Many-to-one VLAN mapping
- M:1 network-side port (dynamic IP address assignment), Configuring the network-side port
- M:1 network-side port (static IP address assignment), Configuring the network-side port
- voice traffic
- LAN switching LLDP CDP compatibility, Configuring CDP compatibility
- LAN switching LLDP configuration (CDP-compatible), CDP-compatible LLDP configuration example
- voice VLAN
- advertisement configuration (LLDP/CDP), Configuring LLDP or CDP to advertise a voice VLAN
- assignment mode, Voice VLAN assignment modes
- assignment mode (automatic), Automatic mode
- assignment mode (manual), Manual mode
- assignment mode configuration (automatic), Automatic voice VLAN assignment mode configuration example
- assignment mode configuration (manual), Manual voice VLAN assignment mode configuration example
- assignment mode+IP phone cooperation, Cooperation of voice VLAN assignment modes and IP phones
- configuration, Configuring voice VLANs, Voice VLAN configuration examples
- display, Displaying and maintaining voice VLANs
- host+IP phone connection (in series), Connecting the host and the IP phone in series
- information advertisement to IP phone, Advertising the voice VLAN information to IP phones
- IP phone access method, IP phone access methods
- IP phone identification (LLDP), Automatically identifying IP phones through LLDP
- IP phone identification (OUI address), Identifying IP phones through OUI addresses
- IP phone identification method, Methods of identifying IP phones
- IP phone+device connection, Connecting the IP phone to the device
- LLDP automatic IP phone discovery enable, Enabling LLDP for automatic IP phone discovery
- LLDP automatic IP phone discovery enable restrictions, Configuration restrictions and guidelines
- port operation configuration (automatic assignment), Configuring a port to operate in automatic voice VLAN assignment mode
- port operation configuration (manual assignment), Configuring a port to operate in manual voice VLAN assignment mode
- port operation configuration restrictions (automatic assignment), Configuration restrictions and guidelines
- port operation configuration restrictions (manual assignment), Configuration restrictions and guidelines
- port operation mode, Security mode and normal mode of voice VLANs
- traffic QoS priority setting configuration, Configuring the QoS priority settings for voice traffic
- VoIP
- voice VLAN configuration, Configuring voice VLANs, Voice VLAN configuration examples
- voice VLAN information advertisement to IP phones, Advertising the voice VLAN information to IP phones
- voice VLAN IP phone access method, IP phone access methods
- voice VLAN IP phone identification (LLDP), Automatically identifying IP phones through LLDP
- voice VLAN IP phone identification (OUI address), Identifying IP phones through OUI addresses
- VPN
- PBB configuration, Configuring PBB, PBB configuration task list, PBB configuration example
- QinQ basic configuration, Basic QinQ configuration example
- QinQ configuration, Configuring QinQ, QinQ configuration examples
- QinQ VLAN transparent transmission configuration, VLAN transparent transmission configuration example
- VSI
- PBB B-VLAN configuration, Configuring a B-VLAN for a PBB VSI
- PBB creation, Creating a PBB VSI