Setting the interface connection distance
When two directly connected interfaces communicate, they use the buffer area to buffer the received data. A longer interface connection distance requires a greater buffer area.
Perform this task to modify the buffer area size by setting the interface connection distance.
To set the interface connection distance:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter Layer 2 Ethernet interface view. | interface interface-type interface-number | N/A |
3. Set the interface connection distance. | port connection-distance { 300 | 10000 | 20000 | 40000 } | By default, the interface connection distance is 10000 meters. |