Specifying link aggregation management VLANs and management port
For an aggregation group to forward traffic of some VLANs through a specific port, specify the VLANs as management VLANs and the port as a management port.
Do not use the display link-aggregation load-sharing path command to identify the outgoing port for the traffic in a management VLAN. This command calculates the outgoing port for a traffic flow based on the algorithm for the specified load sharing mode. The outgoing port output from this command for management VLAN traffic might not be the management port (the actual outgoing port).
To specify link aggregation management VLANs and management port for an aggregation group:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Specify link aggregation management VLANs. | link-aggregation management-vlan vlan-id1 [ vlan-id2 ] | By default, no link aggregation management VLANs are specified. If you execute this command multiple times, the most recent configuration takes effect. |
3. Enter Layer 2 Ethernet interface view. | interface interface-type interface-number | N/A |
4. Configure the port as a management port for its aggregation group. | link-aggregation management-port | By default, a port does not act as a management port in its aggregation group. The management port must be a Selected port. |