Failed to transmit customer frames to peer
Symptom
Customer frames cannot be transmitted to the peer network by using PBB.
Solution
To resolve the problem:
Use the display l2vpn vsi verbose command to display the PBB configuration of the VSI.
If the VSI is not configured as a PBB VSI, configure the VSI as a PBB VSI.
If the VSI is down, use the undo shutdown command to bring the VSI up.
For more information about the display l2vpn vsi verbose command, see MPLS Command Reference.
Use the display l2vpn vsi verbose command to verify that the VSI's PBB settings are consistent across BEBs, especially the I-SID and B-VLAN settings.
Use the display vlan all command to verify that the following settings are configured on all BCBs:
The B-VLAN is created on each BCB.
All ports on the path between the BEBs are assigned to the B-VLAN.
If the problem persists, contact Hewlett Packard Enterprise Support.