Digest Snooping configuration example
Network requirements
As shown in Figure 26, Device A and Device B connect to Device C, which is a third-party device. All these devices are in the same region.
Enable Digest Snooping on the ports of Device A and Device B that connect to Device C, so that the three devices can communicate with one another.
Figure 26: Network diagram
Configuration procedure
# Enable Digest Snooping on Ten-GigabitEthernet 1/0/1 of Device A and enable global Digest Snooping on Device A.
<DeviceA> system-view [DeviceA] interface ten-gigabitethernet 1/0/1 [DeviceA-Ten-GigabitEthernet1/0/1] stp config-digest-snooping [DeviceA-Ten-GigabitEthernet1/0/1] quit [DeviceA] stp global config-digest-snooping
# Enable Digest Snooping on Ten-GigabitEthernet 1/0/1 of Device B and enable global Digest Snooping on Device B.
<DeviceB> system-view [DeviceB] interface ten-gigabitethernet 1/0/1 [DeviceB-Ten-GigabitEthernet1/0/1] stp config-digest-snooping [DeviceB-Ten-GigabitEthernet1/0/1] quit [DeviceB] stp global config-digest-snooping