Displaying and maintaining Ethernet link aggregation
Execute display commands in any view and reset commands in user view.
Task | Command |
|---|---|
Display information for an aggregate interface or multiple aggregate interfaces. | display interface [ bridge-aggregation | route-aggregation ] [ brief [ down ] ] display interface [ { bridge-aggregation | route-aggregation } [ interface-number ] ] [ brief [ description ] ] |
Display the local system ID. | display lacp system-id |
Display the global or group-specific link-aggregation load sharing modes. | display link-aggregation load-sharing mode [ interface [ { bridge-aggregation | route-aggregation } interface-number ] ] |
Display forwarding information for the specified traffic flow. | display link-aggregation load-sharing path interface { bridge-aggregation | route-aggregation } interface-number ingress-port interface-type interface-number [ route ] { { destination-ip ip-address | destination-ipv6 ipv6-address } | { source-ip ip-address | source-ipv6 ipv6-address } | destination-mac mac-address | destination-port port-id | ethernet-type type-number | ip-protocol protocol-id | source-mac mac-address | source-port port-id | vlan vlan-id }* |
Display detailed link aggregation information for link aggregation member ports. | display link-aggregation member-port [ interface-list ] |
Display summary information about all aggregation groups. | display link-aggregation summary |
Display detailed information about the specified aggregation groups. | display link-aggregation verbose [ { bridge-aggregation | route-aggregation } [ interface-number ] ] |
Clear LACP statistics for the specified link aggregation member ports. | reset lacp statistics [ interface interface-list ] |
Clear statistics for the specified aggregate interfaces. | reset counters interface [ { bridge-aggregation | route-aggregation } [ interface-number ] ] |