Disabling the device to reactivate the shutdown edge ports
A device enabled with BPDU guard shuts down edge ports that have received configuration BPDUs and notifies the NMS of the shutdown event. After a port status detection interval, the device reactivates the shutdown ports. This feature allows you to disable the device to reactivate the shutdown ports. The feature applies to edge ports that are shut down after you configure the stp port shutdown permanent command. To bring up these ports, use the undo shutdown command.
For more information about the port status detection interval, see device management configuration in Fundamentals Configuration Guide.
To disable the device to reactivate the shutdown edge ports:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Disable the device to reactivate the shutdown edge ports. | stp port shutdown permanent | By default, a device reactivates the shutdown edge ports after a port status detection interval. |