Configuring per-flow load sharing algorithm settings for Ethernet link aggregation
Configure the per-flow load sharing algorithm and algorithm seed to optimize traffic distribution on aggregate links based on existing per-flow load sharing settings. You can set only the algorithm or the algorithm seed, or both. You can combine an algorithm with different algorithm seeds to obtain different effects.
This feature does not take effect on per-flow load sharing that uses the following traffic classification criteria:
Source IP address.
Destination IP address.
Source MAC address.
Destination MAC address.
Source and destination IP addresses.
Source and destination MAC addresses.
To configure per-flow load sharing algorithm settings for Ethernet link aggregation:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Configure the load sharing algorithm. | link-aggregation global load-sharing algorithm algorithm-number | By default, algorithm 0 is used. If the device fails to load share traffic flows across all Selected ports, you can specify algorithm 1 to 8 in sequence until the problem is solved. |
3. Configure the load sharing algorithm seed. | link-aggregation global load-sharing seed seed-number | By default, algorithm seed 0 is used. |