Configuration procedure
You can enable Digest Snooping only on the HPE device that is connected to a third-party device that uses its private key to calculate the configuration digest.
To configure Digest Snooping:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter Layer 2 Ethernet or aggregate interface view. | interface interface-type interface-number | N/A |
3. Enable Digest Snooping on the interface. | stp config-digest-snooping | By default, Digest Snooping is disabled on ports. |
4. Return to system view. | quit | N/A |
5. Enable Digest Snooping globally. | stp global config-digest-snooping | By default, Digest Snooping is disabled globally. |