Ethernet link aggregation configuration task list

(Required.) Configuring an aggregation group:

• Configuring a static aggregation group

• Configuring a dynamic aggregation group

(Optional.) Configuring an aggregate interface:

• Configuring the description of an aggregate interface

• Setting the MAC address for a Layer 3 aggregate interface

• Specifying ignored VLANs for a Layer 2 aggregate interface

• Setting the MTU for a Layer 3 aggregate interface

• Setting the minimum and maximum numbers of Selected ports for an aggregation group

• Setting the expected bandwidth for an aggregate interface

• Configuring an edge aggregate interface

• Enabling BFD for an aggregation group

• Shutting down an aggregate interface

• Restoring the default settings for an aggregate interface

• Specifying link aggregation management VLANs and management port

(Optional.) Configuring load balancing for link aggregation group:

• Setting load sharing modes for link aggregation groups

• Configuring the ignored fields for the default load sharing mode

• Enabling local-first load sharing for link aggregation

• Configuring per-flow load sharing algorithm settings for Ethernet link aggregation

• Setting the global load sharing mode for MAC-in-MAC traffic

(Optional.) Enabling link-aggregation traffic redirection

(Optional.) Specifying a link aggregation management subnet