Configuring the description of an aggregate interface

You can configure the description of an aggregate interface for administration purposes, for example, describing the purpose of the interface.

To configure the description of an aggregate interface:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter aggregate interface view.

  • Enter Layer 2 aggregate interface view:interface bridge-aggregation interface-number

  • Enter Layer 3 aggregate interface or subinterface view:interface route-aggregation { interface-number | interface-number.subnumber }

N/A

3. Configure the description of the aggregate interface.

description text

By default, the description of an interface is interface-name Interface.