Configuration procedure
To bulk configure interfaces:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface range view. |
| By using the interface range name command, you assign a name to an interface range and can specify this name rather than the interface range to enter the interface range view. |
3. (Optional.) Display commands available for the first interface in the interface range. | Enter a question mark (?) at the interface range prompt. | N/A |
4. Use available commands to configure the interfaces. | Available commands vary by interface. | N/A |
5. (Optional.) Verify the configuration. | display this | N/A |