Disabling LLDP PVID inconsistency check
By default, when the system receives an LLDP packet, it compares the PVID value contained in the packet with the PVID configured on the receiving interface. If the two PVIDs do not match, a log message will be printed to notify the user.
You can disable PVID inconsistency check if different PVIDs are required on a link.
To disable LLDP PVID inconsistency check:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Disable LLDP PVID inconsistency check. | lldp ignore-pvid-inconsistency | By default, LLDP PVID inconsistency check is enabled. |