Configuring a B-VLAN for a PBB VSI
You can assign only one B-VLAN to a PBB VSI, but different PBB VSIs can use the same B-VLAN.
For a PBB VSI, you must specify the same I-SID and B-VLAN across all BEBs.
To configure a B-VLAN for a PBB VSI:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter VSI view. | vsi vsi-name | N/A |
3. Configure the VSI as a PBB VSI, specify a PBB I-SID for the PBB VSI, and enter PBB VSI view. | pbb i-sid i-sid | N/A |
4. Specify a B-VLAN for the PBB VSI. | bvlan vlan-id | By default, no B-VLAN is specified for a PBB VSI. |