Configuring an uplink port
On the BEB, you must specify uplink ports for a PBB VSI to forward frames from the customer network to the service provider network.
You can specify multiple uplink ports for one PBB VSI.
For the uplink port configuration to take effect, perform the following tasks before uplink port assignment:
Assign a B-VLAN to the PBB VSI.
Make sure the port is in up state and is not a link aggregation group member.
Assign the port to the B-VLAN.
To configure an uplink port:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter Layer 2 Ethernet interface view or Layer 2 aggregate interface view. | interface interface-type interface-number | N/A |
3. Specify the port as the uplink port for the specified or all PBB VSIs. | pbb uplink { all | vsi vsi-name-list } | By default, a port is not configured as the uplink port of any PBB VSI. |