Configuring basic VLAN settings

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. (Optional.) Create a VLAN and enter its view, or create a list of VLANs.	vlan { vlan-id1 [ to vlan-id2 ] \| all }	By default, only the system default VLAN (VLAN 1) exists.
3. Enter VLAN view.	vlan vlan-id	To configure a VLAN after you create a list of VLANs, you must perform this step.
4. Configure a name for the VLAN.	name text	By default, VLAN names are in the format VLAN vlan-id. For example, the name of VLAN 100 is VLAN 0100 by default.
5. Configure the description of the VLAN.	description text	The default setting is VLAN vlan-id, which is the ID of the VLAN. For example, the description of VLAN 100 is VLAN 0100 by default.

NOTE:

As the system default VLAN, VLAN 1 cannot be created or deleted.
Before you delete a dynamic VLAN, a VLAN configured with the QoS policy, or a VLAN locked by an application, you must first remove the configuration from the VLAN.

prev	up	next
Protocols and standards	home	Configuring basic settings of a VLAN interface