Specifying ignored VLANs for a Layer 2 aggregate interface
By default, to become Selected ports, the member ports must have the same VLAN permit state and VLAN tagging mode as the corresponding Layer 2 aggregate interface.
The system ignores the permit state and tagging mode of an ignored VLAN when choosing Selected ports.
To specify ignored VLANs for a Layer 2 aggregate interface:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter Layer 2 aggregate interface view. | interface bridge-aggregation interface-number | N/A |
3. Specify ignored VLANs. | link-aggregation ignore vlan vlan-id-list | By default, a Layer 2 aggregate interface does not ignore any VLANs. |