Restoring the default settings for an aggregate interface

You can return all configurations on an aggregate interface to default settings.

To restore the default settings for an aggregate interface:

Step	Command
1. Enter system view.	system-view
2. Enter aggregate interface view.	Enter Layer 2 aggregate interface view:interface bridge-aggregation interface-number Enter Layer 3 aggregate interface or subinterface view:interface route-aggregation { interface-number \| interface-number.subnumber }
3. Restore the default settings for the aggregate interface.	default

prev	up	next
Shutting down an aggregate interface	home	Specifying link aggregation management VLANs and management port