A
- ABR
- OSPF discard route configuration, Configuring discard routes for summary networks
- OSPF route summarization (ABR), Configuring route summarization on an ABR
- OSPF router type, Router types
- OSPFv3 route summarization (ABR), Configuring route summarization on an ABR
- ACL
- routing policy, ACL
- action
- PBR node, Configuring actions for a node
- address
- IP routing MP-BGP address family, Address family
- IS-IS area, Area address
- IS-IS format, IS-IS address format
- IS-IS NSAP format, NSAP
- IS-IS PPP interface hello packet source address check, Enabling source address check for hello packets on a PPP interface
- IS-IS routing method, Routing method
- adjacency
- OSPF BDR, DR and BDR
- OSPF DR, DR and BDR
- OSPFv3 BFD configuration, BFD for OSPFv3 configuration example
- OSPFv3 configuration, Configuring OSPFv3, OSPFv3 configuration task list, OSPFv3 configuration examples
- OSPFv3 DR election configuration, OSPFv3 DR election configuration example
- OSPFv3 GR configuration, OSPFv3 GR configuration example
- OSPFv3 IPsec profile configuration, OSPFv3 IPsec profile configuration example
- OSPFv3 NSSA area configuration, OSPFv3 NSSA area configuration example
- OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- OSPFv3 stub area configuration, OSPFv3 stub area configuration example
- advertising
- IP routing BGP COMMUNITY NO_ADVERTISE path attribute, BGP path attributes
- IP routing BGP configuration, Configuring BGP, BGP configuration task list
- IP routing BGP default route to peer/peer group, Advertising a default route to a peer or peer group
- IP routing BGP optimal route, Advertising optimal routes in the IP routing table
- IP routing BGP optimal route advertisement, Advertising optimal routes in the IP routing table
- IP routing BGP route advertisement rules, BGP route advertisement rules
- IP routing BGP route generation, Generating BGP routes
- IP routing RIP summary route advertisement, RIP summary route advertisement configuration example
- IPv4 BGP basics, Basic BGP configuration example
- IPv4 BGP BFD, BFD for BGP configuration example
- IPv4 BGP COMMUNITY, Configuring BGP community, BGP community configuration example
- IPv4 BGP confederation, BGP confederation configuration example
- IPv4 BGP configuration, IPv4 BGP configuration examples
- IPv4 BGP fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- IPv4 BGP GR, BGP GR configuration example
- IPv4 BGP load balancing, BGP load balancing configuration example
- IPv4 BGP path selection, BGP path selection configuration example
- IPv4 BGP route reflector, BGP route reflector configuration example
- IPv4 BGP route summarization, BGP route summarization configuration example
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IPv6 BGP basics, IPv6 BGP basic configuration example
- IPv6 BGP BFD, BFD for IPv6 BGP configuration example
- IPv6 BGP COMMUNITY, Configuring BGP community
- IPv6 BGP configuration, IPv6 BGP configuration examples
- IPv6 BGP fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- IPv6 BGP route reflector, IPv6 BGP route reflector configuration example
- IS-IS default route, Advertising a default route
- OSPF basics configuration, Basic OSPF configuration example
- OSPF configuration, Configuring OSPF, OSPF configuration task list, OSPF configuration examples
- OSPF host route advertisement, Advertising a host route
- OSPF route summarization configuration, OSPF route summarization configuration example
- RIP default route, Advertising a default route
- RIP on interface, Controlling RIP reception and advertisement on interfaces
- RIPng default route, Advertising a default route
- RIPv2 summary route, Advertising a summary route
- applying
- IPv6 PBR apply clause, apply clause
- OSPFv3 IPsec profile, Applying an IPsec profile
- PBR apply clause, Policy
- RIPng IPsec profile, Applying an IPsec profile
- routing policy apply clause, Routing policy, Configuring apply clauses
- area
- IS-IS, IS-IS area
- IS-IS area address, Area address
- IS-IS authentication (area), Configuring area authentication
- OSPF area, Configuring OSPF areas
- OSPF area configuration (NSSA), Configuring an NSSA area, OSPF NSSA area configuration example)
- OSPF area configuration (stub), Configuring a stub area, OSPF stub area configuration example
- OSPF areas, OSPF areas
- OSPF authentication (area), Configuring OSPF area authentication
- OSPF backbone, Backbone area and virtual links
- OSPF network type, Configuring OSPF network types
- OSPF NSSA area, NSSA area and totally NSSA area
- OSPF stub area, Stub area and totally stub area
- OSPF totally NSSA area, NSSA area and totally NSSA area
- OSPF totally stub area, Stub area and totally stub area
- OSPF virtual link, Configuring a virtual link
- OSPFv3 area parameter, Configuring OSPFv3 area parameters
- OSPFv3 NSSA area, Configuring an NSSA area
- OSPFv3 NSSA area configuration, OSPFv3 NSSA area configuration example
- OSPFv3 stub area, Configuring a stub area
- OSPFv3 stub area configuration, OSPFv3 stub area configuration example
- OSPFv3 virtual link, Configuring an OSPFv3 virtual link
- AS
- IP routing BGP confederation, Configuring a BGP confederation
- IP routing BGP confederation compatibility, Configuring confederation compatibility
- IP routing BGP configuration, Configuring BGP, BGP configuration task list
- IP routing BGP first AS number of EBGP route updates, Ignoring the first AS number of EBGP route updates
- IP routing BGP MED attribute, Configuring the MED attribute
- IP routing BGP path AS_PATH attribute, BGP path attributes
- IP routing BGP path AS_SEQUENCE attribute, BGP path attributes
- IP routing BGP path AS_SET attribute, BGP path attributes
- IP routing IS-IS configuration, IS-IS configuration examples
- IPv4 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- IPv4 BGP AS number substitution, Configuring AS number substitution
- IPv4 BGP basics, Basic BGP configuration example
- IPv4 BGP BFD, BFD for BGP configuration example
- IPv4 BGP COMMUNITY, BGP community configuration example
- IPv4 BGP confederation, BGP confederation configuration example
- IPv4 BGP configuration, IPv4 BGP configuration examples
- IPv4 BGP fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- IPv4 BGP FRR, BGP FRR configuration example
- IPv4 BGP GR, BGP GR configuration example
- IPv4 BGP load balancing, BGP load balancing configuration example
- IPv4 BGP local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- IPv4 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers, Enabling MED comparison for routes from confederation peers
- IPv4 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs, Enabling MED comparison for routes from different ASs
- IPv4 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis, Enabling MED comparison for routes on a per-AS basis
- IPv4 BGP MED default value, Configuring the default MED value
- IPv4 BGP path selection, BGP path selection configuration example
- IPv4 BGP private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
- IPv4 BGP route reflector, BGP route reflector configuration example
- IPv4 BGP route summarization, BGP route summarization configuration example
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IPv6 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- IPv6 BGP AS number substitution, Configuring AS number substitution
- IPv6 BGP basics, IPv6 BGP basic configuration example
- IPv6 BGP BFD, BFD for IPv6 BGP configuration example
- IPv6 BGP configuration, IPv6 BGP configuration examples
- IPv6 BGP fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- IPv6 BGP FRR, IPv6 BGP FRR configuration example
- IPv6 BGP local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- IPv6 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers, Enabling MED comparison for routes from confederation peers
- IPv6 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs, Enabling MED comparison for routes from different ASs
- IPv6 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis, Enabling MED comparison for routes on a per-AS basis
- IPv6 BGP MED default value, Configuring the default MED value
- IPv6 BGP private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
- IPv6 BGP route reflector, IPv6 BGP route reflector configuration example
- IS-IS basic configuration, Configuring basic IS-IS
- IS-IS basics configuration, Basic IS-IS configuration example
- IS-IS configuration, Configuring IS-IS, IS-IS configuration task list
- IS-IS DIS election configuration, DIS election configuration example
- OSPF areas, OSPF areas
- OSPF AS External LSA, LSA types
- routing policy AS_PATH list, AS path list, Configuring an AS path list
- AS_PATH
- IP routing BGP attribute, Configuring the AS_PATH attribute
- IPv4 BGP optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- IPv6 BGP optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- ASBR
- OSPF ASBR summary LSA, LSA types
- OSPF discard route configuration, Configuring discard routes for summary networks
- OSPF route summarization (ASBR), Configuring route summarization on an ASBR
- OSPF router type, Router types
- OSPFv3 redistributed route summarization (ASBR), Configuring route summarization on an ASBR
- assigning
- IPv6 IS-IS route convergence priority, Assigning a convergence priority to IPv6 IS-IS routes
- attribute
- IP routing BGP AS_PATH attribute, Configuring the AS_PATH attribute
- IP routing BGP MED attribute, Configuring the MED attribute
- IP routing BGP path AS_PATH, BGP path attributes
- IP routing BGP path COMMUNITY, BGP path attributes
- IP routing BGP path LOCAL_PREF, BGP path attributes
- IP routing BGP path MED, BGP path attributes
- IP routing BGP path NEXT_HOP, BGP path attributes
- IP routing BGP path ORIGIN, BGP path attributes
- IP routing MP-BGP MP_REACH_NLRI extended attribute, MP-BGP extended attributes
- IP routing MP-BGP MP_UNREACH_NLRI extended attribute, MP-BGP extended attributes
- IPv4 BGP AS number substitution, Configuring AS number substitution
- IPv4 BGP AS_PATH optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- IPv4 BGP COMMUNITY, Configuring BGP community, Configuring BGP community, BGP community configuration example
- IPv4 BGP fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- IPv4 BGP local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- IPv4 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv4 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv4 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv4 BGP MED default value, Configuring the default MED value
- IPv4 BGP NEXT_HOP, Configuring the NEXT_HOP attribute
- IPv4 BGP private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
- IPv6 BGP AS number substitution, Configuring AS number substitution
- IPv6 BGP AS_PATH optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- IPv6 BGP fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- IPv6 BGP local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- IPv6 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv6 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv6 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv6 BGP MED default value, Configuring the default MED value
- IPv6 BGP NEXT_HOP, Configuring the NEXT_HOP attribute
- IPv6 BGP private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
- authenticating
- IPv4 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- IPv6 BGP IPsec, Configuring IPsec for IPv6 BGP
- IPv6 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- IS-IS authentication, IS-IS authentication configuration example
- IS-IS authentication (area), Configuring area authentication
- IS-IS authentication (neighbor relationship), Configuring neighbor relationship authentication
- IS-IS authentication (routing domain), Configuring routing domain authentication
- IS-IS network security enhancement, Enhancing IS-IS network security
- OSPF configuration, Configuring OSPF authentication
- RIPng IPsec profile application, Applying an IPsec profile
- RIPv2 message authentication configuration, Configuring RIPv2 message authentication
- auto
- IP routing IS-IS FRR automatic backup next hop calculation, Configuring IS-IS FRR to automatically calculate a backup next hop
- IPv4 BGP route summarization (automatic), Configuring automatic route summarization
- IS-IS automatic cost calculation, Enabling automatic IS-IS cost calculation
- automatic
- RIPv2 automatic route summarization enable, Enabling RIPv2 automatic route summarization
B
- backbone
- OSPF backbone area, Backbone area and virtual links
- OSPF router type, Router types
- backing up
- IP routing route backup, Route backup
- bandwidth
- OSPF reference value, Configuring an OSPF cost for an interface
- BDR
- OSPF, DR and BDR
- OSPF election, DR and BDR election
- OSPF mechanism, DR and BDR mechanism
- BFD
- IP routing IS-IS FRR BFD, Configuring BFD for IS-IS FRR
- IP routing RIP BFD (bidirectional detection/control packet mode), BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- IP routing RIP BFD (single-hop echo detection), BFD for RIP configuration example (single-hop echo detection for a directly connected neighbor)
- IP routing RIP BFD (single-hop echo detection/specific destination), BFD for RIP configuration example (single hop echo detection for a specific destination)
- IPv4 BGP BFD configuration, Configuring BFD for BGP, BFD for BGP configuration example
- IPv6 BGP BFD configuration, Configuring BFD for BGP, BFD for IPv6 BGP configuration example
- IPv6 IS-IS BFD configuration, Configuring BFD for IPv6 IS-IS, BFD for IPv6 IS-IS configuration example
- IPv6 static route BFD configuration, Configuring BFD for IPv6 static routes
- IPv6 static route BFD control mode (direct next hop), Bidirectional control mode
- IPv6 static route BFD control mode (indirect next hop), Bidirectional control mode
- IPv6 static route BFD echo mode (single hop), Single-hop echo mode
- IPv6 static routing BFD (direct next hop), BFD for IPv6 static routes configuration example (direct next hop)
- IPv6 static routing BFD (indirect next hop), BFD for IPv6 static routes configuration example (indirect next hop)
- IS-IS BFD, Configuring BFD for IS-IS
- IS-IS BFD configuration, BFD for IS-IS configuration example
- OSPF configuration, Configuring BFD for OSPF, BFD for OSPF configuration example
- OSPF detection configuration (bidirectional control), Configuring bidirectional control detection
- OSPF detection configuration (single-hop echo), Configuring single-hop echo detection
- OSPF FRR configuration, Configuring BFD for OSPF FRR
- OSPF PIC BFD, Configuring BFD for OSPF PIC
- OSPFv3 BFD configuration, Configuring BFD for OSPFv3, BFD for OSPFv3 configuration example
- RIP BFD configuration, Configuring BFD for RIP
- RIP BFD configuration (bidirectional control detection), Configuring bidirectional control detection
- RIP BFD configuration (single-hop echo detection/neighbor), Configuring single-hop echo detection (for a directly connected RIP neighbor)
- RIP BFD configuration (single-hop echo detection/specific destination), Configuring single-hop echo detection (for a specific destination)
- RIP FRR BFD enable, Enabling BFD for RIP FRR
- static routing BFD bidirectional control mode (direct next hop), Bidirectional control mode
- static routing BFD bidirectional control mode (indirect next hop), Bidirectional control mode
- static routing BFD configuration, Configuring BFD for static routes
- static routing BFD single-hop echo mode, Single-hop echo mode
- BGP, Configuring BGP, See also
- 6PE configuration, Configuring 6PE
- 6PE optional capabilities, Configuring optional 6PE capabilities
- AS_PATH attribute configuration, Configuring the AS_PATH attribute
- basic configuration, Configuring basic BGP
- community, Settlements for problems in large-scale BGP networks
- confederation, Settlements for problems in large-scale BGP networks, Configuring a BGP confederation
- confederation compatibility, Configuring confederation compatibility
- configuration, Configuring BGP, BGP configuration task list
- configuration views, BGP configuration views
- default route advertisement to peer/peer group, Advertising a default route to a peer or peer group
- dynamic peer configuration, Configuring dynamic BGP peers
- dynamic peer configuration (IPv4 unicast address), Configuring dynamic BGP peers (IPv4 unicast address family)
- dynamic peer configuration (IPv6 unicast address), Configuring dynamic BGP peers (IPv6 unicast address family)
- enable, Enabling BGP
- first AS number of EBGP route updates, Ignoring the first AS number of EBGP route updates
- FRR configuration, Configuring BGP FRR
- GR configuration, Configuring BGP GR
- GR helper, Configuring BGP GR
- GR restarter, Configuring BGP GR
- GTSM configuration, Configuring GTSM for BGP
- IP routing EBGP direct connections after link failure, Enabling immediate re-establishment of direct EBGP connections upon link failure
- IPv4 EBGP peer protection (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- IPv6 EBGP peer protection (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- large scale network management, Settlements for problems in large-scale BGP networks
- large-scale network, Configuring a large-scale BGP network
- load balancing, BGP load balancing
- MED attribute configuration, Configuring the MED attribute
- message types, BGP message types
- MP-BGP, MP-BGP
- MP-BGP address family, Address family
- MP-BGP extended attributes, MP-BGP extended attributes
- network optimization, Tuning and optimizing BGP networks
- NSR configuration, Configuring BGP NSR
- optimal route advertisement, Advertising optimal routes in the IP routing table
- path attributes, BGP path attributes
- path selection control, Controlling BGP path selection
- peer, BGP speaker and BGP peer
- peer configuration, Configuring a BGP peer
- peer group, Settlements for problems in large-scale BGP networks, Configuring a BGP peer group
- protocols and standards, Protocols and standards
- route advertisement, BGP route advertisement rules
- route dampening, Settlements for problems in large-scale BGP networks
- route distribution control, Controlling route distribution and reception
- route filtering policies, Configuring BGP route filtering policies
- route flapping logging, Enabling logging for BGP route flapping
- route generation, Generating BGP routes
- route reception control, Controlling route distribution and reception
- route recursion, BGP load balancing
- route reflection, Configuring BGP route reflection
- route reflector, Settlements for problems in large-scale BGP networks
- route selection, BGP route selection, BGP load balancing
- route summarization, Settlements for problems in large-scale BGP networks, Configuring BGP route summarization
- routing policy AS_PATH list, AS path list
- routing policy COMMUNITY list, Community list
- session state change logging, Enabling logging of session state changes
- SNMP notification enable, Enabling SNMP notifications for BGP
- soft reset configuration, Configuring BGP soft-reset
- speaker, BGP speaker and BGP peer
- TCP connection source address, Specifying the source address of TCP connections
- troubleshooting, Troubleshooting BGP
- troubleshooting peer connection state, Symptom
- tuning network, Tuning and optimizing BGP networks
- update sending delay, Configuring BGP update sending delay
- bidirectional
- forwarding detection. Use
- IP routing RIP BFD (bidirectional detection/control packet mode), BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- IPv6 static route BFD control mode (direct next hop), Bidirectional control mode
- IPv6 static route BFD control mode (indirect next hop), Bidirectional control mode
- IPv6 static route BFD echo mode (single hop), Single-hop echo mode
- OSPF BFD detection configuration (bidirectional control), Configuring bidirectional control detection
- RIP BFD configuration (bidirectional control detection), Configuring bidirectional control detection
- static routing BFD bidirectional control mode (direct next hop), Bidirectional control mode
- static routing BFD bidirectional control mode (indirect next hop), Bidirectional control mode
- Border Gateway Protocol. Use
- broadcast
- IS-IS network type, IS-IS network types
- OSPF interface network type, Configuring the broadcast network type for an interface
- OSPF network type, OSPF network types, Configuring OSPF network types
- OSPFv3 network type, Configuring OSPFv3 network types
- OSPFv3 network type (interface), Configuring the OSPFv3 network type for an interface
C
- calculating
- IS-IS SPF calculation interval, Controlling SPF calculation interval
- OSPF FRR backup next hop calculation (LFA algorithm), Configuring OSPF FRR to calculate a backup next hop using the LFA algorithm
- OSPF interface cost, Configuring an OSPF cost for an interface
- OSPF route calculation, Route calculation
- OSPF SPF calculation interval, Specifying SPF calculation interval
- OSPFv3 SPF calculation interval, Specifying SPF calculation interval
- checking
- OSPFv3 DD packet ignore MTU check, Ignoring MTU check for DD packets
- classless inter-domain routing. Use CIDR
- CLNP
- IS-IS configuration, IS-IS configuration task list
- CLV IS-IS PDU, CLV
- community
- IPv4 BGP COMMUNITY, Configuring BGP community
- IPv4 BGP ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- COMMUNITY
- routing policy COMMUNITY list, Configuring a community list
- community
- IP routing BGP, Settlements for problems in large-scale BGP networks
- IP routing BGP COMMUNITY path attribute, BGP path attributes
- IPv4 BGP COMMUNITY, BGP community configuration example
- IPv4 BGP route reflector, Configuring a BGP route reflector
- IPv6 BGP COMMUNITY, Configuring BGP community
- IPv6 BGP ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- IPv6 BGP route reflector, Configuring a BGP route reflector
- routing policy extended community list, Extended community list, Configuring an extended community list
- routing policy list, Community list
- comparing
- IPv4 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv4 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv4 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv6 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv6 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv6 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- confederating
- IP routing BGP confederation, Settlements for problems in large-scale BGP networks, Configuring a BGP confederation
- IP routing BGP confederation compatibility, Configuring confederation compatibility
- IPv4 BGP confederation, BGP confederation configuration example
- IPv4 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv6 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- configuring
- BGP dynamic peer, Configuring dynamic BGP peers
- BGP dynamic peer (IPv4 unicast address), Configuring dynamic BGP peers (IPv4 unicast address family)
- BGP dynamic peer (IPv6 unicast address), Configuring dynamic BGP peers (IPv6 unicast address family)
- BGP update sending delay, Configuring BGP update sending delay
- IP routing, Configuring basic IP routing
- IP routing BGP, Configuring BGP, BGP configuration task list
- IP routing BGP 6PE, Configuring 6PE
- IP routing BGP 6PE basics, Configuring basic 6PE
- IP routing BGP 6PE optional capabilities, Configuring optional 6PE capabilities
- IP routing BGP AS_PATH attribute, Configuring the AS_PATH attribute
- IP routing BGP basics, Configuring basic BGP
- IP routing BGP confederation, Configuring a BGP confederation
- IP routing BGP confederation compatibility, Configuring confederation compatibility
- IP routing BGP FRR, Configuring BGP FRR
- IP routing BGP GR, Configuring BGP GR
- IP routing BGP GR helper, Configuring BGP GR
- IP routing BGP GR restarter, Configuring BGP GR
- IP routing BGP GTSM, Configuring GTSM for BGP
- IP routing BGP large-scale network, Configuring a large-scale BGP network
- IP routing BGP MED attribute, Configuring the MED attribute
- IP routing BGP NSR, Configuring BGP NSR
- IP routing BGP peer, Configuring a BGP peer
- IP routing BGP peer group, Configuring a BGP peer group
- IP routing BGP route filtering policies, Configuring BGP route filtering policies
- IP routing BGP route redistribution, Configuring BGP route summarization
- IP routing BGP route reflection, Configuring BGP route reflection
- IP routing BGP soft reset, Configuring BGP soft-reset
- IP routing ECMP route max number, Configuring the maximum number of ECMP routes
- IP routing FIB route max lifetime, Configuring the maximum lifetime for routes in the FIB
- IP routing IS-IS, IS-IS configuration examples
- IP routing IS-IS circuit level, Configuring the IS level and circuit level
- IP routing IS-IS FRR automatic backup next hop calculation, Configuring IS-IS FRR to automatically calculate a backup next hop
- IP routing IS-IS FRR BFD, Configuring BFD for IS-IS FRR
- IP routing IS-IS IS level, Configuring the IS level and circuit level
- IP routing RIB label max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IP routing RIB route max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IP routing RIP, RIP configuration examples
- IP routing RIP basics, Basic RIP configuration example
- IP routing RIP BFD (bidirectional detection/control packet mode), BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- IP routing RIP BFD (single-hop echo detection), BFD for RIP configuration example (single-hop echo detection for a directly connected neighbor)
- IP routing RIP BFD (single-hop echo detection/specific destination), BFD for RIP configuration example (single hop echo detection for a specific destination)
- IP routing RIP FRR, RIP FRR configuration example
- IP routing RIP interface additional metric, RIP interface additional metric configuration example
- IP routing RIP route redistribution, RIP route redistribution configuration example
- IP routing RIP summary route advertisement, RIP summary route advertisement configuration example
- IP routing static route, Static route configuration examples
- IPv4 BGP, IPv4 BGP configuration examples
- IPv4 BGP AS number substitution, Configuring AS number substitution
- IPv4 BGP basics, Basic BGP configuration example
- IPv4 BGP BFD, Configuring BFD for BGP, BFD for BGP configuration example
- IPv4 BGP COMMUNITY, Configuring BGP community, BGP community configuration example
- IPv4 BGP confederation, BGP confederation configuration example
- IPv4 BGP default local preference, Configuring the default local preference
- IPv4 BGP FRR, BGP FRR configuration example
- IPv4 BGP GR, BGP GR configuration example
- IPv4 BGP holdtime, Configuring the keepalive interval and hold time
- IPv4 BGP keepalive interval, Configuring the keepalive interval and hold time
- IPv4 BGP load balancing, Configuring BGP load balancing, BGP load balancing configuration example
- IPv4 BGP manual soft reset, Configuring manual soft-reset
- IPv4 BGP MED default value, Configuring the default MED value
- IPv4 BGP NEXT_HOP attribute, Configuring the NEXT_HOP attribute
- IPv4 BGP path selection, BGP path selection configuration example
- IPv4 BGP route dampening, Configuring BGP route dampening
- IPv4 BGP route distribution filtering policies, Configuring BGP route distribution filtering policies
- IPv4 BGP route preference, Configuring preferences for BGP routes
- IPv4 BGP route reception filtering policies, Configuring BGP route reception filtering policies
- IPv4 BGP route reflector, Configuring a BGP route reflector, BGP route reflector configuration example
- IPv4 BGP route summarization, BGP route summarization configuration example
- IPv4 BGP route summarization (automatic ), Configuring automatic route summarization
- IPv4 BGP route summarization (manual), Configuring manual route summarization
- IPv4 BGP route update interval, Configuring the interval for sending updates for the same route
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IPv4 EBGP peer group, Configuring an EBGP peer group
- IPv4 IBGP peer group, Configuring an IBGP peer group
- IPv6 BGP, IPv6 BGP configuration examples
- IPv6 BGP 6PE, 6PE configuration example
- IPv6 BGP AS number substitution, Configuring AS number substitution
- IPv6 BGP basics, IPv6 BGP basic configuration example
- IPv6 BGP BFD, Configuring BFD for BGP, BFD for IPv6 BGP configuration example
- IPv6 BGP COMMUNITY, Configuring BGP community
- IPv6 BGP default local preference, Configuring the default local preference
- IPv6 BGP FRR, IPv6 BGP FRR configuration example
- IPv6 BGP holdtime, Configuring the keepalive interval and hold time
- IPv6 BGP IPsec, Configuring IPsec for IPv6 BGP
- IPv6 BGP keepalive interval, Configuring the keepalive interval and hold time
- IPv6 BGP load balancing, Configuring BGP load balancing
- IPv6 BGP manual soft reset, Configuring manual soft-reset
- IPv6 BGP MED default value, Configuring the default MED value
- IPv6 BGP NEXT_HOP attribute, Configuring the NEXT_HOP attribute
- IPv6 BGP packet IPsec, IPsec for IPv6 BGP packets configuration example
- IPv6 BGP route dampening, Configuring BGP route dampening
- IPv6 BGP route distribution filtering policies, Configuring BGP route distribution filtering policies
- IPv6 BGP route preference, Configuring preferences for BGP routes
- IPv6 BGP route reception filtering policies, Configuring BGP route reception filtering policies
- IPv6 BGP route reflector, Configuring a BGP route reflector, IPv6 BGP route reflector configuration example
- IPv6 BGP route update interval, Configuring the interval for sending updates for the same route
- IPv6 default route, Configuring an IPv6 default route
- IPv6 EBGP peer group, Configuring an EBGP peer group
- IPv6 IBGP peer group, Configuring an IBGP peer group
- IPv6 IS-IS, Configuring IPv6 IS-IS, IPv6 IS-IS configuration examples
- IPv6 IS-IS basics, Configuring basic IPv6 IS-IS, IPv6 IS-IS basic configuration example
- IPv6 IS-IS BFD, Configuring BFD for IPv6 IS-IS, BFD for IPv6 IS-IS configuration example
- IPv6 IS-IS route control, Configuring IPv6 IS-IS route control
- IPv6 PBR, Configuring IPv6 PBR, IPv6 PBR configuration task list, Configuring IPv6 PBR, IPv6 PBR configuration examples
- IPv6 PBR interface, Configuring IPv6 interface PBR
- IPv6 PBR interface (packet type-based), Packet type-based IPv6 interface PBR configuration example
- IPv6 PBR local, Configuring IPv6 local PBR
- IPv6 PBR local (packet type-based), Packet type-based IPv6 local PBR configuration example
- IPv6 PBR node action, Configuring actions for an IPv6 node
- IPv6 PBR node match criteria, Configuring match criteria for an IPv6 node
- IPv6 PBR policy, Configuring an IPv6 policy
- IPv6 static route, Configuring an IPv6 static route
- IPv6 static route BFD, Configuring BFD for IPv6 static routes
- IPv6 static route BFD control mode (direct next hop), Bidirectional control mode
- IPv6 static route BFD control mode (indirect next hop), Bidirectional control mode
- IPv6 static route BFD echo mode (single hop), Single-hop echo mode
- IPv6 static routing, Configuring IPv6 static routing, IPv6 static routing configuration examples
- IPv6 static routing basics, Basic IPv6 static route configuration example
- IPv6 static routing BFD (direct next hop), BFD for IPv6 static routes configuration example (direct next hop)
- IPv6 static routing BFD (indirect next hop), BFD for IPv6 static routes configuration example (indirect next hop)
- IS-IS, Configuring IS-IS, IS-IS configuration task list
- IS-IS authentication, IS-IS authentication configuration example
- IS-IS authentication (area), Configuring area authentication
- IS-IS authentication (neighbor relationship), Configuring neighbor relationship authentication
- IS-IS authentication (routing domain), Configuring routing domain authentication
- IS-IS basics, Configuring basic IS-IS, Basic IS-IS configuration example
- IS-IS BFD, Configuring BFD for IS-IS, BFD for IS-IS configuration example
- IS-IS DIS election, DIS election configuration example
- IS-IS ECMP routes max, Configuring the maximum number of ECMP routes
- IS-IS FRR, Configuring IS-IS FRR, IS-IS FRR configuration example
- IS-IS global cost, Configuring a global IS-IS cost
- IS-IS GR, Configuring IS-IS GR
- IS-IS GR configuration, IS-IS GR configuration example
- IS-IS interface cost, Configuring an IS-IS cost for an interface
- IS-IS interface DIS priority, Configuring a DIS priority for an interface
- IS-IS interface P2P network type, Configuring P2P network type for an interface
- IS-IS link cost, Configuring IS-IS link cost
- IS-IS LSP parameters, Configuring LSP parameters
- IS-IS LSP timer, Configuring LSP timers
- IS-IS LSP-calculated route filtering, Filtering routes calculated from received LSPs
- IS-IS network management, Configuring IS-IS network management
- IS-IS NSR, Configuring IS-IS NSR, IS-IS NSR configuration example
- IS-IS redistributed route filtering, Filtering redistributed routes
- IS-IS route control, Configuring IS-IS route control
- IS-IS route convergence priority, Configuring convergence priorities for specific routes
- IS-IS route filtering, Configuring IS-IS route filtering
- IS-IS route leaking, Configuring IS-IS route leaking
- IS-IS route redistribution, Configuring IS-IS route redistribution, IS-IS route redistribution configuration example
- IS-IS route summarization, Configuring IS-IS route summarization
- IS-IS system ID > host name mapping, Configuring system ID to host name mappings
- IS-IS system ID > host name mapping (dynamic), Configuring dynamic system ID to host name mapping
- IS-IS system ID > host name mapping (static), Configuring a static system ID to host name mapping
- OSPF, Configuring OSPF, OSPF configuration task list, OSPF configuration examples
- OSPF area, Configuring OSPF areas
- OSPF area (NSSA), Configuring an NSSA area, OSPF NSSA area configuration example)
- OSPF area (stub), Configuring a stub area, OSPF stub area configuration example
- OSPF authentication (area), Configuring OSPF area authentication
- OSPF authentication (interface), Configuring OSPF interface authentication
- OSPF basics, Basic OSPF configuration example
- OSPF BFD, Configuring BFD for OSPF, BFD for OSPF configuration example
- OSPF BFD detection (bidirectional control), Configuring bidirectional control detection
- OSPF BFD detection (single-hop echo), Configuring single-hop echo detection
- OSPF DD packet interface MTU, Adding the interface MTU into DD packets
- OSPF discard route, Configuring discard routes for summary networks
- OSPF DR election, OSPF DR election configuration example
- OSPF ECMP route max, Configuring the maximum number of ECMP routes
- OSPF exit overflow interval, Configuring OSPF exit overflow interval
- OSPF FRR, Configuring OSPF FRR, OSPF FRR configuration example
- OSPF FRR backup next hop (routing policy), Configuring OSPF FRR to specify a backup next hop using a routing policy
- OSPF FRR backup next hop calculation (LFA algorithm), Configuring OSPF FRR to calculate a backup next hop using the LFA algorithm
- OSPF FRR BFD, Configuring BFD for OSPF FRR
- OSPF GR, Configuring OSPF GR, OSPF GR configuration example
- OSPF GR helper, Configuring OSPF GR helper
- OSPF GR restarter, Configuring OSPF GR restarter
- OSPF host route advertisement, Advertising a host route
- OSPF interface cost, Configuring an OSPF cost for an interface
- OSPF interface network type (broadcast), Configuring the broadcast network type for an interface
- OSPF interface network type (NBMA), Configuring the NBMA network type for an interface
- OSPF interface network type (P2MP), Configuring the P2MP network type for an interface
- OSPF interface network type (P2P), Configuring the P2P network type for an interface
- OSPF log count, Configuring the number of OSPF logs
- OSPF LSDB external LSAs max number, Configuring the maximum number of external LSAs in LSDB
- OSPF LSU transmit rate, Configuring the LSU transmit rate
- OSPF network management, Configuring OSPF network management
- OSPF network type, Configuring OSPF network types
- OSPF NSR, Configuring OSPF NSR, OSPF NSR configuration example
- OSPF packet DSCP value, Configuring a DSCP value for OSPF packets
- OSPF PIC, Configuring OSPF PIC
- OSPF PIC BFD, Configuring BFD for OSPF PIC
- OSPF preference, Configuring OSPF preference
- OSPF prefix prioritization, Configuring prefix prioritization
- OSPF prefix suppression, Configuring prefix suppression
- OSPF prefix suppression (interface), Configuring prefix suppression for an interface
- OSPF prefix suppression (OSPF process), Configuring prefix suppression for an OSPF process
- OSPF received route filtering, Configuring received OSPF route filtering
- OSPF redistributed route default parameters, Configuring default parameters for redistributed routes
- OSPF route control, Configuring OSPF route control
- OSPF route redistribution, OSPF route redistribution configuration example
- OSPF route redistribution (another routing protocol), Redistributing routes from another routing protocol
- OSPF route redistribution (default route), Redistributing a default route
- OSPF route summarization, Configuring OSPF route summarization, OSPF route summarization configuration example
- OSPF route summarization (ABR), Configuring route summarization on an ABR
- OSPF route summarization (ASBR), Configuring route summarization on an ASBR
- OSPF stub router, Configuring stub routers
- OSPF timer, Configuring OSPF timers
- OSPF Type-3 LSA filtering, Configuring Type-3 LSA filtering
- OSPF virtual link, Configuring a virtual link, OSPF virtual link configuration example
- OSPFv3, Configuring OSPFv3, OSPFv3 configuration task list, OSPFv3 configuration examples
- OSPFv3 area parameter, Configuring OSPFv3 area parameters
- OSPFv3 BFD, Configuring BFD for OSPFv3, BFD for OSPFv3 configuration example
- OSPFv3 DR election, OSPFv3 DR election configuration example
- OSPFv3 ECMP route max, Configuring the maximum number of OSPFv3 ECMP routes
- OSPFv3 GR, Configuring OSPFv3 GR
- OSPFv3 GR configuration, OSPFv3 GR configuration example
- OSPFv3 GR helper, Configuring GR helper
- OSPFv3 GR restarter, Configuring GR restarter
- OSPFv3 Inter-Area-Prefix LSA filtering, Configuring Inter-Area-Prefix LSA filtering
- OSPFv3 interface cost, Configuring an OSPFv3 cost for an interface
- OSPFv3 interface DR priority, Configuring a DR priority for an interface
- OSPFv3 IPsec profile configuration, OSPFv3 IPsec profile configuration example
- OSPFv3 LSU transmit rate, Configuring the LSU transmit rate
- OSPFv3 NBMA neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 network management, Configuring OSPFv3 network management
- OSPFv3 network type, Configuring OSPFv3 network types
- OSPFv3 network type (interface), Configuring the OSPFv3 network type for an interface
- OSPFv3 NSR, Configuring OSPFv3 NSR, OSPFv3 NSR configuration example
- OSPFv3 NSSA area, Configuring an NSSA area, OSPFv3 NSSA area configuration example
- OSPFv3 P2MP neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 preference, Configuring a preference for OSPFv3
- OSPFv3 prefix suppression, Configuring prefix suppression
- OSPFv3 prefix suppression (interface), Configuring prefix suppression for an interface
- OSPFv3 prefix suppression (OSPFv3 process), Configuring prefix suppression for an OSPFv3 process
- OSPFv3 received route filtering, Configuring OSPFv3 received route filtering
- OSPFv3 redistributed route summarization (ASBR), Configuring route summarization on an ASBR
- OSPFv3 redistributed route tag, Configuring tags for redistributed routes
- OSPFv3 route control, Configuring OSPFv3 route control
- OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- OSPFv3 route redistribution (another routing protocol), Redistributing routes from another routing protocol
- OSPFv3 route redistribution (default route), Redistributing a default route
- OSPFv3 route summarization, OSPFv3 route summarization configuration example
- OSPFv3 route summarization (ABR), Configuring route summarization on an ABR
- OSPFv3 stub area, Configuring a stub area, OSPFv3 stub area configuration example
- OSPFv3 stub router, Configuring stub routers
- OSPFv3 timer, Configuring OSPFv3 timers
- OSPFv3 virtual link, Configuring an OSPFv3 virtual link
- PBR, Configuring PBR, PBR configuration task list, Configuring PBR, PBR configuration examples
- PBR (interface), Configuring interface PBR
- PBR (interface/packet type-based), Packet type-based interface PBR configuration example
- PBR (local), Configuring local PBR
- PBR (local/packet type-based), Packet type-based local PBR configuration example
- PBR node action, Configuring actions for a node
- PBR node match criteria, Configuring match criteria for a node
- PBR policy, Configuring a policy
- RIP, Configuring RIP, RIP configuration task list
- RIP additional routing metric, Configuring an additional routing metric
- RIP basics, Configuring basic RIP
- RIP BFD, Configuring BFD for RIP
- RIP BFD (bidirectional control detection), Configuring bidirectional control detection
- RIP BFD (single-hop echo detection/neighbor), Configuring single-hop echo detection (for a directly connected RIP neighbor)
- RIP BFD (single-hop echo detection/specific destination), Configuring single-hop echo detection (for a specific destination)
- RIP ECMP route max number, Configuring the maximum number of ECMP routes
- RIP FRR, Configuring RIP FRR
- RIP GR, Configuring RIP GR
- RIP network management, Configuring RIP network management
- RIP packet send rate, Configuring the RIP packet sending rate
- RIP poison reverse, Enabling split horizon and poison reverse
- RIP preference, Configuring a preference for RIP
- RIP received/redistributed route filtering, Configuring received/redistributed route filtering
- RIP route control, Configuring RIP route control
- RIP route redistribution, Configuring RIP route redistribution
- RIP split horizon, Enabling split horizon and poison reverse
- RIP timers, Configuring RIP timers
- RIP version, Configuring a RIP version
- RIPng, Configuring RIPng, RIPng configuration task list, RIPng configuration examples
- RIPng basics, Configuring basic RIPng, Basic RIPng configuration example
- RIPng ECMP route max, Configuring the maximum number of ECMP routes
- RIPng GR, Configuring RIPng GR
- RIPng IPsec profile configuration, RIPng IPsec profile configuration example
- RIPng packet zero field check, Configuring zero field check on RIPng packets
- RIPng poison reverse, Configuring split horizon and poison reverse
- RIPng preference, Configuring a preference for RIPng
- RIPng received/redistributed route filtering, Configuring received/redistributed route filtering
- RIPng route control, Configuring RIPng route control
- RIPng route redistribution, Configuring RIPng route redistribution, RIPng route redistribution configuration example
- RIPng route summarization, Configuring RIPng route summarization
- RIPng routing metric, Configuring an additional routing metric
- RIPng split horizon, Configuring split horizon and poison reverse
- RIPng timer, Configuring RIPng timers
- RIPv2 message authentication, Configuring RIPv2 message authentication
- RIPv2 route summarization, Configuring RIPv2 route summarization
- routing policy, Configuring routing policies, Configuring a routing policy, Routing policy configuration examples
- routing policy (IPv4 route redistribution), Routing policy configuration example for IPv4 route redistribution
- routing policy (IPv6 route redistribution), Routing policy configuration example for IPv6 route redistribution
- routing policy apply clause, Configuring apply clauses
- routing policy AS_PATH list, Configuring an AS path list
- routing policy COMMUNITY list, Configuring a community list
- routing policy continue clause, Configuring the continue clause
- routing policy extended community list, Configuring an extended community list
- routing policy filter, Configuring filters
- routing policy if-match clause, Configuring if-match clauses
- routing policy IPv4 prefix list, Configuring an IPv4 prefix list
- routing policy IPv6 prefix list, Configuring an IPv6 prefix list
- static routing, Configuring static routing, Configuring a static route
- static routing basics, Basic static route configuration example
- static routing BFD, Configuring BFD for static routes
- static routing BFD (direct next hop), BFD for static routes configuration example (direct next hop)
- static routing BFD (indirect next hop), BFD for static routes configuration example (indirect next hop)
- static routing BFD bidirectional control mode (direct next hop), Bidirectional control mode
- static routing BFD bidirectional control mode (indirect next hop), Bidirectional control mode
- static routing BFD single-hop echo mode, Single-hop echo mode
- static routing default route, Configuring a default route
- static routing FRR, Configuring static route FRR, Static route FRR configuration example
- static routing FRR (auto backup next hop), Configuring static route FRR to automatically select a backup next hop
- static routing FRR BFD echo packet mode, Enabling BFD echo packet mode for static route FRR
- static routing FRRs(backup next hop), Configuring static route FRR by specifying a backup next hop
- connecting
- IP routing BGP TCP connection source address, Specifying the source address of TCP connections
- IP routing EBGP direct connections after link failure, Enabling immediate re-establishment of direct EBGP connections upon link failure
- continue clause (routing policy), Routing policy, Configuring the continue clause
- controlling
- IP routing BGP path selection, Controlling BGP path selection
- IP routing BGP route distribution, Controlling route distribution and reception
- IP routing BGP route reception, Controlling route distribution and reception
- IP routing RIP BFD configuration (bidirectional detection/control packet mode), BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- IPv6 IS-IS route control, Configuring IPv6 IS-IS route control
- IPv6 static route BFD control mode (direct next hop), Bidirectional control mode
- IPv6 static route BFD control mode (indirect next hop), Bidirectional control mode
- IS-IS route control, Configuring IS-IS route control
- IS-IS SPF calculation interval, Controlling SPF calculation interval
- OSPF route control, Configuring OSPF route control
- OSPFv3 route control, Configuring OSPFv3 route control
- RIP additional routing metric configuration, Configuring an additional routing metric
- RIP interface advertisement, Controlling RIP reception and advertisement on interfaces
- RIP interface reception, Controlling RIP reception and advertisement on interfaces, Controlling RIP reception and advertisement on interfaces
- RIP route control configuration, Configuring RIP route control
- RIPng route control, Configuring RIPng route control
- convergence priority (IPv6 IS-IS), Assigning a convergence priority to IPv6 IS-IS routes
- convergence priority (IS-IS), Configuring convergence priorities for specific routes
- cost
- IS-IS automatic cost calculation, Enabling automatic IS-IS cost calculation
- IS-IS global cost, Configuring a global IS-IS cost
- IS-IS interface cost, Configuring an IS-IS cost for an interface
- IS-IS link cost, Configuring IS-IS link cost
- OSPF interface cost, Configuring an OSPF cost for an interface
- OSPFv3 interface cost, Configuring an OSPFv3 cost for an interface
- creating
- IPv6 PBR node, Creating an IPv6 node
- PBR node, Creating a node
- routing policy, Creating a routing policy
- CSNP
- IS-IS CSNP packet send interval, Specifying the interval for sending IS-IS CSNP packets
D
- dampening
- IP routing BGP route dampening, Settlements for problems in large-scale BGP networks
- IPv4 BGP route dampening, Configuring BGP route dampening
- IPv6 BGP route dampening, Configuring BGP route dampening
- database
- OSPF DD packet, OSPF packets
- DD
- OSPFv3 DD packet ignore MTU check, Ignoring MTU check for DD packets
- OSPFv3 packet type, OSPFv3 packets
- dead packet timer (OSPF), Configuring OSPF timers
- default
- IP routing BGP default route advertisement to peer/peer group, Advertising a default route to a peer or peer group
- IPv4 BGP default local preference, Configuring the default local preference
- IPv4 BGP MED default value, Configuring the default MED value
- IPv6 BGP default local preference, Configuring the default local preference
- IPv6 BGP MED default value, Configuring the default MED value
- IPv6 default route configuration, Configuring an IPv6 default route
- IS-IS default route advertisement, Advertising a default route
- OSPF redistributed route default parameters, Configuring default parameters for redistributed routes
- OSPFv3 route redistribution (default route), Redistributing a default route
- RIP default route advertisement, Advertising a default route
- RIPng default route advertisement, Advertising a default route
- static routing configuration. See under static routing
- delaying
- OSPFv3 LSA transmission delay, Specifying LSA transmission delay
- detecting
- IP routing RIP BFD (bidirectional detection/control packet mode), BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- IP routing RIP BFD (single-hop echo detection), BFD for RIP configuration example (single-hop echo detection for a directly connected neighbor)
- IP routing RIP BFD (single-hop echo detection/specific destination), BFD for RIP configuration example (single hop echo detection for a specific destination)
- IPv4 BGP BFD, Configuring BFD for BGP
- IPv6 BGP BFD, Configuring BFD for BGP
- OSPF BFD configuration, Configuring BFD for OSPF
- OSPF BFD detection configuration (bidirectional control), Configuring bidirectional control detection
- OSPF BFD detection configuration (single-hop echo), Configuring single-hop echo detection
- OSPF FRR BFD, Configuring BFD for OSPF FRR
- RIP BFD configuration (bidirectional control detection), Configuring bidirectional control detection
- RIP BFD configuration (single-hop echo detection/neighbor), Configuring single-hop echo detection (for a directly connected RIP neighbor)
- RIP BFD configuration (single-hop echo detection/specific destination), Configuring single-hop echo detection (for a specific destination)
- RIP BFD single-hop echo detection, Configuring BFD for RIP
- device
- IP routing IS-IS configuration, IS-IS configuration examples
- IS-IS authentication, IS-IS authentication configuration example
- IS-IS basics configuration, Basic IS-IS configuration example
- IS-IS BFD configuration, BFD for IS-IS configuration example
- IS-IS DIS election configuration, DIS election configuration example
- IS-IS FRR configuration, IS-IS FRR configuration example
- IS-IS GR configuration, IS-IS GR configuration example
- IS-IS NSR configuration, IS-IS NSR configuration example
- IS-IS route redistribution, IS-IS route redistribution configuration example
- OSPF ABR router type, Router types
- OSPF ASBR router type, Router types
- OSPF backbone router type, Router types
- OSPF internal router type, Router types
- OSPF stub router, Configuring stub routers
- OSPFv3 stub router, Configuring stub routers
- routing policy configuration, Routing policy configuration examples
- routing policy configuration (IPv4 route redistribution), Routing policy configuration example for IPv4 route redistribution
- routing policy configuration (IPv6 route redistribution), Routing policy configuration example for IPv6 route redistribution
- DIS
- IS-IS DIS election, DIS and pseudonodes
- IS-IS DIS election configuration, DIS election configuration example
- IS-IS interface DIS priority, Configuring a DIS priority for an interface
- disabling
- IPv4 BGP AS_PATH optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- IPv4 BGP session establishment disable, Disabling BGP to establish a session to a peer or peer group
- IPv6 BGP AS_PATH optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- IPv6 BGP session establishment disable, Disabling BGP to establish a session to a peer or peer group
- IS-IS interface packet send/receive, Disabling an interface from sending/receiving IS-IS packets
- OSPF interface packet send/receive disable, Disabling interfaces from receiving and sending OSPF packets
- OSPFv3 interface packet send/receive, Disabling interfaces from receiving and sending OSPFv3 packets
- RIP host route reception, Disabling host route reception
- discard route (OSPF), Configuring discard routes for summary networks
- displaying
- IP routing BGP, Displaying and maintaining BGP
- IP routing table, Displaying and maintaining a routing table
- IPv4 BGP, Displaying and maintaining BGP
- IPv6 BGP, Displaying and maintaining BGP
- IPv6 IS-IS, Displaying and maintaining IPv6 IS-IS
- IPv6 PBR, Displaying and maintaining IPv6 PBR
- IPv6 static routing, Displaying and maintaining IPv6 static routes
- IS-IS, Displaying and maintaining IS-IS
- OSPF, Displaying and maintaining OSPF
- OSPFv3, Displaying and maintaining OSPFv3
- PBR, Displaying and maintaining PBR
- RIP, Displaying and maintaining RIP
- RIPng, Displaying and maintaining RIPng
- routing policy, Displaying and maintaining the routing policy
- static routing, Displaying and maintaining static routes
- distributing
- IP routing BGP route distribution control, Controlling route distribution and reception
- IP routing extension attribute redistribution, Extension attribute redistribution
- IP routing route redistribution, Route redistribution
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IS-IS route redistribution, Configuring IS-IS route redistribution, IS-IS route redistribution configuration example
- OSPF route redistribution configuration, OSPF route redistribution configuration example
- OSPFv3 route redistribution, Configuring OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- RIPng received/redistributed route filtering, Configuring received/redistributed route filtering
- RIPng route redistribution, Configuring RIPng route redistribution, RIPng route redistribution configuration example
- domain
- IS-IS authentication (routing domain), Configuring routing domain authentication
- IS-IS routing domain, IS-IS area
- DR
- OSPF, DR and BDR
- OSPF DR election configuration, OSPF DR election configuration example
- OSPF election, DR and BDR election
- OSPF mechanism, DR and BDR mechanism
- OSPFv3 DR election configuration, OSPFv3 DR election configuration example
- OSPFv3 interface DR priority, Configuring a DR priority for an interface
- DSCP
- OSPF packet DSCP value, Configuring a DSCP value for OSPF packets
- DSP (IS-IS area address), Area address
- dynamic
- BGP dynamic peer, Configuring dynamic BGP peers
- IP routing dynamic routing protocols, Dynamic routing protocols
- IS-IS system ID > host name mapping, Configuring dynamic system ID to host name mapping
E
- EBGP
- direct connections after link failure, Enabling immediate re-establishment of direct EBGP connections upon link failure
- IP routing BGP first AS number of route updates, Ignoring the first AS number of EBGP route updates
- IPv4 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- IPv4 BGP private AS number removal from EBGP peer/peer group update, Removing private AS numbers from updates sent to an EBGP peer or peer group
- IPv6 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- IPv6 BGP private AS number removal from EBGP peer/peer group update, Removing private AS numbers from updates sent to an EBGP peer or peer group
- peer, BGP speaker and BGP peer
- echo
- IP routing RIP BFD (bidirectional detection/control packet mode), BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- IP routing RIP BFD (single-hop echo detection), BFD for RIP configuration example (single-hop echo detection for a directly connected neighbor)
- IP routing RIP BFD (single-hop echo detection/specific destination), BFD for RIP configuration example (single hop echo detection for a specific destination)
- IPv6 static route BFD echo mode (single hop), Single-hop echo mode
- RIP BFD single-hop echo detection, Configuring BFD for RIP
- static routing BFD single-hop echo mode, Single-hop echo mode
- ECMP, Configuring BGP load balancing, See also
- IP routing ECMP enhanced mode, Enabling the enhanced ECMP mode
- IP routing ECMP route max number, Configuring the maximum number of ECMP routes
- IPv4 BGP load balancing, Configuring BGP load balancing
- IPv6 BGP load balancing, Configuring BGP load balancing
- ISIS ECMP routes max, Configuring the maximum number of ECMP routes
- OSPF ECMP route max, Configuring the maximum number of ECMP routes
- OSPFv3 ECMP route max, Configuring the maximum number of OSPFv3 ECMP routes
- RIP ECMP route max number, Configuring the maximum number of ECMP routes
- RIPng ECMP route max, Configuring the maximum number of ECMP routes
- electing
- OSPF DR election configuration, OSPF DR election configuration example
- OSPFv3 DR election configuration, OSPFv3 DR election configuration example
- enabling
- IP routing BGP, Enabling BGP
- IP routing BGP route flapping logging, Enabling logging for BGP route flapping
- IP routing BGP session state change logging, Enabling logging of session state changes
- IP routing BGP SNMP notification, Enabling SNMP notifications for BGP
- IP routing EBGP direct connections after link failure, Enabling immediate re-establishment of direct EBGP connections upon link failure
- IP routing ECMP enhanced mode, Enabling the enhanced ECMP mode
- IP routing RIP (interface), Enabling RIP on an interface
- IP routing RIP (network), Enabling RIP on a network
- IPv4 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- IPv4 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv4 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv4 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv4 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- IPv4 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- IPv4 BGP route refresh, Enabling route-refresh
- IPv6 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- IPv6 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv6 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv6 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv6 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- IPv6 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- IPv6 BGP route refresh, Enabling route-refresh
- IS-IS, Enabling IS-IS
- IS-IS automatic cost calculation, Enabling automatic IS-IS cost calculation
- IS-IS interface hello packet send, Enabling an interface to send small hello packets
- IS-IS ISPF, Enabling IS-IS ISPF
- IS-IS LSP flash flooding, Enabling LSP flash flooding
- IS-IS LSP fragment extension, Enabling LSP fragment extension
- IS-IS neighbor state change logging, Enabling the logging of neighbor state changes
- IS-IS PPP interface hello packet source address check, Enabling source address check for hello packets on a PPP interface
- OSPF (on interface), Enabling OSPF on an interface
- OSPF (on network), Enabling OSPF on a network
- OSPF ISPF, Enabling OSPF ISPF
- OSPF neighbor state change logging, Logging neighbor state changes
- OSPF PIC, Enabling OSPF PIC
- OSPF RFC 1583 compatibility, Enabling compatibility with RFC 1583
- OSPFv3, Enabling OSPFv3
- OSPFv3 neighbor state change logging, Enabling the logging of neighbor state changes
- RIP, Enabling RIP
- RIP FRR BFD, Enabling BFD for RIP FRR
- RIP poison reverse, Enabling poison reverse
- RIP split horizon, Enabling split horizon
- RIP update source IP address check, Enabling source IP address check on incoming RIP updates
- RIPv1 incoming message zero field check, Enabling zero field check on incoming RIPv1 messages
- RIPv2 automatic route summarization, Enabling RIPv2 automatic route summarization
- support for IPv6 routes with prefixes longer than 64 bits, Enabling support for IPv6 routes with prefixes longer than 64 bits
- enhancing
- IS-IS network security, Enhancing IS-IS network security
- establishing
- IPv4 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- IPv4 BGP session establishment disable, Disabling BGP to establish a session to a peer or peer group
- IPv6 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- IPv6 BGP session establishment disable, Disabling BGP to establish a session to a peer or peer group
- exit overflow interval (OSPF), Configuring OSPF exit overflow interval
- extending
- IP routing MP-BGP MP_REACH_NLRI extended attribute, MP-BGP extended attributes
- IP routing MP-BGP MP_UNREACH_NLRI extended attribute, MP-BGP extended attributes
- IS-IS LSP fragment extension, Enabling LSP fragment extension
- Exterior Gateway Protocol. Use EGP
- external
- OSPF LSDB external LSAs max number, Configuring the maximum number of external LSAs in LSDB
- external BGP. Use EGP
F
- fast reroute. Use
- FIB
- IP routing table, Routing table
- filtering
- IP routing BGP configuration, Configuring BGP, BGP configuration task list
- IP routing BGP route filtering policies, Configuring BGP route filtering policies
- IPv4 BGP basics, Basic BGP configuration example
- IPv4 BGP BFD, BFD for BGP configuration example
- IPv4 BGP COMMUNITY, BGP community configuration example
- IPv4 BGP confederation, BGP confederation configuration example
- IPv4 BGP configuration, IPv4 BGP configuration examples
- IPv4 BGP FRR, BGP FRR configuration example
- IPv4 BGP GR, BGP GR configuration example
- IPv4 BGP load balancing, BGP load balancing configuration example
- IPv4 BGP path selection, BGP path selection configuration example
- IPv4 BGP route distribution filtering policies, Configuring BGP route distribution filtering policies
- IPv4 BGP route reception filtering policies, Configuring BGP route reception filtering policies
- IPv4 BGP route reflector, BGP route reflector configuration example
- IPv4 BGP route summarization, BGP route summarization configuration example
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IPv6 BGP basics, IPv6 BGP basic configuration example
- IPv6 BGP BFD, BFD for IPv6 BGP configuration example
- IPv6 BGP configuration, IPv6 BGP configuration examples
- IPv6 BGP FRR, IPv6 BGP FRR configuration example
- IPv6 BGP route distribution filtering policies, Configuring BGP route distribution filtering policies
- IPv6 BGP route reception filtering policies, Configuring BGP route reception filtering policies
- IPv6 BGP route reflector, IPv6 BGP route reflector configuration example
- IS-IS LSP-calculated routes, Filtering routes calculated from received LSPs
- IS-IS redistributed routes, Filtering redistributed routes
- IS-IS routes, Configuring IS-IS route filtering
- OSPF received route filtering, Configuring received OSPF route filtering
- OSPF Type-3 LSA filtering, Configuring Type-3 LSA filtering
- OSPFv3 Inter-Area-Prefix LSA filtering, Configuring Inter-Area-Prefix LSA filtering
- OSPFv3 received route filtering, Configuring OSPFv3 received route filtering
- RIP received/redistributed route filtering, Configuring received/redistributed route filtering
- RIPng received/redistributed route filtering, Configuring received/redistributed route filtering
- routing policy ACLs, ACL
- routing policy apply clause, Configuring apply clauses
- routing policy AS_PATH list, AS path list, Configuring an AS path list
- routing policy COMMUNITY list, Community list, Configuring a community list
- routing policy configuration, Configuring routing policies, Configuring a routing policy, Routing policy configuration examples
- routing policy configuration (IPv4 route redistribution), Routing policy configuration example for IPv4 route redistribution
- routing policy configuration (IPv6 route redistribution), Routing policy configuration example for IPv6 route redistribution
- routing policy continue clause, Configuring the continue clause
- routing policy creation, Creating a routing policy
- routing policy extended community list, Extended community list, Configuring an extended community list
- routing policy filter configuration, Configuring filters
- routing policy filters, Filters
- routing policy if-match clause, Configuring if-match clauses
- routing policy IP prefix list, Configuring an IP prefix list
- routing policy prefix list, IP prefix list
- flooding
- IS-IS LSP flash flooding, Enabling LSP flash flooding
- format
- IS-IS address format, IS-IS address format
- IS-IS NSAP address format, NSAP
- forwarding
- IPv6 IS-IS BFD configuration, Configuring BFD for IPv6 IS-IS, BFD for IPv6 IS-IS configuration example
- IPv6 PBR configuration, Configuring IPv6 PBR, IPv6 PBR configuration task list, Configuring IPv6 PBR, IPv6 PBR configuration examples
- IPv6 PBR interface configuration, Configuring IPv6 interface PBR
- IPv6 PBR interface configuration (packet type-based), Packet type-based IPv6 interface PBR configuration example
- IPv6 PBR local configuration, Configuring IPv6 local PBR
- IPv6 PBR local configuration (packet type-based), Packet type-based IPv6 local PBR configuration example
- IPv6 PBR policy configuration, Configuring an IPv6 policy
- OSPF GR, Configuring OSPF GR
- OSPF GR helper, Configuring OSPF GR helper
- OSPF GR restarter, Configuring OSPF GR restarter
- OSPF NSR, Configuring OSPF NSR
- OSPF NSR configuration, OSPF NSR configuration example
- OSPFv3 BFD, Configuring BFD for OSPFv3
- OSPFv3 NSR, Configuring OSPFv3 NSR
- OSPFv3 NSR configuration, OSPFv3 NSR configuration example
- PBR configuration, Configuring PBR, PBR configuration task list, Configuring PBR, PBR configuration examples
- PBR configuration (interface), Configuring interface PBR
- PBR configuration (interface/packet type-based), Packet type-based interface PBR configuration example
- PBR configuration (local), Configuring local PBR
- PBR configuration (local/packet type-based), Packet type-based local PBR configuration example
- PBR policy configuration, Configuring a policy
- fragment
- IS-IS LSP fragment extension, Enabling LSP fragment extension
- FRR
- BFD enable, Enabling BFD for RIP FRR
- IP routing BGP FRR configuration, Configuring BGP FRR
- IP routing IS-IS FRR automatic backup next hop calculation, Configuring IS-IS FRR to automatically calculate a backup next hop
- IP routing IS-IS FRR BFD, Configuring BFD for IS-IS FRR
- IP routing RIP FRR, RIP FRR configuration example
- IPv4 BGP FRR, BGP FRR configuration example
- IPv6 BGP FRR, IPv6 BGP FRR configuration example
- IS-IS FRR, Configuring IS-IS FRR
- IS-IS FRR configuration, IS-IS FRR configuration example
- OSPF backup next hop (routing policy), Configuring OSPF FRR to specify a backup next hop using a routing policy
- OSPF backup next hop calculation (LFA algorithm), Configuring OSPF FRR to calculate a backup next hop using the LFA algorithm
- OSPF configuration, Configuring OSPF FRR, OSPF FRR configuration example
- OSPF FRR BFD, Configuring BFD for OSPF FRR
- RIP configuration, Configuring RIP FRR
- static routing FRR configuration, Configuring static route FRR, Static route FRR configuration example
G
- garbage-collect timer (RIP), Configuring RIP timers
- Generalized TTL Security Mechanism. See
- generating
- IP routing BGP route, Generating BGP routes
- OSPFv3 LSA generation interval, Specifying the LSA generation interval
- Graceful Restart (GR)
- IP routing BGP configuration, Configuring BGP GR
- IPv4 BGP GR configuration, BGP GR configuration example
- IS-IS GR configuration, Configuring IS-IS GR, IS-IS GR configuration example
- IS-IS GR helper, Configuring IS-IS GR
- IS-IS GR restarter, Configuring IS-IS GR
- IS-IS NSR, Configuring IS-IS NSR
- IS-IS NSR configuration, IS-IS NSR configuration example
- OSPF configuration, OSPF GR configuration example
- OSPF GR configuration, Configuring OSPF GR
- OSPF GR helper configuration, Configuring OSPF GR helper
- OSPF GR restarter configuration, Configuring OSPF GR restarter
- OSPF NSR, Configuring OSPF NSR
- OSPF trigger, Triggering OSPF GR
- OSPFv3 GR configuration, Configuring OSPFv3 GR, OSPFv3 GR configuration example
- OSPFv3 GR helper configuration, Configuring GR helper
- OSPFv3 GR restarter configuration, Configuring GR restarter
- OSPFv3 trigger, Triggering OSPFv3 GR
- RIP configuration, Configuring RIP GR
- RIP GR helper configuration, Configuring RIP GR
- RIP GR restarter configuration, Configuring RIP GR
- RIPng configuration, Configuring RIPng GR
- group
- IP routing BGP peer group, Configuring a BGP peer group
- GTSM
- IP routing BGP configuration, Configuring GTSM for BGP
H
- hello
- IS-IS hello multiplier, Specifying the IS-IS hello multiplier
- IS-IS hello packet send interval, Specifying the interval for sending IS-IS hello packets
- IS-IS interface hello packet send, Enabling an interface to send small hello packets
- IS-IS PDU type, Hello PDU
- IS-IS PPP interface hello packet source address check, Enabling source address check for hello packets on a PPP interface
- OSPF hello packet, OSPF packets
- OSPF hello packet timer, Configuring OSPF timers
- OSPFv3 packet type, OSPFv3 packets
- HO-DSP (IS-IS area address), Area address
- holdtime
- IPv4 BGP, Configuring the keepalive interval and hold time
- IPv6 BGP, Configuring the keepalive interval and hold time
- hop
- OSPF BFD detection configuration (single-hop echo), Configuring single-hop echo detection
- RIP BFD configuration (bidirectional control detection), Configuring bidirectional control detection
- RIP BFD configuration (single-hop echo detection/neighbor), Configuring single-hop echo detection (for a directly connected RIP neighbor)
- RIP BFD configuration (single-hop echo detection/specific destination), Configuring single-hop echo detection (for a specific destination)
- host
- IS-IS system ID > host name mapping, Configuring system ID to host name mappings
- host route reception, Disabling host route reception
I
- IBGP
- IP routing BGP confederation, Configuring a BGP confederation
- IPv4 BGP ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- IPv4 BGP route reflector, Configuring a BGP route reflector
- IPv6 BGP ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- IPv6 BGP route reflector, Configuring a BGP route reflector
- peer, BGP speaker and BGP peer
- ICMP
- OSPF area configuration (NSSA), OSPF NSSA area configuration example)
- OSPF area configuration (stub), OSPF stub area configuration example
- OSPF basics configuration, Basic OSPF configuration example
- OSPF BFD configuration, BFD for OSPF configuration example
- OSPF configuration, Configuring OSPF, OSPF configuration task list, OSPF configuration examples
- OSPF DR election configuration, OSPF DR election configuration example
- OSPF FRR configuration, OSPF FRR configuration example
- OSPF GR configuration, OSPF GR configuration example
- OSPF route redistribution configuration, OSPF route redistribution configuration example
- OSPF route summarization configuration, OSPF route summarization configuration example
- OSPF virtual link configuration, OSPF virtual link configuration example
- OSPFv3 route summarization, OSPFv3 route summarization configuration example
- ID
- IS-IS system ID, System ID
- IDP (IS-IS area address), Area address
- IETF
- OSPF GR, Configuring OSPF GR
- OSPF GR helper, Configuring OSPF GR helper
- OSPF GR restarter, Configuring OSPF GR restarter
- ignoring
- IP routing BGP first AS number of EBGP route updates, Ignoring the first AS number of EBGP route updates
- IPv4 BGP ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- IPv6 BGP ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- OSPFv3 DD packet MTU check, Ignoring MTU check for DD packets
- IGP
- IP routing BGP ORIGIN path attribute, BGP path attributes
- IP routing IS-IS configuration, IS-IS configuration examples
- IP routing RIP configuration, RIP configuration examples
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IS-IS basic configuration, Configuring basic IS-IS
- IS-IS basics configuration, Basic IS-IS configuration example
- IS-IS configuration, Configuring IS-IS, IS-IS configuration task list
- IS-IS DIS election configuration, DIS election configuration example
- RIP BFD configuration (bidirectional control detection), Configuring bidirectional control detection
- RIP BFD configuration (single-hop echo detection/neighbor), Configuring single-hop echo detection (for a directly connected RIP neighbor)
- RIP BFD configuration (single-hop echo detection/specific destination), Configuring single-hop echo detection (for a specific destination)
- RIP configuration, Configuring RIP, RIP configuration task list
- RIP neighbor specification, Specifying a RIP neighbor
- INCOMPLETE
- IP routing BGP ORIGIN path attribute, BGP path attributes
- Incremental Shortest Path First. Use
- injecting
- IPv4 BGP local network, Injecting a local network
- IPv6 BGP local network, Injecting a local network
- inter-area
- OSPF route type, Route types
- interface
- IPv6 PBR interface configuration, Configuring IPv6 interface PBR
- IPv6 PBR interface configuration (packet type-based), Packet type-based IPv6 interface PBR configuration example
- PBR configuration (interface), Configuring interface PBR
- PBR configuration (interface/packet type-based), Packet type-based interface PBR configuration example
- Intermediate System-to-Intermediate System. Use
- internal
- IP routing BGP. Use
- OSPF router type, Router types
- INTERNET
- IP routing BGP COMMUNITY path attribute, BGP path attributes
- interval
- IP routing BGP soft reset, Configuring BGP soft-reset
- IPv4 BGP keepalive interval, Configuring the keepalive interval and hold time
- IPv4 BGP route update interval, Configuring the interval for sending updates for the same route
- IPv6 BGP keepalive interval, Configuring the keepalive interval and hold time
- IPv6 BGP route update interval, Configuring the interval for sending updates for the same route
- IS-IS CSNP packet send interval, Specifying the interval for sending IS-IS CSNP packets
- IS-IS hello multiplier, Specifying the IS-IS hello multiplier
- IS-IS hello packet send interval, Specifying the interval for sending IS-IS hello packets
- IS-IS SPF calculation interval, Controlling SPF calculation interval
- OSPF exit overflow interval, Configuring OSPF exit overflow interval
- OSPF LSA arrival interval, Specifying the LSA arrival interval
- OSPF LSA generation interval, Specifying the LSA generation interval
- OSPF LSU transmit rate, Configuring the LSU transmit rate
- OSPF SPF calculation interval, Specifying SPF calculation interval
- OSPFv3 LSA generation interval, Specifying the LSA generation interval
- OSPFv3 LSU transmit rate, Configuring the LSU transmit rate
- OSPFv3 SPF calculation interval, Specifying SPF calculation interval
- intra-area
- OSPF route type, Route types
- IP addressing
- IP routing RIP configuration, RIP configuration examples
- RIP configuration, Configuring RIP, RIP configuration task list
- RIP update source IP address check, Enabling source IP address check on incoming RIP updates
- IP routing
- BGP 6PE basics, Configuring basic 6PE
- BGP 6PE optional capabilities, Configuring optional 6PE capabilities
- BGP AS_PATH attribute, Configuring the AS_PATH attribute
- BGP community, Settlements for problems in large-scale BGP networks
- BGP confederation, Settlements for problems in large-scale BGP networks, Configuring a BGP confederation
- BGP confederation compatibility, Configuring confederation compatibility
- BGP configuration, Configuring BGP, BGP configuration task list
- BGP default route advertisement to peer/peer group, Advertising a default route to a peer or peer group
- BGP dynamic peer, Configuring dynamic BGP peers
- BGP dynamic peer (IPv4 unicast address), Configuring dynamic BGP peers (IPv4 unicast address family)
- BGP dynamic peer (IPv6 unicast address), Configuring dynamic BGP peers (IPv6 unicast address family)
- BGP first AS number of EBGP route updates, Ignoring the first AS number of EBGP route updates
- BGP FRR, Configuring BGP FRR
- BGP GR, Configuring BGP GR
- BGP GR helper, Configuring BGP GR
- BGP GR restarter, Configuring BGP GR
- BGP GTSM configuration, Configuring GTSM for BGP
- BGP large scale network management, Settlements for problems in large-scale BGP networks
- BGP large-scale network, Configuring a large-scale BGP network
- BGP load balancing, BGP load balancing
- BGP MED attribute, Configuring the MED attribute
- BGP network optimization, Tuning and optimizing BGP networks
- BGP NSR, Configuring BGP NSR
- BGP optimal route advertisement, Advertising optimal routes in the IP routing table
- BGP path selection, Controlling BGP path selection
- BGP peer, Configuring a BGP peer
- BGP peer group, Settlements for problems in large-scale BGP networks, Configuring a BGP peer group
- BGP protocols and standards, Protocols and standards
- BGP route dampening, Settlements for problems in large-scale BGP networks
- BGP route distribution, Controlling route distribution and reception
- BGP route filtering policies, Configuring BGP route filtering policies
- BGP route flapping logging, Enabling logging for BGP route flapping
- BGP route generation, Generating BGP routes
- BGP route reception, Controlling route distribution and reception
- BGP route recursion, BGP load balancing
- BGP route reflection, Configuring BGP route reflection
- BGP route selection, BGP route selection, BGP load balancing
- BGP route summarization, Settlements for problems in large-scale BGP networks, Configuring BGP route summarization
- BGP session state change logging, Enabling logging of session state changes
- BGP SNMP notification enable, Enabling SNMP notifications for BGP
- BGP soft reset, Configuring BGP soft-reset
- BGP TCP connection source address, Specifying the source address of TCP connections
- BGP update sending delay, Configuring BGP update sending delay
- configuration, Configuring basic IP routing
- displaying BGP, Displaying and maintaining BGP
- displaying IPv6 static routing, Displaying and maintaining IPv6 static routes
- displaying PBR, Displaying and maintaining PBR
- displaying routing table, Displaying and maintaining a routing table
- displaying static routes, Displaying and maintaining static routes
- dynamic routing protocols, Dynamic routing protocols
- ECMP enhanced mode enable, Enabling the enhanced ECMP mode
- ECMP route max number configuration, Configuring the maximum number of ECMP routes
- extension attribute redistribution, Extension attribute redistribution
- FIB route max lifetime, Configuring the maximum lifetime for routes in the FIB
- IPv4. See
- IPv6. See
- IPv6 BGP IPsec, Configuring IPsec for IPv6 BGP
- IPv6 default route. See under IPv6 static routing
- IPv6 IS-IS, Configuring IPv6 IS-IS, See also
- IPv6 IS-IS display, Displaying and maintaining IPv6 IS-IS
- IPv6 policy-based routing. See
- IPv6 static routing. See
- IS-IS authentication, IS-IS authentication configuration example
- IS-IS authentication (area), Configuring area authentication
- IS-IS authentication (neighbor relationship), Configuring neighbor relationship authentication
- IS-IS authentication (routing domain), Configuring routing domain authentication
- IS-IS automatic cost calculation, Enabling automatic IS-IS cost calculation
- IS-IS basic configuration, Configuring basic IS-IS
- IS-IS basics configuration, Basic IS-IS configuration example
- IS-IS BFD, Configuring BFD for IS-IS
- IS-IS BFD configuration, BFD for IS-IS configuration example
- IS-IS configuration, Configuring IS-IS, IS-IS configuration task list, IS-IS configuration examples
- IS-IS CSNP packet send interval, Specifying the interval for sending IS-IS CSNP packets
- IS-IS default route advertisement, Advertising a default route
- IS-IS DIS election configuration, DIS election configuration example
- IS-IS display, Displaying and maintaining IS-IS
- IS-IS ECMP routes max, Configuring the maximum number of ECMP routes
- IS-IS FRR, Configuring IS-IS FRR
- IS-IS FRR configuration, IS-IS FRR configuration example
- IS-IS global cost, Configuring a global IS-IS cost
- IS-IS GR, Configuring IS-IS GR
- IS-IS GR configuration, IS-IS GR configuration example
- IS-IS hello multiplier, Specifying the IS-IS hello multiplier
- IS-IS hello packet send interval, Specifying the interval for sending IS-IS hello packets
- IS-IS interface cost, Configuring an IS-IS cost for an interface
- IS-IS interface DIS priority, Configuring a DIS priority for an interface
- IS-IS interface hello packet send, Enabling an interface to send small hello packets
- IS-IS interface packet send/receive, Disabling an interface from sending/receiving IS-IS packets
- IS-IS ISPF, Enabling IS-IS ISPF
- IS-IS link cost, Configuring IS-IS link cost
- IS-IS LSDB overload bit, Setting the LSDB overload bit
- IS-IS LSP flash flooding, Enabling LSP flash flooding
- IS-IS LSP fragment extension, Enabling LSP fragment extension
- IS-IS LSP length, Specifying LSP lengths
- IS-IS LSP parameters, Configuring LSP parameters
- IS-IS LSP timer, Configuring LSP timers
- IS-IS LSP-calculated route filtering, Filtering routes calculated from received LSPs
- IS-IS maintain, Displaying and maintaining IS-IS
- IS-IS network management, Configuring IS-IS network management
- IS-IS network optimization, Tuning and optimizing IS-IS networks
- IS-IS network security enhancement, Enhancing IS-IS network security
- IS-IS network tuning, Tuning and optimizing IS-IS networks
- IS-IS NSR, Configuring IS-IS NSR
- IS-IS NSR configuration, IS-IS NSR configuration example
- IS-IS PDU CLVs, CLV
- IS-IS PDU hello type, Hello PDU
- IS-IS PDU LSP type, LSP
- IS-IS PDU SNP type, SNP
- IS-IS PDU types, IS-IS PDUs
- IS-IS preference, Specifying a preference for IS-IS
- IS-IS protocols and standards, Protocols and standards
- IS-IS redistributed route filtering, Filtering redistributed routes
- IS-IS route control, Configuring IS-IS route control
- IS-IS route convergence priority, Configuring convergence priorities for specific routes
- IS-IS route filtering, Configuring IS-IS route filtering
- IS-IS route leaking, Route leaking, Configuring IS-IS route leaking
- IS-IS route redistribution, Configuring IS-IS route redistribution, IS-IS route redistribution configuration example
- IS-IS route summarization, Configuring IS-IS route summarization
- IS-IS routing domain, IS-IS area
- IS-IS SPF calculation interval, Controlling SPF calculation interval
- IS-IS system ID > host name mapping, Configuring system ID to host name mappings
- load sharing, Load sharing
- maintaining BGP, Displaying and maintaining BGP
- maintaining PBR, Displaying and maintaining PBR
- maintaining routing table, Displaying and maintaining a routing table
- MP-BGP, MP-BGP
- MP-BGP protocols and standards, Protocols and standards
- OSPF area, Configuring OSPF areas
- OSPF area configuration (NSSA), Configuring an NSSA area, OSPF NSSA area configuration example)
- OSPF area configuration (stub), Configuring a stub area, OSPF stub area configuration example
- OSPF authentication, Configuring OSPF authentication
- OSPF basics configuration, Basic OSPF configuration example
- OSPF BDR, DR and BDR
- OSPF BFD configuration, Configuring BFD for OSPF, Configuring BFD for OSPF, BFD for OSPF configuration example
- OSPF BFD detection configuration (bidirectional control), Configuring bidirectional control detection
- OSPF BFD detection configuration (single-hop echo), Configuring single-hop echo detection
- OSPF configuration, Configuring OSPF, OSPF configuration task list, OSPF configuration examples
- OSPF DD packet interface MTU, Adding the interface MTU into DD packets
- OSPF discard route configuration, Configuring discard routes for summary networks
- OSPF display, Displaying and maintaining OSPF
- OSPF DR, DR and BDR
- OSPF DR election configuration, OSPF DR election configuration example
- OSPF ECMP route max, Configuring the maximum number of ECMP routes
- OSPF exit overflow interval, Configuring OSPF exit overflow interval
- OSPF FRR BFD, Configuring BFD for OSPF FRR
- OSPF FRR configuration, Configuring OSPF FRR, OSPF FRR configuration example
- OSPF GR, Configuring OSPF GR
- OSPF GR configuration, OSPF GR configuration example
- OSPF GR helper, Configuring OSPF GR helper
- OSPF GR restarter, Configuring OSPF GR restarter
- OSPF host route advertisement, Advertising a host route
- OSPF interface cost, Configuring an OSPF cost for an interface
- OSPF interface network type (broadcast), Configuring the broadcast network type for an interface
- OSPF interface network type (NBMA), Configuring the NBMA network type for an interface
- OSPF interface network type (P2MP), Configuring the P2MP network type for an interface
- OSPF interface network type (P2P), Configuring the P2P network type for an interface
- OSPF interface packet send/receive disable, Disabling interfaces from receiving and sending OSPF packets
- OSPF ISPF, Enabling OSPF ISPF
- OSPF log count, Configuring the number of OSPF logs
- OSPF LSA arrival interval, Specifying the LSA arrival interval
- OSPF LSA generation interval, Specifying the LSA generation interval
- OSPF LSA transmission delay, Specifying LSA transmission delay
- OSPF LSDB external LSAs max number, Configuring the maximum number of external LSAs in LSDB
- OSPF LSU transmit rate, Configuring the LSU transmit rate
- OSPF maintain, Displaying and maintaining OSPF
- OSPF neighbor state change, Logging neighbor state changes
- OSPF network management traps, Configuring OSPF network management
- OSPF network optimization, Tuning and optimizing OSPF networks
- OSPF network tuning, Tuning and optimizing OSPF networks
- OSPF network type, Configuring OSPF network types
- OSPF NSR, Configuring OSPF NSR
- OSPF NSR configuration, OSPF NSR configuration example
- OSPF packet DSCP value, Configuring a DSCP value for OSPF packets
- OSPF PIC configuration, Configuring OSPF PIC
- OSPF preference, Configuring OSPF preference
- OSPF prefix prioritization, Configuring prefix prioritization
- OSPF prefix suppression, Configuring prefix suppression
- OSPF protocols and standards, Protocols and standards
- OSPF received route filtering, Configuring received OSPF route filtering
- OSPF RFC 1583 compatibility, Enabling compatibility with RFC 1583
- OSPF route control, Configuring OSPF route control
- OSPF route redistribution, Configuring OSPF route redistribution
- OSPF route redistribution configuration, OSPF route redistribution configuration example
- OSPF route summarization, Configuring OSPF route summarization
- OSPF route summarization configuration, OSPF route summarization configuration example
- OSPF SPF calculation interval, Specifying SPF calculation interval
- OSPF stub router, Configuring stub routers
- OSPF timer configuration, Configuring OSPF timers
- OSPF Type-3 LSA filtering, Configuring Type-3 LSA filtering
- OSPF virtual link, Configuring a virtual link
- OSPF virtual link configuration, OSPF virtual link configuration example
- OSPFv3 area parameter, Configuring OSPFv3 area parameters
- OSPFv3 BFD, Configuring BFD for OSPFv3
- OSPFv3 BFD configuration, BFD for OSPFv3 configuration example
- OSPFv3 configuration, Configuring OSPFv3, OSPFv3 configuration task list, OSPFv3 configuration examples
- OSPFv3 DD packet ignore MTU check, Ignoring MTU check for DD packets
- OSPFv3 display, Displaying and maintaining OSPFv3
- OSPFv3 DR election configuration, OSPFv3 DR election configuration example
- OSPFv3 ECMP route max, Configuring the maximum number of OSPFv3 ECMP routes
- OSPFv3 enable, Enabling OSPFv3
- OSPFv3 GR, Configuring OSPFv3 GR
- OSPFv3 GR configuration, OSPFv3 GR configuration example
- OSPFv3 GR helper, Configuring GR helper
- OSPFv3 GR restarter, Configuring GR restarter
- OSPFv3 Inter-Area-Prefix LSA filtering, Configuring Inter-Area-Prefix LSA filtering
- OSPFv3 interface cost, Configuring an OSPFv3 cost for an interface
- OSPFv3 interface DR priority, Configuring a DR priority for an interface
- OSPFv3 interface packet send/receive disable, Disabling interfaces from receiving and sending OSPFv3 packets
- OSPFv3 IPsec profile application, Applying an IPsec profile
- OSPFv3 IPsec profile configuration, OSPFv3 IPsec profile configuration example
- OSPFv3 LSA generation interval, Specifying the LSA generation interval
- OSPFv3 LSA transmission delay, Specifying LSA transmission delay
- OSPFv3 LSU transmit rate, Configuring the LSU transmit rate
- OSPFv3 maintain, Displaying and maintaining OSPFv3
- OSPFv3 NBMA neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 neighbor state change logging, Enabling the logging of neighbor state changes
- OSPFv3 network management traps, Configuring OSPFv3 network management
- OSPFv3 network optimization, Tuning and optimizing OSPFv3 networks
- OSPFv3 network tuning, Tuning and optimizing OSPFv3 networks
- OSPFv3 network type, Configuring OSPFv3 network types
- OSPFv3 network type (interface), Configuring the OSPFv3 network type for an interface
- OSPFv3 NSR, Configuring OSPFv3 NSR
- OSPFv3 NSR configuration, OSPFv3 NSR configuration example
- OSPFv3 NSSA area, Configuring an NSSA area
- OSPFv3 NSSA area configuration, OSPFv3 NSSA area configuration example
- OSPFv3 P2MP neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 preference, Configuring a preference for OSPFv3
- OSPFv3 prefix suppression, Configuring prefix suppression
- OSPFv3 protocols and standards, Protocols and standards
- OSPFv3 received route filtering, Configuring OSPFv3 received route filtering
- OSPFv3 redistributed route summarization (ASBR), Configuring route summarization on an ASBR
- OSPFv3 route control, Configuring OSPFv3 route control
- OSPFv3 route redistribution, Configuring OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- OSPFv3 route summarization, Configuring OSPFv3 route summarization, OSPFv3 route summarization configuration example
- OSPFv3 route summarization (ABR), Configuring route summarization on an ABR
- OSPFv3 SPF calculation interval, Specifying SPF calculation interval
- OSPFv3 stub area, Configuring a stub area
- OSPFv3 stub area configuration, OSPFv3 stub area configuration example
- OSPFv3 stub router, Configuring stub routers
- OSPFv3 timer, Configuring OSPFv3 timers
- OSPFv3 virtual link, Configuring an OSPFv3 virtual link
- PBR configuration, PBR configuration task list, Configuring PBR, PBR configuration examples
- PBR configuration (interface), Configuring interface PBR
- PBR configuration (local), Configuring local PBR
- PBR node action, Configuring actions for a node
- PBR node creation, Creating a node
- PBR node match criteria, Configuring match criteria for a node
- PBR policy, Policy
- PBR policy configuration, Configuring a policy
- PBR-Track collaboration, PBR and Track
- policy apply clause, Configuring apply clauses
- policy AS_PATH list, Configuring an AS path list
- policy COMMUNITY list, Configuring a community list
- policy configuration, Configuring routing policies, Configuring a routing policy, Routing policy configuration examples
- policy configuration (IPv4 route redistribution), Routing policy configuration example for IPv4 route redistribution
- policy configuration (IPv6 route redistribution), Routing policy configuration example for IPv6 route redistribution
- policy continue clause, Configuring the continue clause
- policy creation, Creating a routing policy
- policy display, Displaying and maintaining the routing policy
- policy extended community list, Configuring an extended community list
- policy filter configuration, Configuring filters
- policy filtering, Routing policy
- policy filters, Filters
- policy if-match clause, Configuring if-match clauses
- policy IP prefix list, Configuring an IP prefix list
- policy maintain, Displaying and maintaining the routing policy
- policy-based routing. Use
- RIB label max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- RIB route max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- RIP additional routing metric configuration, Configuring an additional routing metric
- RIP basic configuration, Configuring basic RIP
- RIP basics, Basic RIP configuration example
- RIP BFD (bidirectional detection/control packet mode), BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- RIP BFD (single-hop echo detection), BFD for RIP configuration example (single-hop echo detection for a directly connected neighbor)
- RIP BFD (single-hop echo detection/specific destination), BFD for RIP configuration example (single hop echo detection for a specific destination)
- RIP BFD configuration, Configuring BFD for RIP
- RIP BFD configuration (bidirectional control detection), Configuring bidirectional control detection
- RIP BFD configuration (single-hop echo detection/neighbor), Configuring single-hop echo detection (for a directly connected RIP neighbor)
- RIP BFD configuration (single-hop echo detection/specific destination), Configuring single-hop echo detection (for a specific destination)
- RIP configuration, Configuring RIP, RIP configuration task list, RIP configuration examples
- RIP default route advertisement, Advertising a default route
- RIP ECMP route max number, Configuring the maximum number of ECMP routes
- RIP FRR, RIP FRR configuration example
- RIP FRR configuration, Configuring RIP FRR
- RIP GR configuration, Configuring RIP GR
- RIP host route reception disable, Disabling host route reception
- RIP interface additional metric, RIP interface additional metric configuration example
- RIP interface advertisement control, Controlling RIP reception and advertisement on interfaces
- RIP interface reception control, Controlling RIP reception and advertisement on interfaces
- RIP neighbor specification, Specifying a RIP neighbor
- RIP network management configuration, Configuring RIP network management
- RIP network optimization, Tuning and optimizing RIP networks
- RIP network tuning, Tuning and optimizing RIP networks
- RIP operation, RIP operation
- RIP packet max length, Setting the maximum length of RIP packets
- RIP packet send rate configuration, Configuring the RIP packet sending rate
- RIP poison reverse configuration, Enabling split horizon and poison reverse
- RIP preference configuration, Configuring a preference for RIP
- RIP received/redistributed route filtering, Configuring received/redistributed route filtering
- RIP route control configuration, Configuring RIP route control
- RIP route entries, RIP route entries
- RIP route redistribution, RIP route redistribution configuration example
- RIP route redistribution configuration, Configuring RIP route redistribution
- RIP routing loop prevention, Routing loop prevention
- RIP split horizon configuration, Enabling split horizon and poison reverse
- RIP summary route advertisement, RIP summary route advertisement configuration example
- RIP timer configuration, Configuring RIP timers
- RIP update source IP address check, Enabling source IP address check on incoming RIP updates
- RIP version configuration, Configuring a RIP version
- RIP versions, RIP versions
- RIPng basic configuration, Configuring basic RIPng, Basic RIPng configuration example
- RIPng configuration, Configuring RIPng, RIPng configuration task list, RIPng configuration examples
- RIPng default route advertisement, Advertising a default route
- RIPng display, Displaying and maintaining RIPng
- RIPng ECMP route max, Configuring the maximum number of ECMP routes
- RIPng GR configuration, Configuring RIPng GR
- RIPng IPsec profile application, Applying an IPsec profile
- RIPng IPsec profile configuration, RIPng IPsec profile configuration example
- RIPng maintain, Displaying and maintaining RIPng
- RIPng network optimization, Tuning and optimizing the RIPng network
- RIPng network tuning, Tuning and optimizing the RIPng network
- RIPng packet, RIPng packets
- RIPng packet zero field check configuration, Configuring zero field check on RIPng packets
- RIPng poison reverse configuration, Configuring split horizon and poison reverse
- RIPng preference, Configuring a preference for RIPng
- RIPng protocols and standards, Protocols and standards
- RIPng received/redistributed route filtering, Configuring received/redistributed route filtering
- RIPng route control, Configuring RIPng route control
- RIPng route entry, RIPng route entries
- RIPng route redistribution, Configuring RIPng route redistribution, RIPng route redistribution configuration example
- RIPng route summarization, Configuring RIPng route summarization
- RIPng routing metric configuration, Configuring an additional routing metric
- RIPng split horizon configuration, Configuring split horizon and poison reverse
- RIPng timer configuration, Configuring RIPng timers
- RIPv1 message zero field check, Enabling zero field check on incoming RIPv1 messages
- RIPv2 message authentication configuration, Configuring RIPv2 message authentication
- RIPv2 route summarization configuration, Configuring RIPv2 route summarization
- route backup, Route backup
- route preference, Route preference
- route recursion, Route recursion
- route redistribution, Route redistribution
- routing table, Routing table
- static route, Static route configuration examples
- static routing basic configuration, Basic static route configuration example
- static routing BFD bidirectional control mode (direct next hop), Bidirectional control mode
- static routing BFD bidirectional control mode (indirect next hop), Bidirectional control mode
- static routing BFD configuration, Configuring BFD for static routes
- static routing BFD configuration (direct next hop), BFD for static routes configuration example (direct next hop)
- static routing BFD configuration (indirect next hop), BFD for static routes configuration example (indirect next hop)
- static routing BFD single-hop echo mode, Single-hop echo mode
- static routing configuration, Configuring static routing, Configuring a static route
- static routing default route configuration, Configuring a default route
- static routing FRR configuration, Configuring static route FRR, Static route FRR configuration example
- support for IPv6 routes with prefixes longer than 64 bits, Enabling support for IPv6 routes with prefixes longer than 64 bits
- troubleshooting BGP, Troubleshooting BGP
- troubleshooting BGP peer connection state, Symptom
- troubleshooting OSPF configuration, Troubleshooting OSPF configuration
- troubleshooting OSPF incorrect routing information, Incorrect routing information
- troubleshooting OSPF no neighbor relationship established, No OSPF neighbor relationship established
- IPsec
- IPv6 BGP packet IPsec, IPsec for IPv6 BGP packets configuration example
- OSPFv3 IPsec profile application, Applying an IPsec profile
- OSPFv3 IPsec profile configuration, OSPFv3 IPsec profile configuration example
- RIPng IPsec profile application, Applying an IPsec profile
- RIPng IPsec profile configuration, RIPng IPsec profile configuration example
- IPv4
- IP routing FIB route max lifetime, Configuring the maximum lifetime for routes in the FIB
- IP routing IS-IS configuration, IS-IS configuration examples
- IP routing RIB label max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IP routing RIB route max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IPv6 BGP 6PE configuration, 6PE configuration example
- IS-IS basic configuration, Configuring basic IS-IS
- IS-IS basics configuration, Basic IS-IS configuration example
- IS-IS configuration, Configuring IS-IS
- IS-IS DIS election configuration, DIS election configuration example
- OSPF area configuration (NSSA), OSPF NSSA area configuration example)
- OSPF area configuration (stub), OSPF stub area configuration example
- OSPF basics configuration, Basic OSPF configuration example
- OSPF BFD configuration, BFD for OSPF configuration example
- OSPF configuration, Configuring OSPF, OSPF configuration task list, OSPF configuration examples
- OSPF DR election configuration, OSPF DR election configuration example
- OSPF FRR configuration, OSPF FRR configuration example
- OSPF GR configuration, OSPF GR configuration example
- OSPF route redistribution configuration, OSPF route redistribution configuration example
- OSPF route summarization configuration, OSPF route summarization configuration example
- OSPF virtual link configuration, OSPF virtual link configuration example
- routing policy ACLs, ACL
- routing policy configuration, Configuring routing policies, Routing policy configuration examples
- routing policy configuration (IPv4 route redistribution), Routing policy configuration example for IPv4 route redistribution
- routing policy IP prefix list, Configuring an IP prefix list
- routing policy prefix list, IP prefix list
- IPv4 BGP
- 4-byte AS number suppression, Enabling 4-byte AS number suppression
- 6PE, Configuring 6PE
- 6PE optional capabilities, Configuring optional 6PE capabilities
- AS number substitution, Configuring AS number substitution
- AS_PATH optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- basic configuration, Basic BGP configuration example
- BFD configuration, Configuring BFD for BGP, BFD for BGP configuration example
- COMMUNITY configuration, Configuring BGP community, BGP community configuration example
- confederation configuration, BGP confederation configuration example
- configuration, IPv4 BGP configuration examples
- default local preference, Configuring the default local preference
- default route advertisement to peer/peer group, Advertising a default route to a peer or peer group
- displaying, Displaying and maintaining BGP
- fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- FRR configuration, BGP FRR configuration example
- GR configuration, BGP GR configuration example
- holdtime, Configuring the keepalive interval and hold time
- IGP route redistribution, Redistributing IGP routes
- IP routing BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- keepalive interval, Configuring the keepalive interval and hold time
- load balancing, Configuring BGP load balancing
- load balancing configuration, BGP load balancing configuration example
- local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- local network injection, Injecting a local network
- maintaining, Displaying and maintaining BGP
- manual soft reset configuration, Configuring manual soft-reset
- MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- MED default value, Configuring the default MED value
- multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- NEXT_HOP attribute, Configuring the NEXT_HOP attribute
- ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- path selection configuration, BGP path selection configuration example
- peer MD5 authentication, Enabling MD5 authentication for BGP peers
- private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
- received route preferred value, Specifying a preferred value for routes received
- route dampening, Configuring BGP route dampening
- route distribution filtering policies, Configuring BGP route distribution filtering policies
- route preference configuration, Configuring preferences for BGP routes
- route reception filtering policies, Configuring BGP route reception filtering policies
- route reflector, Configuring a BGP route reflector
- route reflector configuration, BGP route reflector configuration example
- route refresh, Enabling route-refresh
- route summarization, BGP route summarization configuration example
- route summarization (automatic), Configuring automatic route summarization
- route summarization (manual), Configuring manual route summarization
- route update interval, Configuring the interval for sending updates for the same route
- route update save, Saving updates
- routes received from peer/peer group, Limiting routes received from a peer or peer group
- session establishment disable, Disabling BGP to establish a session to a peer or peer group
- IPv4 EBGP
- peer group, Configuring an EBGP peer group
- peer protection (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- IPv4 IBGP
- peer group, Configuring an IBGP peer group
- IPv6
- IP routing FIB route max lifetime, Configuring the maximum lifetime for routes in the FIB
- IP routing RIB label max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IP routing RIB route max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IS-IS. See
- OSPFv3 area parameter, Configuring OSPFv3 area parameters
- OSPFv3 BFD, Configuring BFD for OSPFv3
- OSPFv3 BFD configuration, BFD for OSPFv3 configuration example
- OSPFv3 configuration, Configuring OSPFv3, OSPFv3 configuration task list, OSPFv3 configuration examples
- OSPFv3 DD packet ignore MTU check, Ignoring MTU check for DD packets
- OSPFv3 DR election configuration, OSPFv3 DR election configuration example
- OSPFv3 ECMP route max, Configuring the maximum number of OSPFv3 ECMP routes
- OSPFv3 GR, Configuring OSPFv3 GR
- OSPFv3 GR configuration, OSPFv3 GR configuration example
- OSPFv3 GR helper, Configuring GR helper
- OSPFv3 GR restarter, Configuring GR restarter
- OSPFv3 Inter-Area-Prefix LSA filtering, Configuring Inter-Area-Prefix LSA filtering
- OSPFv3 interface cost, Configuring an OSPFv3 cost for an interface
- OSPFv3 interface DR priority, Configuring a DR priority for an interface
- OSPFv3 interface packet send/receive disable, Disabling interfaces from receiving and sending OSPFv3 packets
- OSPFv3 IPsec profile application, Applying an IPsec profile
- OSPFv3 IPsec profile configuration, OSPFv3 IPsec profile configuration example
- OSPFv3 LSA generation interval, Specifying the LSA generation interval
- OSPFv3 LSA transmission delay, Specifying LSA transmission delay
- OSPFv3 NBMA neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 neighbor state change logging, Enabling the logging of neighbor state changes
- OSPFv3 network optimization, Tuning and optimizing OSPFv3 networks
- OSPFv3 network tuning, Tuning and optimizing OSPFv3 networks
- OSPFv3 network type, Configuring OSPFv3 network types
- OSPFv3 network type (interface), Configuring the OSPFv3 network type for an interface
- OSPFv3 NSSA area, Configuring an NSSA area
- OSPFv3 NSSA area configuration, OSPFv3 NSSA area configuration example
- OSPFv3 P2MP neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 preference, Configuring a preference for OSPFv3
- OSPFv3 received route filtering, Configuring OSPFv3 received route filtering
- OSPFv3 route control, Configuring OSPFv3 route control
- OSPFv3 route redistribution, Configuring OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- OSPFv3 route summarization, Configuring OSPFv3 route summarization, OSPFv3 route summarization configuration example
- OSPFv3 SPF calculation interval, Specifying SPF calculation interval
- OSPFv3 stub area, Configuring a stub area
- OSPFv3 stub area configuration, OSPFv3 stub area configuration example
- OSPFv3 timer, Configuring OSPFv3 timers
- OSPFv3 virtual link, Configuring an OSPFv3 virtual link
- policy-based routing. See
- RIP, Configuring RIPng, See also
- routing policy ACLs, ACL
- routing policy configuration, Configuring routing policies, Routing policy configuration examples
- routing policy configuration (IPv6 route redistribution), Routing policy configuration example for IPv6 route redistribution
- routing policy IP prefix list, Configuring an IP prefix list
- routing policy prefix list, IP prefix list
- IPv6 BGP
- 4-byte AS number suppression, Enabling 4-byte AS number suppression
- 6PE configuration, 6PE configuration example
- AS number substitution, Configuring AS number substitution
- AS_PATH optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- basic configuration, IPv6 BGP basic configuration example
- BFD configuration, Configuring BFD for BGP, BFD for IPv6 BGP configuration example
- COMMUNITY configuration, Configuring BGP community
- configuration, IPv6 BGP configuration examples
- default local preference, Configuring the default local preference
- default route advertisement to peer/peer group, Advertising a default route to a peer or peer group
- displaying, Displaying and maintaining BGP
- fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- FRR configuration, IPv6 BGP FRR configuration example
- holdtime, Configuring the keepalive interval and hold time
- IGP route redistribution, Redistributing IGP routes
- IPsec configuration, Configuring IPsec for IPv6 BGP
- keepalive interval, Configuring the keepalive interval and hold time
- load balancing, Configuring BGP load balancing
- local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- local network injection, Injecting a local network
- maintaining, Displaying and maintaining BGP
- manual soft reset, Configuring manual soft-reset
- MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- MED default value, Configuring the default MED value
- multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- NEXT_HOP attribute, Configuring the NEXT_HOP attribute
- ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- packet IPsec, IPsec for IPv6 BGP packets configuration example
- peer MD5 authentication, Enabling MD5 authentication for BGP peers
- private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
- received route preferred value, Specifying a preferred value for routes received
- route dampening, Configuring BGP route dampening
- route distribution filtering policies, Configuring BGP route distribution filtering policies
- route preference, Configuring preferences for BGP routes
- route reception filtering policies, Configuring BGP route reception filtering policies
- route reflector, Configuring a BGP route reflector
- route reflector configuration, IPv6 BGP route reflector configuration example
- route refresh, Enabling route-refresh
- route update interval, Configuring the interval for sending updates for the same route
- route update save, Saving updates
- routes received from peer/peer group, Limiting routes received from a peer or peer group
- session establishment disable, Disabling BGP to establish a session to a peer or peer group
- IPv6 EBGP
- peer group, Configuring an EBGP peer group
- peer protection (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- IPv6 IBGP
- peer group, Configuring an IBGP peer group
- IPv6 IS-IS
- basic configuration, Configuring basic IPv6 IS-IS, IPv6 IS-IS basic configuration example
- BFD configuration, Configuring BFD for IPv6 IS-IS, BFD for IPv6 IS-IS configuration example
- configuration, Configuring IPv6 IS-IS, IPv6 IS-IS configuration examples
- display, Displaying and maintaining IPv6 IS-IS
- network optimization, Tuning and optimizing IPv6 IS-IS networks
- network tuning, Tuning and optimizing IPv6 IS-IS networks
- route control configuration, Configuring IPv6 IS-IS route control
- route convergence priority assignment, Assigning a convergence priority to IPv6 IS-IS routes
- IPv6 PBR
- apply clause, apply clause
- configuration, Configuring IPv6 PBR, IPv6 PBR configuration task list, Configuring IPv6 PBR, IPv6 PBR configuration examples
- display, Displaying and maintaining IPv6 PBR
- if-match clause, if-match clause
- interface configuration, Configuring IPv6 interface PBR
- interface configuration (packet type-based), Packet type-based IPv6 interface PBR configuration example
- interface PBR, Overview
- local configuration, Configuring IPv6 local PBR
- local configuration (packet type-based), Packet type-based IPv6 local PBR configuration example
- local PBR, Overview
- maintain, Displaying and maintaining IPv6 PBR
- match mode/node clause relationship, Relationship between the match mode and clauses on the node
- node action, Configuring actions for an IPv6 node
- node creation, Creating an IPv6 node
- node match criteria, Configuring match criteria for an IPv6 node
- policy, Policy
- policy configuration, Configuring an IPv6 policy
- Track collaboration, PBR and Track
- IPv6 provider edge. See
- IPv6 static routing
- basic configuration, Basic IPv6 static route configuration example
- BFD configuration, Configuring BFD for IPv6 static routes
- BFD configuration (direct next hop), BFD for IPv6 static routes configuration example (direct next hop)
- BFD configuration (indirect next hop), BFD for IPv6 static routes configuration example (indirect next hop)
- BFD control mode (direct next hop), Bidirectional control mode
- BFD control mode (indirect next hop), Bidirectional control mode
- BFD echo mode (single hop), Single-hop echo mode
- configuration, Configuring IPv6 static routing, IPv6 static routing configuration examples
- default route configuration, Configuring an IPv6 default route
- displaying, Displaying and maintaining IPv6 static routes
- route configuration, Configuring an IPv6 static route
- IS-IS
- address format, IS-IS address format
- area, IS-IS area
- area address, Area address
- authentication (area), Configuring area authentication
- authentication (neighbor relationship), Configuring neighbor relationship authentication
- authentication (routing domain), Configuring routing domain authentication
- authentication configuration, IS-IS authentication configuration example
- basic configuration, Configuring basic IS-IS, Basic IS-IS configuration example
- BFD configuration, Configuring BFD for IS-IS, BFD for IS-IS configuration example
- broadcast network type, IS-IS network types
- circuit level configuration, Configuring the IS level and circuit level
- configuration, Configuring IS-IS, IS-IS configuration task list, IS-IS configuration examples
- CSNP packet send interval, Specifying the interval for sending IS-IS CSNP packets
- default route advertisement, Advertising a default route
- DIS election, DIS and pseudonodes
- DIS election configuration, DIS election configuration example
- display, Displaying and maintaining IS-IS
- ECMP routes max, Configuring the maximum number of ECMP routes
- enable, Enabling IS-IS
- enabling automatic cost calculation, Enabling automatic IS-IS cost calculation
- FRR automatic backup next hop calculation, Configuring IS-IS FRR to automatically calculate a backup next hop
- FRR BFD configuration, Configuring BFD for IS-IS FRR
- FRR configuration, Configuring IS-IS FRR, IS-IS FRR configuration example
- global cost configuration, Configuring a global IS-IS cost
- GR configuration, Configuring IS-IS GR, IS-IS GR configuration example
- hello multiplier, Specifying the IS-IS hello multiplier
- hello packet send interval, Specifying the interval for sending IS-IS hello packets
- interface cost configuration, Configuring an IS-IS cost for an interface
- interface DIS priority, Configuring a DIS priority for an interface
- interface hello packet send enable, Enabling an interface to send small hello packets
- interface P2P network type configuration, Configuring P2P network type for an interface
- interface packet send/receive disable, Disabling an interface from sending/receiving IS-IS packets
- IPv6 IS-IS. See
- IS level configuration, Configuring the IS level and circuit level
- ISPF enable, Enabling IS-IS ISPF
- Level-1 router, IS-IS area
- Level-1-2 router, IS-IS area
- Level-2 router, IS-IS area
- link cost configuration, Configuring IS-IS link cost
- LSDB overload bit, Setting the LSDB overload bit
- LSP flash flooding, Enabling LSP flash flooding
- LSP fragment extension, Enabling LSP fragment extension
- LSP length specification, Specifying LSP lengths
- LSP parameter configuration, Configuring LSP parameters
- LSP timer configuration, Configuring LSP timers
- LSP-calculated route filtering, Filtering routes calculated from received LSPs
- maintain, Displaying and maintaining IS-IS
- neighbor state change logging, Enabling the logging of neighbor state changes
- NET, NET
- network management, Configuring IS-IS network management
- network optimization, Tuning and optimizing IS-IS networks
- network security enhancement, Enhancing IS-IS network security
- network tuning, Tuning and optimizing IS-IS networks
- nonstop routing (NSR) configuration, Configuring IS-IS NSR, IS-IS NSR configuration example
- NSAP address format, NSAP
- N-SEL, SEL
- PDU CLVs, CLV
- PDU hello type, Hello PDU
- PDU LSP type, LSP
- PDU SNP type, SNP
- PDU types, IS-IS PDUs
- point-to-point network type, IS-IS network types
- PPP interface hello packet source address check, Enabling source address check for hello packets on a PPP interface
- preference specification, Specifying a preference for IS-IS
- protocols and standards, Protocols and standards
- pseudonode, DIS and pseudonodes
- redistributed route filtering, Filtering redistributed routes
- route control configuration, Configuring IS-IS route control
- route convergence priority, Configuring convergence priorities for specific routes
- route filtering, Configuring IS-IS route filtering
- route leaking, Route leaking
- route leaking configuration, Configuring IS-IS route leaking
- route redistribution, Configuring IS-IS route redistribution, IS-IS route redistribution configuration example
- route summarization, Configuring IS-IS route summarization
- routing method, Routing method
- SPF calculation interval, Controlling SPF calculation interval
- system ID, System ID
- system ID > host name mapping, Configuring system ID to host name mappings
- terminology, Terminology
- ISPF
- OSPF ISPF, Enabling OSPF ISPF
L
- label
- IP routing RIB label max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- leaking
- IS-IS routes, Configuring IS-IS route leaking
- level
- IPv4 EBGP peer protection (level 2 threshold exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- IPv6 EBGP peer protection (level 2 threshold exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- limiting
- IPv4 BGP routes received from peer/peer group, Limiting routes received from a peer or peer group
- IPv6 BGP routes received from peer/peer group, Limiting routes received from a peer or peer group
- link
- IP routing EBGP direct connection after link failure, Enabling immediate re-establishment of direct EBGP connections upon link failure
- IPv4 BGP BFD, Configuring BFD for BGP
- IPv6 BGP BFD, Configuring BFD for BGP
- IS-IS automatic cost calculation, Enabling automatic IS-IS cost calculation
- IS-IS global cost, Configuring a global IS-IS cost
- IS-IS interface cost, Configuring an IS-IS cost for an interface
- IS-IS link cost, Configuring IS-IS link cost
- IS-IS NSR, Configuring IS-IS NSR
- OSPF basics configuration, Basic OSPF configuration example
- OSPF BFD configuration, Configuring BFD for OSPF
- OSPF configuration, Configuring OSPF, OSPF configuration task list, OSPF configuration examples
- OSPF FRR configuration, Configuring OSPF FRR
- OSPF virtual link, Backbone area and virtual links, Configuring a virtual link
- OSPF virtual link configuration, OSPF virtual link configuration example
- OSPFv3 virtual link, Configuring an OSPFv3 virtual link
- list
- routing policy AS_PATH list, AS path list, Configuring an AS path list
- routing policy COMMUNITY list, Community list, Configuring a community list
- routing policy extended community list, Extended community list, Configuring an extended community list
- routing policy IP prefix list, Configuring an IP prefix list
- routing policy prefix list, IP prefix list
- load balancing, BGP load balancing, See also
- IP routing BGP, BGP load balancing
- IP routing ECMP enhanced mode, Enabling the enhanced ECMP mode
- IP routing ECMP route max number, Configuring the maximum number of ECMP routes
- IPv4 BGP, Configuring BGP load balancing
- IPv4 BGP load balancing, BGP load balancing configuration example
- IPv6 BGP, Configuring BGP load balancing
- OSPF ECMP route max, Configuring the maximum number of ECMP routes
- OSPFv3 ECMP route max, Configuring the maximum number of OSPFv3 ECMP routes
- RIPng ECMP route max, Configuring the maximum number of ECMP routes
- load sharing
- IP routing load sharing, Load sharing
- IS-IS ECMP routes max, Configuring the maximum number of ECMP routes
- RIP ECMP route max number, Configuring the maximum number of ECMP routes
- local
- IP routing BGP LOCAL_PREF path attribute, BGP path attributes
- IPv4 BGP default local preference, Configuring the default local preference
- IPv6 BGP default local preference, Configuring the default local preference
- IPv6 PBR local configuration, Configuring IPv6 local PBR
- IPv6 PBR local configuration (packet type-based), Packet type-based IPv6 local PBR configuration example
- PBR configuration (local), Configuring local PBR
- PBR configuration (local/packet type-based), Packet type-based local PBR configuration example
- logging
- IP routing BGP route flapping logging, Enabling logging for BGP route flapping
- IP routing BGP session state change logging, Enabling logging of session state changes
- IS-IS neighbor state change, Enabling the logging of neighbor state changes
- OSPF log count, Configuring the number of OSPF logs
- OSPF neighbor state change, Logging neighbor state changes
- OSPFv3 neighbor state change logging, Enabling the logging of neighbor state changes
- loop
- IP routing BGP FRR, Configuring BGP FRR
- RIP routing loop prevention, Routing loop prevention
- LSA
- OSPF AS External LSA, LSA types
- OSPF ASBR summary LSA, LSA types
- OSPF exit overflow interval, Configuring OSPF exit overflow interval
- OSPF LSA arrival interval, Specifying the LSA arrival interval
- OSPF LSA generation interval, Specifying the LSA generation interval
- OSPF LSA retransmission packet timer, Configuring OSPF timers
- OSPF LSA transmission delay, Specifying LSA transmission delay
- OSPF LSDB external LSAs max number, Configuring the maximum number of external LSAs in LSDB
- OSPF network LSA, LSA types
- OSPF network summary LSA, LSA types
- OSPF NSSA LSA, LSA types
- OSPF opaque LSA, LSA types
- OSPF router LSA, LSA types
- OSPF Type-3 LSA filtering, Configuring Type-3 LSA filtering
- OSPFv3 AS external LSA, OSPFv3 LSA types
- OSPFv3 grace LSA, OSPFv3 LSA types
- OSPFv3 inter-area-prefix LSA, OSPFv3 LSA types
- OSPFv3 Inter-Area-Prefix LSA filtering, Configuring Inter-Area-Prefix LSA filtering
- OSPFv3 inter-area-router LSA, OSPFv3 LSA types
- OSPFv3 intra-area-prefix LSA, OSPFv3 LSA types
- OSPFv3 link LSA, OSPFv3 LSA types
- OSPFv3 LSA generation interval, Specifying the LSA generation interval
- OSPFv3 LSA transmission delay, Specifying LSA transmission delay
- OSPFv3 network LSA, OSPFv3 LSA types
- OSPFv3 NSSA LSA, OSPFv3 LSA types
- OSPFv3 router LSA, OSPFv3 LSA types
- LSAck
- OSPF LSAck packet, OSPF packets
- OSPFv3 packet type, OSPFv3 packets
- LSDB
- IS-IS LSDB overload bit, Setting the LSDB overload bit
- OSPF LSDB external LSAs max number, Configuring the maximum number of external LSAs in LSDB
- LSP
- IS-IS LSP flash flooding, Enabling LSP flash flooding
- IS-IS LSP fragment extension, Enabling LSP fragment extension
- IS-IS LSP length, Specifying LSP lengths
- IS-IS LSP parameters, Configuring LSP parameters
- IS-IS LSP timers, Configuring LSP timers
- IS-IS PDU type, LSP
- IS-IS route summarization, Configuring IS-IS route summarization
- LSR
- OSPF LSR packet, OSPF packets
- OSPFv3 packet type, OSPFv3 packets
- LSU
- OSPF LSU packet, OSPF packets
- OSPF LSU transmit rate, Configuring the LSU transmit rate
- OSPFv3 LSU transmit rate, Configuring the LSU transmit rate
- OSPFv3 packet type, OSPFv3 packets
M
- maintaining
- IP routing BGP, Displaying and maintaining BGP
- IP routing table, Displaying and maintaining a routing table
- IPv4 BGP, Displaying and maintaining BGP
- IPv6 BGP, Displaying and maintaining BGP
- IPv6 PBR, Displaying and maintaining IPv6 PBR
- IS-IS, Displaying and maintaining IS-IS
- OSPF, Displaying and maintaining OSPF
- OSPFv3, Displaying and maintaining OSPFv3
- PBR, Displaying and maintaining PBR
- RIP, Displaying and maintaining RIP
- RIPng, Displaying and maintaining RIPng
- routing policy, Displaying and maintaining the routing policy
- managing
- IP routing BGP large scale network management, Settlements for problems in large-scale BGP networks
- manual
- IPv4 BGP route summarization (manual), Configuring manual route summarization
- mapping
- IS-IS system ID > host name mapping, Configuring system ID to host name mappings
- IS-IS system ID > host name mapping (dynamic), Configuring dynamic system ID to host name mapping
- IS-IS system ID > host name mapping (static), Configuring a static system ID to host name mapping
- matching
- IPv6 PBR if-match clause, if-match clause
- IPv6 PBR node action, Configuring actions for an IPv6 node
- IPv6 PBR node match criteria, Configuring match criteria for an IPv6 node
- PBR deny match mode, Policy
- PBR if-match clause, Policy
- PBR node match criteria, Configuring match criteria for a node
- PBR permit match mode, Policy
- routing policy if-match clause, Routing policy, Configuring if-match clauses
- MD5
- IPv4 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- IPv6 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- MED
- IP routing BGP MED attribute, Configuring the MED attribute
- IP routing BGP path attribute, BGP path attributes
- IPv4 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv4 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv4 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv4 BGP MED default value, Configuring the default MED value
- IPv6 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv6 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv6 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv6 BGP MED default value, Configuring the default MED value
- memory
- IPv4 EBGP peer protection (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- IPv6 EBGP peer protection (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- message
- IP routing BGP notification, BGP message types
- IP routing BGP open, BGP message types
- IP routing BGP route-refresh, BGP message types
- IP routing BGP update, BGP message types
- RIPv1 message zero field check enable, Enabling zero field check on incoming RIPv1 messages
- RIPv2 message authentication configuration, Configuring RIPv2 message authentication
- metric
- IP routing RIP interface additional metric, RIP interface additional metric configuration example
- RIP additional routing metric configuration, Configuring an additional routing metric
- RIPng routing metric configuration, Configuring an additional routing metric
- mode
- IP routing ECMP enhanced, Enabling the enhanced ECMP mode
- IPv6 static route BFD control (direct next hop), Bidirectional control mode
- IPv6 static route BFD control (indirect next hop), Bidirectional control mode
- IPv6 static route BFD echo (single hop), Single-hop echo mode
- PBR deny match, Policy
- PBR permit match, Policy
- static routing BFD bidirectional control mode (direct next hop), Bidirectional control mode
- static routing BFD bidirectional control mode (indirect next hop), Bidirectional control mode
- static routing BFD single-hop echo mode, Single-hop echo mode
- MP_REACH_NLRI (MP-BGP), MP-BGP extended attributes
- MP_UNREACH_NLRI (MP-BGP), MP-BGP extended attributes
- MP-BGP, Configuring BGP, See also
- address family, Address family
- extended attributes, MP-BGP extended attributes
- IP routing BGP configuration, Configuring BGP, BGP configuration task list
- IPv4 BGP basics, Basic BGP configuration example
- IPv4 BGP BFD, BFD for BGP configuration example
- IPv4 BGP COMMUNITY, BGP community configuration example
- IPv4 BGP confederation, BGP confederation configuration example
- IPv4 BGP configuration, IPv4 BGP configuration examples
- IPv4 BGP FRR, BGP FRR configuration example
- IPv4 BGP GR, BGP GR configuration example
- IPv4 BGP load balancing, BGP load balancing configuration example
- IPv4 BGP path selection, BGP path selection configuration example
- IPv4 BGP route reflector, BGP route reflector configuration example
- IPv4 BGP route summarization, BGP route summarization configuration example
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IPv6 BGP basics, IPv6 BGP basic configuration example
- IPv6 BGP BFD, BFD for IPv6 BGP configuration example
- IPv6 BGP configuration, IPv6 BGP configuration examples
- IPv6 BGP FRR, IPv6 BGP FRR configuration example
- IPv6 BGP route reflector, IPv6 BGP route reflector configuration example
- overview, MP-BGP
- protocols and standards, Protocols and standards
- MPLS
- IP routing BGP 6PE, Configuring 6PE
- IP routing BGP 6PE basics, Configuring basic 6PE
- IP routing BGP 6PE optional capabilities, Configuring optional 6PE capabilities
- IPv6 BGP 6PE, 6PE configuration example
- routing policy extended community list, Extended community list
- MPU
- OSPF NSR, Configuring OSPF NSR
- OSPFv3 NSR, Configuring OSPFv3 NSR
- OSPFv3 NSR configuration, OSPFv3 NSR configuration example
- MTU
- OSPF DD packet interface MTU, Adding the interface MTU into DD packets
- OSPFv3 DD packet ignore MTU check, Ignoring MTU check for DD packets
- multicast
- BGP dynamic peer, Configuring dynamic BGP peers
- IP routing BGP peer, Configuring a BGP peer
- OSPF network type, OSPF network types
- RIPng basic configuration, Configuring basic RIPng
- RIPng configuration, Configuring RIPng, RIPng configuration task list
- Multiprotocol Extensions for BGP-4. See
N
- naming
- IS-IS system ID > host name mapping, Configuring system ID to host name mappings
- NBMA
- OSPF interface network type, Configuring the NBMA network type for an interface
- OSPF network type, OSPF network types, Configuring OSPF network types
- OSPFv3 NBMA neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 network type, Configuring OSPFv3 network types
- OSPFv3 network type (interface), Configuring the OSPFv3 network type for an interface
- ND
- OSPFv3 BFD configuration, BFD for OSPFv3 configuration example
- OSPFv3 configuration, Configuring OSPFv3, OSPFv3 configuration task list, OSPFv3 configuration examples
- OSPFv3 DR election configuration, OSPFv3 DR election configuration example
- OSPFv3 GR configuration, OSPFv3 GR configuration example
- OSPFv3 IPsec profile configuration, OSPFv3 IPsec profile configuration example
- OSPFv3 NBMA neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 neighbor state change logging, Enabling the logging of neighbor state changes
- OSPFv3 NSSA area configuration, OSPFv3 NSSA area configuration example
- OSPFv3 P2MP neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 route control, Configuring OSPFv3 route control
- OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- OSPFv3 stub area configuration, OSPFv3 stub area configuration example
- neighbor
- IPv4 BGP BFD, Configuring BFD for BGP
- IPv6 BGP BFD, Configuring BFD for BGP
- IS-IS authentication (neighbor relationship), Configuring neighbor relationship authentication
- IS-IS neighbor state change logging, Enabling the logging of neighbor state changes
- OSPF neighbor state change logging, Logging neighbor state changes
- RIP neighbor specification, Specifying a RIP neighbor
- network
- BGP dynamic peer, Configuring dynamic BGP peers
- BGP update sending delay, Configuring BGP update sending delay
- entity title. Use NET
- IP routing BGP 6PE, Configuring 6PE
- IP routing BGP 6PE basics, Configuring basic 6PE
- IP routing BGP 6PE optional capabilities, Configuring optional 6PE capabilities
- IP routing BGP AS_PATH attribute, Configuring the AS_PATH attribute
- IP routing BGP basics, Configuring basic BGP
- IP routing BGP community, Settlements for problems in large-scale BGP networks
- IP routing BGP confederation, Settlements for problems in large-scale BGP networks, Configuring a BGP confederation
- IP routing BGP default route advertisement to peer/peer group, Advertising a default route to a peer or peer group
- IP routing BGP FRR, Configuring BGP FRR
- IP routing BGP GR, Configuring BGP GR
- IP routing BGP GR helper, Configuring BGP GR
- IP routing BGP GR restarter, Configuring BGP GR
- IP routing BGP GTSM configuration, Configuring GTSM for BGP
- IP routing BGP large-scale network, Configuring a large-scale BGP network
- IP routing BGP load balancing, BGP load balancing
- IP routing BGP MED attribute, Configuring the MED attribute
- IP routing BGP NSR, Configuring BGP NSR
- IP routing BGP optimal route advertisement, Advertising optimal routes in the IP routing table
- IP routing BGP optimization, Tuning and optimizing BGP networks
- IP routing BGP path selection, Controlling BGP path selection
- IP routing BGP peer, Configuring a BGP peer
- IP routing BGP peer group, Settlements for problems in large-scale BGP networks, Configuring a BGP peer group
- IP routing BGP route dampening, Settlements for problems in large-scale BGP networks
- IP routing BGP route distribution, Controlling route distribution and reception
- IP routing BGP route filtering policies, Configuring BGP route filtering policies
- IP routing BGP route flapping logging, Enabling logging for BGP route flapping
- IP routing BGP route generation, Generating BGP routes
- IP routing BGP route reception, Controlling route distribution and reception
- IP routing BGP route recursion, BGP load balancing
- IP routing BGP route reflection, Configuring BGP route reflection
- IP routing BGP route reflector, Settlements for problems in large-scale BGP networks
- IP routing BGP route selection, BGP route selection, BGP load balancing
- IP routing BGP route summarization, Settlements for problems in large-scale BGP networks, Configuring BGP route summarization
- IP routing BGP session state change logging, Enabling logging of session state changes
- IP routing BGP SNMP notification enable, Enabling SNMP notifications for BGP
- IP routing BGP soft reset, Configuring BGP soft-reset
- IP routing BGP TCP connection source address, Specifying the source address of TCP connections
- IP routing dynamic routing protocols, Dynamic routing protocols
- IP routing ECMP enhanced mode, Enabling the enhanced ECMP mode
- IP routing ECMP route max number, Configuring the maximum number of ECMP routes
- IP routing extension attribute redistribution, Extension attribute redistribution
- IP routing FIB route max lifetime, Configuring the maximum lifetime for routes in the FIB
- IP routing IS-IS circuit level, Configuring the IS level and circuit level
- IP routing IS-IS IS level, Configuring the IS level and circuit level
- IP routing load sharing, Load sharing
- IP routing MP-BGP, MP-BGP
- IP routing RIB label max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IP routing RIB route max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IP routing RIP basics, Basic RIP configuration example
- IP routing RIP BFD (bidirectional detection/control packet mode), BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- IP routing RIP BFD (single-hop echo detection), BFD for RIP configuration example (single-hop echo detection for a directly connected neighbor)
- IP routing RIP BFD (single-hop echo detection/specific destination), BFD for RIP configuration example (single hop echo detection for a specific destination)
- IP routing RIP FRR, RIP FRR configuration example
- IP routing RIP interface additional metric, RIP interface additional metric configuration example
- IP routing RIP route redistribution, RIP route redistribution configuration example
- IP routing RIP summary route advertisement, RIP summary route advertisement configuration example
- IP routing route backup, Route backup
- IP routing route preference, Route preference
- IP routing route recursion, Route recursion
- IP routing route redistribution, Route redistribution
- IP routing support for IPv6 routes with prefixes longer than 64 bits, Enabling support for IPv6 routes with prefixes longer than 64 bits
- IPv4 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- IPv4 BGP AS number substitution, Configuring AS number substitution
- IPv4 BGP AS_PATH optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- IPv4 BGP BFD configuration, Configuring BFD for BGP
- IPv4 BGP community, Configuring BGP community
- IPv4 BGP default local preference, Configuring the default local preference
- IPv4 BGP fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- IPv4 BGP holdtime, Configuring the keepalive interval and hold time
- IPv4 BGP IGP route redistribution, Redistributing IGP routes
- IPv4 BGP keepalive interval, Configuring the keepalive interval and hold time
- IPv4 BGP load balancing, Configuring BGP load balancing
- IPv4 BGP local network injection, Injecting a local network
- IPv4 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- IPv4 BGP NEXT_HOP attribute, Configuring the NEXT_HOP attribute
- IPv4 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- IPv4 BGP private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
- IPv4 BGP received route preferred value, Specifying a preferred value for routes received
- IPv4 BGP route dampening, Configuring BGP route dampening
- IPv4 BGP route preference, Configuring preferences for BGP routes
- IPv4 BGP route update interval, Configuring the interval for sending updates for the same route
- IPv4 BGP routes received from peer/peer group, Limiting routes received from a peer or peer group
- IPv4 BGP session establishment disable, Disabling BGP to establish a session to a peer or peer group
- IPv6 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- IPv6 BGP AS number substitution, Configuring AS number substitution
- IPv6 BGP AS_PATH optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- IPv6 BGP BFD, Configuring BFD for BGP
- IPv6 BGP COMMUNITY, Configuring BGP community
- IPv6 BGP default local preference, Configuring the default local preference
- IPv6 BGP fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- IPv6 BGP holdtime, Configuring the keepalive interval and hold time
- IPv6 BGP IGP route redistribution, Redistributing IGP routes
- IPv6 BGP IPsec, Configuring IPsec for IPv6 BGP
- IPv6 BGP keepalive interval, Configuring the keepalive interval and hold time
- IPv6 BGP load balancing, Configuring BGP load balancing
- IPv6 BGP local network injection, Injecting a local network
- IPv6 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- IPv6 BGP NEXT_HOP attribute, Configuring the NEXT_HOP attribute
- IPv6 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- IPv6 BGP private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
- IPv6 BGP received route preferred value, Specifying a preferred value for routes received
- IPv6 BGP route dampening, Configuring BGP route dampening
- IPv6 BGP route preference, Configuring preferences for BGP routes
- IPv6 BGP route update interval, Configuring the interval for sending updates for the same route
- IPv6 BGP routes received from peer/peer group, Limiting routes received from a peer or peer group
- IPv6 BGP session establishment disable, Disabling BGP to establish a session to a peer or peer group
- IPv6 IS-IS basic configuration, Configuring basic IPv6 IS-IS
- IPv6 IS-IS BFD configuration, Configuring BFD for IPv6 IS-IS
- IPv6 IS-IS network optimization, Tuning and optimizing IPv6 IS-IS networks
- IPv6 IS-IS network tuning, Tuning and optimizing IPv6 IS-IS networks
- IPv6 IS-IS route control, Configuring IPv6 IS-IS route control
- IPv6 IS-IS route convergence priority, Assigning a convergence priority to IPv6 IS-IS routes
- IPv6 PBR configuration, Configuring IPv6 PBR
- IPv6 PBR interface configuration, Configuring IPv6 interface PBR
- IPv6 PBR local configuration, Configuring IPv6 local PBR
- IPv6 PBR node action, Configuring actions for an IPv6 node
- IPv6 PBR node creation, Creating an IPv6 node
- IPv6 PBR node match criteria, Configuring match criteria for an IPv6 node
- IPv6 PBR policy configuration, Configuring an IPv6 policy
- IPv6 PBR-Track collaboration, PBR and Track
- IPv6 static route BFD configuration, Configuring BFD for IPv6 static routes
- IPv6 static route BFD control mode (direct next hop), Bidirectional control mode
- IPv6 static route BFD control mode (indirect next hop), Bidirectional control mode
- IPv6 static route BFD echo mode (single hop), Single-hop echo mode
- IPv6 static route configuration, Configuring an IPv6 static route
- IS-IS area, IS-IS area
- IS-IS authentication, IS-IS authentication configuration example
- IS-IS authentication (area), Configuring area authentication
- IS-IS authentication (neighbor relationship), Configuring neighbor relationship authentication
- IS-IS authentication (routing domain), Configuring routing domain authentication
- IS-IS automatic cost calculation, Enabling automatic IS-IS cost calculation
- IS-IS basic configuration, Configuring basic IS-IS
- IS-IS basics configuration, Basic IS-IS configuration example
- IS-IS BFD, Configuring BFD for IS-IS
- IS-IS BFD configuration, BFD for IS-IS configuration example
- IS-IS broadcast type, IS-IS network types
- IS-IS DIS election, DIS and pseudonodes
- IS-IS DIS election configuration, DIS election configuration example
- IS-IS FRR, Configuring IS-IS FRR
- IS-IS FRR configuration, IS-IS FRR configuration example
- IS-IS global cost, Configuring a global IS-IS cost
- IS-IS GR, Configuring IS-IS GR
- IS-IS GR configuration, IS-IS GR configuration example
- IS-IS hello multiplier, Specifying the IS-IS hello multiplier
- IS-IS hello packet send interval, Specifying the interval for sending IS-IS hello packets
- IS-IS interface cost, Configuring an IS-IS cost for an interface
- IS-IS interface DIS priority, Configuring a DIS priority for an interface
- IS-IS interface hello packet send, Enabling an interface to send small hello packets
- IS-IS interface P2P network type, Configuring P2P network type for an interface
- IS-IS interface packet send/receive, Disabling an interface from sending/receiving IS-IS packets
- IS-IS ISPF, Enabling IS-IS ISPF
- IS-IS link cost, Configuring IS-IS link cost
- IS-IS LSDB overload bit, Setting the LSDB overload bit
- IS-IS LSP flash flooding, Enabling LSP flash flooding
- IS-IS LSP fragment extension, Enabling LSP fragment extension
- IS-IS LSP length, Specifying LSP lengths
- IS-IS LSP parameters, Configuring LSP parameters
- IS-IS LSP timer, Configuring LSP timers
- IS-IS neighbor state change logging, Enabling the logging of neighbor state changes
- IS-IS network management, Configuring IS-IS network management
- IS-IS network optimization, Tuning and optimizing IS-IS networks
- IS-IS network tuning, Tuning and optimizing IS-IS networks
- IS-IS NSR, Configuring IS-IS NSR
- IS-IS NSR configuration, IS-IS NSR configuration example
- IS-IS point-to-point type, IS-IS network types
- IS-IS preference, Specifying a preference for IS-IS
- IS-IS pseudonode, DIS and pseudonodes
- IS-IS route control, Configuring IS-IS route control
- IS-IS route convergence priority, Configuring convergence priorities for specific routes
- IS-IS route leaking, Route leaking
- IS-IS route redistribution, IS-IS route redistribution configuration example
- IS-IS routing domain, IS-IS area
- IS-IS security enhancement, Enhancing IS-IS network security
- IS-IS SPF calculation interval, Controlling SPF calculation interval
- IS-IS system ID > host name mapping, Configuring system ID to host name mappings
- OSPF area, Configuring OSPF areas
- OSPF area configuration (NSSA), Configuring an NSSA area, OSPF NSSA area configuration example)
- OSPF area configuration (stub), Configuring a stub area, OSPF stub area configuration example
- OSPF BFD configuration, Configuring BFD for OSPF
- OSPF BFD detection configuration (bidirectional control), Configuring bidirectional control detection
- OSPF BFD detection configuration (single-hop echo), Configuring single-hop echo detection
- OSPF DD packet interface MTU, Adding the interface MTU into DD packets
- OSPF discard route configuration, Configuring discard routes for summary networks
- OSPF ECMP route max, Configuring the maximum number of ECMP routes
- OSPF enable, Enabling OSPF
- OSPF exit overflow interval, Configuring OSPF exit overflow interval
- OSPF FRR configuration, Configuring OSPF FRR
- OSPF GR, Configuring OSPF GR
- OSPF GR helper, Configuring OSPF GR helper
- OSPF GR restarter, Configuring OSPF GR restarter
- OSPF host route advertisement, Advertising a host route
- OSPF interface cost, Configuring an OSPF cost for an interface
- OSPF interface network type (broadcast), Configuring the broadcast network type for an interface
- OSPF interface network type (NBMA), Configuring the NBMA network type for an interface
- OSPF interface network type (P2MP), Configuring the P2MP network type for an interface
- OSPF interface network type (P2P), Configuring the P2P network type for an interface
- OSPF interface packet send/receive disable, Disabling interfaces from receiving and sending OSPF packets
- OSPF ISPF, Enabling OSPF ISPF
- OSPF log count, Configuring the number of OSPF logs
- OSPF LSA arrival interval, Specifying the LSA arrival interval
- OSPF LSA generation interval, Specifying the LSA generation interval
- OSPF LSA transmission delay, Specifying LSA transmission delay
- OSPF LSDB external LSAs max number, Configuring the maximum number of external LSAs in LSDB
- OSPF LSU transmit rate, Configuring the LSU transmit rate
- OSPF neighbor state change logging, Logging neighbor state changes
- OSPF network LSA, LSA types
- OSPF network management, Configuring OSPF network management
- OSPF network summary LSA, LSA types
- OSPF network type, Configuring OSPF network types
- OSPF NSR, Configuring OSPF NSR
- OSPF optimization, Tuning and optimizing OSPF networks
- OSPF packet DSCP value, Configuring a DSCP value for OSPF packets
- OSPF PIC configuration, Configuring OSPF PIC
- OSPF preference, Configuring OSPF preference
- OSPF prefix prioritization, Configuring prefix prioritization
- OSPF prefix suppression, Configuring prefix suppression
- OSPF received route filtering, Configuring received OSPF route filtering
- OSPF RFC 1583 compatibility, Enabling compatibility with RFC 1583
- OSPF route calculation, Route calculation
- OSPF route control, Configuring OSPF route control
- OSPF route redistribution, Configuring OSPF route redistribution
- OSPF route summarization, Configuring OSPF route summarization
- OSPF route types, Route types
- OSPF SPF calculation interval, Specifying SPF calculation interval
- OSPF stub router, Configuring stub routers
- OSPF timer configuration, Configuring OSPF timers
- OSPF tuning, Tuning and optimizing OSPF networks
- OSPF Type-3 LSA filtering, Configuring Type-3 LSA filtering
- OSPF virtual link, Configuring a virtual link
- OSPFv3 area parameter, Configuring OSPFv3 area parameters
- OSPFv3 BFD, Configuring BFD for OSPFv3
- OSPFv3 DD packet ignore MTU check, Ignoring MTU check for DD packets
- OSPFv3 ECMP route max, Configuring the maximum number of OSPFv3 ECMP routes
- OSPFv3 enable, Enabling OSPFv3
- OSPFv3 GR, Configuring OSPFv3 GR
- OSPFv3 GR helper, Configuring GR helper
- OSPFv3 GR restarter, Configuring GR restarter
- OSPFv3 Inter-Area-Prefix LSA filtering, Configuring Inter-Area-Prefix LSA filtering
- OSPFv3 interface cost, Configuring an OSPFv3 cost for an interface
- OSPFv3 interface DR priority, Configuring a DR priority for an interface
- OSPFv3 interface packet send/receive disable, Disabling interfaces from receiving and sending OSPFv3 packets
- OSPFv3 IPsec profile application, Applying an IPsec profile
- OSPFv3 LSA generation interval, Specifying the LSA generation interval
- OSPFv3 LSA transmission delay, Specifying LSA transmission delay
- OSPFv3 LSU transmit rate, Configuring the LSU transmit rate
- OSPFv3 NBMA neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 neighbor state change logging, Enabling the logging of neighbor state changes
- OSPFv3 network management, Configuring OSPFv3 network management
- OSPFv3 network type, Configuring OSPFv3 network types
- OSPFv3 network type (interface), Configuring the OSPFv3 network type for an interface
- OSPFv3 NSR, Configuring OSPFv3 NSR
- OSPFv3 NSSA area, Configuring an NSSA area
- OSPFv3 P2MP neighbor, Configuring an NBMA or P2MP neighbor
- OSPFv3 preference, Configuring a preference for OSPFv3
- OSPFv3 prefix suppression, Configuring prefix suppression
- OSPFv3 received route filtering, Configuring OSPFv3 received route filtering
- OSPFv3 redistributed route summarization (ASBR), Configuring route summarization on an ASBR
- OSPFv3 route control, Configuring OSPFv3 route control
- OSPFv3 route redistribution, Configuring OSPFv3 route redistribution
- OSPFv3 route summarization, Configuring OSPFv3 route summarization
- OSPFv3 route summarization (ABR), Configuring route summarization on an ABR
- OSPFv3 SPF calculation interval, Specifying SPF calculation interval
- OSPFv3 stub area, Configuring a stub area
- OSPFv3 stub router, Configuring stub routers
- OSPFv3 timer, Configuring OSPFv3 timers
- OSPFv3 virtual link, Configuring an OSPFv3 virtual link
- PBR node action, Configuring actions for a node
- PBR node creation, Creating a node
- PBR node match criteria, Configuring match criteria for a node
- PBR policy, Policy
- PBR policy configuration, Configuring a policy
- PBR-Track collaboration, PBR and Track
- RIP additional routing metric configuration, Configuring an additional routing metric
- RIP basic configuration, Configuring basic RIP
- RIP BFD configuration, Configuring BFD for RIP
- RIP default route advertisement, Advertising a default route
- RIP ECMP route max number, Configuring the maximum number of ECMP routes
- RIP FRR configuration, Configuring RIP FRR
- RIP GR configuration, Configuring RIP GR
- RIP host route reception disable, Disabling host route reception
- RIP interface advertisement control, Controlling RIP reception and advertisement on interfaces
- RIP interface reception control, Controlling RIP reception and advertisement on interfaces
- RIP network management configuration, Configuring RIP network management
- RIP network optimization, Tuning and optimizing RIP networks
- RIP network tuning, Tuning and optimizing RIP networks
- RIP operation, RIP operation
- RIP packet max length, Setting the maximum length of RIP packets
- RIP packet send rate configuration, Configuring the RIP packet sending rate
- RIP poison reverse configuration, Enabling split horizon and poison reverse
- RIP preference configuration, Configuring a preference for RIP
- RIP received/redistributed route filtering, Configuring received/redistributed route filtering
- RIP route control configuration, Configuring RIP route control
- RIP route entries, RIP route entries
- RIP route redistribution configuration, Configuring RIP route redistribution
- RIP routing loop prevention, Routing loop prevention
- RIP split horizon configuration, Enabling split horizon and poison reverse
- RIP timer configuration, Configuring RIP timers
- RIP update source IP address check, Enabling source IP address check on incoming RIP updates
- RIP version configuration, Configuring a RIP version
- RIP versions, RIP versions
- RIPng basic configuration, Configuring basic RIPng
- RIPng default route advertisement, Advertising a default route
- RIPng ECMP route max, Configuring the maximum number of ECMP routes
- RIPng GR configuration, Configuring RIPng GR
- RIPng IPsec profile application, Applying an IPsec profile
- RIPng network optimization, Tuning and optimizing the RIPng network
- RIPng network tuning, Tuning and optimizing the RIPng network
- RIPng packet, RIPng packets
- RIPng packet zero field check, Configuring zero field check on RIPng packets
- RIPng poison reverse, Configuring split horizon and poison reverse
- RIPng preference, Configuring a preference for RIPng
- RIPng received/redistributed route filtering, Configuring received/redistributed route filtering
- RIPng route control, Configuring RIPng route control
- RIPng route entry, RIPng route entries
- RIPng route redistribution, Configuring RIPng route redistribution
- RIPng route summarization, Configuring RIPng route summarization
- RIPng routing metric configuration, Configuring an additional routing metric
- RIPng split horizon, Configuring split horizon and poison reverse
- RIPng timer configuration, Configuring RIPng timers
- RIPv1 message zero field check, Enabling zero field check on incoming RIPv1 messages
- RIPv2 message authentication configuration, Configuring RIPv2 message authentication
- RIPv2 route summarization configuration, Configuring RIPv2 route summarization
- routing policy apply clause, Configuring apply clauses
- routing policy AS_PATH list, Configuring an AS path list
- routing policy COMMUNITY list, Configuring a community list
- routing policy configuration, Configuring a routing policy
- routing policy configuration (IPv4 route redistribution), Routing policy configuration example for IPv4 route redistribution
- routing policy configuration (IPv6 route redistribution), Routing policy configuration example for IPv6 route redistribution
- routing policy continue clause, Configuring the continue clause
- routing policy creation, Creating a routing policy
- routing policy extended community list, Configuring an extended community list
- routing policy filter configuration, Configuring filters
- routing policy if-match clause, Configuring if-match clauses
- routing policy IP prefix list, Configuring an IP prefix list
- static routing BFD bidirectional control mode (direct next hop), Bidirectional control mode
- static routing BFD bidirectional control mode (indirect next hop), Bidirectional control mode
- static routing BFD configuration, Configuring BFD for static routes
- static routing BFD single-hop echo mode, Single-hop echo mode
- static routing configuration, Configuring a static route
- static routing FRR configuration, Configuring static route FRR
- tuning BGP, Tuning and optimizing BGP networks
- network management
- IP routing BGP configuration, Configuring BGP, BGP configuration task list
- IP routing BGP large scale networks, Settlements for problems in large-scale BGP networks
- IP routing configuration, Configuring basic IP routing
- IP routing IS-IS configuration, IS-IS configuration examples
- IP routing RIP configuration, RIP configuration examples
- IP routing static route, Static route configuration examples
- IPv4 BGP basics, Basic BGP configuration example
- IPv4 BGP BFD, BFD for BGP configuration example
- IPv4 BGP COMMUNITY, BGP community configuration example
- IPv4 BGP confederation, BGP confederation configuration example
- IPv4 BGP configuration, IPv4 BGP configuration examples
- IPv4 BGP FRR, BGP FRR configuration example
- IPv4 BGP GR, BGP GR configuration example
- IPv4 BGP load balancing, BGP load balancing configuration example
- IPv4 BGP path selection, BGP path selection configuration example
- IPv4 BGP route reflector, BGP route reflector configuration example
- IPv4 BGP route summarization, BGP route summarization configuration example
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IPv6 BGP 6PE, 6PE configuration example
- IPv6 BGP basics, IPv6 BGP basic configuration example
- IPv6 BGP BFD, BFD for IPv6 BGP configuration example
- IPv6 BGP configuration, IPv6 BGP configuration examples
- IPv6 BGP FRR, IPv6 BGP FRR configuration example
- IPv6 BGP packet IPsec, IPsec for IPv6 BGP packets configuration example
- IPv6 BGP route reflector, IPv6 BGP route reflector configuration example
- IPv6 default route configuration, Configuring an IPv6 default route
- IPv6 IS-IS basic configuration, IPv6 IS-IS basic configuration example
- IPv6 IS-IS BFD configuration, BFD for IPv6 IS-IS configuration example
- IPv6 IS-IS configuration, Configuring IPv6 IS-IS, IPv6 IS-IS configuration examples
- IPv6 PBR configuration, Configuring IPv6 PBR, IPv6 PBR configuration task list, IPv6 PBR configuration examples
- IPv6 PBR interface configuration (packet type-based), Packet type-based IPv6 interface PBR configuration example
- IPv6 PBR local configuration (packet type-based), Packet type-based IPv6 local PBR configuration example
- IPv6 static routing basic configuration, Basic IPv6 static route configuration example
- IPv6 static routing BFD (direct next hop), BFD for IPv6 static routes configuration example (direct next hop)
- IPv6 static routing BFD (indirect next hop), BFD for IPv6 static routes configuration example (indirect next hop)
- IPv6 static routing configuration, Configuring IPv6 static routing, IPv6 static routing configuration examples
- IS-IS configuration, Configuring IS-IS, IS-IS configuration task list
- OSPF basics configuration, Basic OSPF configuration example
- OSPF BFD configuration, BFD for OSPF configuration example
- OSPF configuration, Configuring OSPF, OSPF configuration task list, OSPF configuration examples
- OSPF DR election configuration, OSPF DR election configuration example
- OSPF FRR configuration, OSPF FRR configuration example
- OSPF GR configuration, OSPF GR configuration example
- OSPF NSR configuration, OSPF NSR configuration example
- OSPF route redistribution configuration, OSPF route redistribution configuration example
- OSPF route summarization configuration, OSPF route summarization configuration example
- OSPF virtual link configuration, OSPF virtual link configuration example
- OSPFv3 BFD configuration, BFD for OSPFv3 configuration example
- OSPFv3 configuration, Configuring OSPFv3, OSPFv3 configuration task list, OSPFv3 configuration examples
- OSPFv3 DR election configuration, OSPFv3 DR election configuration example
- OSPFv3 GR configuration, OSPFv3 GR configuration example
- OSPFv3 IPsec profile configuration, OSPFv3 IPsec profile configuration example
- OSPFv3 network optimization, Tuning and optimizing OSPFv3 networks
- OSPFv3 network tuning, Tuning and optimizing OSPFv3 networks
- OSPFv3 NSR configuration, OSPFv3 NSR configuration example
- OSPFv3 NSSA area configuration, OSPFv3 NSSA area configuration example
- OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- OSPFv3 route summarization, OSPFv3 route summarization configuration example
- OSPFv3 stub area configuration, OSPFv3 stub area configuration example
- PBR configuration, Configuring PBR, PBR configuration task list, Configuring PBR, PBR configuration examples
- PBR configuration (interface/packet type-based), Packet type-based interface PBR configuration example
- PBR configuration (local/packet type-based), Packet type-based local PBR configuration example
- RIP configuration, Configuring RIP, RIP configuration task list
- RIPng basic configuration, Basic RIPng configuration example
- RIPng configuration, Configuring RIPng, RIPng configuration task list, RIPng configuration examples
- RIPng IPsec profile configuration, RIPng IPsec profile configuration example
- RIPng route redistribution, RIPng route redistribution configuration example
- routing policy configuration, Configuring routing policies, Routing policy configuration examples
- static routing basic configuration, Basic static route configuration example
- static routing BFD configuration (direct next hop), BFD for static routes configuration example (direct next hop)
- static routing BFD configuration (indirect next hop), BFD for static routes configuration example (indirect next hop)
- static routing configuration, Configuring static routing
- static routing default route configuration, Configuring a default route
- static routing FRR configuration, Static route FRR configuration example
- NEXT_HOP
- IP routing BGP path attribute, BGP path attributes
- IPV4 BGP NEXT_HOP attribute configuration, Configuring the NEXT_HOP attribute
- IPV6 BGP NEXT_HOP attribute configuration, Configuring the NEXT_HOP attribute
- NO_ADVERTISE
- IP routing BGP COMMUNITY path attribute, BGP path attributes
- NO_EXPORT
- IP routing BGP COMMUNITY path attribute, BGP path attributes
- NO_EXPORT_SUBCONFED
- IP routing BGP COMMUNITY path attribute, BGP path attributes
- node
- IPv6 PBR node action, Configuring actions for an IPv6 node
- IPv6 PBR node creation, Creating an IPv6 node
- IPv6 PBR node match criteria, Configuring match criteria for an IPv6 node
- IPv6 PBR policy, Policy
- IPv6 PBR-Track collaboration, PBR and Track
- IS-IS pseudonode, DIS and pseudonodes
- IS-IS route control, Configuring IS-IS route control
- PBR apply clause, Policy
- PBR creation, Creating a node
- PBR if-match clause, Policy
- PBR match criteria, Configuring match criteria for a node
- PBR node action, Configuring actions for a node
- PBR policy, Policy
- PBR-Track collaboration, PBR and Track
- routing policy apply clause, Routing policy, Configuring apply clauses
- routing policy continue clause, Routing policy, Configuring the continue clause
- routing policy deny match, Routing policy
- routing policy if-match clause, Routing policy, Configuring if-match clauses
- routing policy permit match, Routing policy
- non-IETF
- OSPF GR, Configuring OSPF GR
- OSPF GR helper, Configuring OSPF GR helper
- OSPF GR restarter, Configuring OSPF GR restarter
- notifying
- IP routing BGP notification message, BGP message types
- IP routing BGP SNMP notification enable, Enabling SNMP notifications for BGP
- NSAP
- IS-IS address format, NSAP
- NET, NET
- N-SEL (IS-IS), SEL
- NSR
- IP routing BGP NSR, Configuring BGP NSR
- IS-IS NSR, Configuring IS-IS NSR
- IS-IS NSR configuration, IS-IS NSR configuration example
- OSPF configuration, Configuring OSPF NSR
- OSPF NSR configuration, OSPF NSR configuration example
- OSPFv3 NSR, Configuring OSPFv3 NSR
- OSPFv3 NSR configuration, OSPFv3 NSR configuration example
- NSSA
- OSPF area configuration, Configuring an NSSA area, OSPF NSSA area configuration example)
- OSPF NSSA area, NSSA area and totally NSSA area
- OSPF NSSA LSA, LSA types
- OSPF totally NSSA area, NSSA area and totally NSSA area
- OSPFv3 NSSA area, Configuring an NSSA area
- number
- IP routing BGP first AS number of EBGP route updates, Ignoring the first AS number of EBGP route updates
- IPv4 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- IPv4 BGP AS number substitution, Configuring AS number substitution
- IPv4 BGP fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- IPv4 BGP local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- IPv4 BGP private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
- IPv6 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- IPv6 BGP AS number substitution, Configuring AS number substitution
- IPv6 BGP fake AS number advertisement, Advertising a fake AS number to a peer or peer group
- IPv6 BGP local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- IPv6 BGP private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
O
- open
- IP routing BGP message, BGP message types
- Open Shortest Path First. Use
- Open Shortest Path First version 3. Use
- optimal
- IP routing BGP route, Advertising optimal routes in the IP routing table
- IP routing FIB table optimal routes, Routing table
- optimizing
- IP routing BGP network, Tuning and optimizing BGP networks
- IPv6 IS-IS networks, Tuning and optimizing IPv6 IS-IS networks
- IS-IS networks, Tuning and optimizing IS-IS networks
- OSPF network, Tuning and optimizing OSPF networks
- OSPFv3 network, Tuning and optimizing OSPFv3 networks
- RIP networks, Tuning and optimizing RIP networks
- RIPng network, Tuning and optimizing the RIPng network
- ORIGIN
- IP routing BGP path attribute, BGP path attributes
- OSPF, Configuring OSPFv3, See also
- area configuration, Configuring OSPF areas
- area configuration (NSSA), Configuring an NSSA area, OSPF NSSA area configuration example)
- area configuration (stub), Configuring a stub area, OSPF stub area configuration example
- areas, OSPF areas
- authentication configuration, Configuring OSPF authentication
- backbone area, Backbone area and virtual links
- basic configuration, Basic OSPF configuration example
- BDR, DR and BDR
- BDR election, DR and BDR election
- BDR mechanism, DR and BDR mechanism
- BFD configuration, Configuring BFD for OSPF, BFD for OSPF configuration example
- BFD detection configuration (bidirectional control), Configuring bidirectional control detection
- BFD detection configuration (single-hop echo), Configuring single-hop echo detection
- BFD FRR configuration, Configuring BFD for OSPF FRR
- configuration, Configuring OSPF, OSPF configuration task list, OSPF configuration examples
- DD packet interface MTU add, Adding the interface MTU into DD packets
- discard route configuration, Configuring discard routes for summary networks
- display, Displaying and maintaining OSPF
- DR, DR and BDR
- DR election, DR and BDR election
- DR election configuration, OSPF DR election configuration example
- DR mechanism, DR and BDR mechanism
- ECMP route max, Configuring the maximum number of ECMP routes
- enable, Enabling OSPF
- exit overflow interval, Configuring OSPF exit overflow interval
- FRR backup next hop calculation (LFA algorithm), Configuring OSPF FRR to calculate a backup next hop using the LFA algorithm
- FRR backup next hop specification (routing policy), Configuring OSPF FRR to specify a backup next hop using a routing policy
- FRR configuration, Configuring OSPF FRR, OSPF FRR configuration example
- GR configuration, Configuring OSPF GR, OSPF GR configuration example
- GR helper, Configuring OSPF GR helper
- GR restarter, Configuring OSPF GR restarter
- GR trigger, Triggering OSPF GR
- host route advertisement, Advertising a host route
- interface cost, Configuring an OSPF cost for an interface
- interface network type (broadcast), Configuring the broadcast network type for an interface
- interface network type (NBMA), Configuring the NBMA network type for an interface
- interface network type (P2MP), Configuring the P2MP network type for an interface
- interface network type (P2P), Configuring the P2P network type for an interface
- interface packet send/receive disable, Disabling interfaces from receiving and sending OSPF packets
- IS-IS BFD, Configuring BFD for IS-IS
- IS-IS DIS election, DIS and pseudonodes
- ISPF enable, Enabling OSPF ISPF
- log count configuration, Configuring the number of OSPF logs
- LSA arrival interval, Specifying the LSA arrival interval
- LSA generation interval, Specifying the LSA generation interval
- LSA transmission delay, Specifying LSA transmission delay
- LSA types, LSA types
- LSDB external LSAs max number, Configuring the maximum number of external LSAs in LSDB
- LSU transmit rate configuration, Configuring the LSU transmit rate
- maintain, Displaying and maintaining OSPF
- neighbor state change logging, Logging neighbor state changes
- network management configuration, Configuring OSPF network management
- network optimization, Tuning and optimizing OSPF networks
- network tuning, Tuning and optimizing OSPF networks
- network type configuration, Configuring OSPF network types
- network types, OSPF network types
- nonstop routing (NSR) configuration, Configuring OSPF NSR, OSPF NSR configuration example
- NSSA area, NSSA area and totally NSSA area
- packet DSCP value configuration, Configuring a DSCP value for OSPF packets
- packet types, OSPF packets
- PIC configuration, Configuring OSPF PIC
- PIC enable, Enabling OSPF PIC
- preference configuration, Configuring OSPF preference
- prefix prioritization, Configuring prefix prioritization
- prefix suppression, Configuring prefix suppression
- prefix suppression (interface), Configuring prefix suppression for an interface
- prefix suppression (OSPF process), Configuring prefix suppression for an OSPF process
- protocols and standards, Protocols and standards
- received route filtering, Configuring received OSPF route filtering
- RFC 1583 compatibility, Enabling compatibility with RFC 1583
- route calculation, Route calculation
- route control configuration, Configuring OSPF route control
- route redistribution, Configuring OSPF route redistribution
- route redistribution configuration, OSPF route redistribution configuration example
- route summarization, Configuring OSPF route summarization
- route summarization configuration, OSPF route summarization configuration example
- route types, Route types
- router types, Router types
- SPF calculation interval, Specifying SPF calculation interval
- stub area, Stub area and totally stub area
- stub router configuration, Configuring stub routers
- timer configuration, Configuring OSPF timers
- totally NSSA area, NSSA area and totally NSSA area
- totally stub area, Stub area and totally stub area
- troubleshoot configuration, Troubleshooting OSPF configuration
- troubleshoot incorrect routing information, Incorrect routing information
- troubleshoot no neighbor relationship established, No OSPF neighbor relationship established
- Type-3 LSA filtering, Configuring Type-3 LSA filtering
- virtual link configuration, Configuring a virtual link, OSPF virtual link configuration example
- virtual links, Backbone area and virtual links
- OSPFv3, Configuring OSPFv3, See also
- area parameter configuration, Configuring OSPFv3 area parameters
- BFD configuration, Configuring BFD for OSPFv3, BFD for OSPFv3 configuration example
- configuration, Configuring OSPFv3, OSPFv3 configuration task list, OSPFv3 configuration examples
- DD packet ignore MTU check, Ignoring MTU check for DD packets
- display, Displaying and maintaining OSPFv3
- DR election configuration, OSPFv3 DR election configuration example
- ECMP route max number, Configuring the maximum number of OSPFv3 ECMP routes
- enable, Enabling OSPFv3
- GR configuration, Configuring OSPFv3 GR, OSPFv3 GR configuration example
- GR helper configuration, Configuring GR helper
- GR restarter configuration, Configuring GR restarter
- GR trigger, Triggering OSPFv3 GR
- Inter-Area-Prefix LSA filtering, Configuring Inter-Area-Prefix LSA filtering
- interface cost configuration, Configuring an OSPFv3 cost for an interface
- interface DR priority, Configuring a DR priority for an interface
- interface packet send/receive disable, Disabling interfaces from receiving and sending OSPFv3 packets
- IPsec profile application, Applying an IPsec profile
- IPsec profile configuration, OSPFv3 IPsec profile configuration example
- LSA generation interval, Specifying the LSA generation interval
- LSA transmission delay, Specifying LSA transmission delay
- LSA types, OSPFv3 LSA types
- LSU transmit rate, Configuring the LSU transmit rate
- maintain, Displaying and maintaining OSPFv3
- NBMA neighbor configuration, Configuring an NBMA or P2MP neighbor
- neighbor state change logging, Enabling the logging of neighbor state changes
- network management configuration, Configuring OSPFv3 network management
- network optimization, Tuning and optimizing OSPFv3 networks
- network tuning, Tuning and optimizing OSPFv3 networks
- network type configuration, Configuring OSPFv3 network types
- network type configuration (interface), Configuring the OSPFv3 network type for an interface
- nonstop routing (NSR) configuration, Configuring OSPFv3 NSR, OSPFv3 NSR configuration example
- NSSA area configuration, Configuring an NSSA area, OSPFv3 NSSA area configuration example
- P2MP neighbor configuration, Configuring an NBMA or P2MP neighbor
- packet types, OSPFv3 packets
- preference configuration, Configuring a preference for OSPFv3
- prefix suppression, Configuring prefix suppression
- prefix suppression (interface), Configuring prefix suppression for an interface
- prefix suppression (OSPFv3 process), Configuring prefix suppression for an OSPFv3 process
- protocols and standards, Protocols and standards
- received route filtering, Configuring OSPFv3 received route filtering
- redistributed route summarization (ASBR), Configuring route summarization on an ASBR
- redistributed route tag, Configuring tags for redistributed routes
- route control configuration, Configuring OSPFv3 route control
- route redistribution, Configuring OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- route redistribution (another routing protocol), Redistributing routes from another routing protocol
- route redistribution (default route), Redistributing a default route
- route summarization, Configuring OSPFv3 route summarization, OSPFv3 route summarization configuration example
- route summarization (ABR), Configuring route summarization on an ABR
- SPF calculation interval, Specifying SPF calculation interval
- stub area configuration, Configuring a stub area, OSPFv3 stub area configuration example
- stub router configuration, Configuring stub routers
- timer configuration, Configuring OSPFv3 timers
- virtual link configuration, Configuring an OSPFv3 virtual link
P
- P2MP
- OSPF interface network type, Configuring the P2MP network type for an interface
- OSPF network type, OSPF network types
- OSPFv3 P2MP neighbor, Configuring an NBMA or P2MP neighbor
- P2P
- IS-IS network type, Configuring P2P network type for an interface
- OSPF interface network type, Configuring the P2P network type for an interface
- OSPF network type, OSPF network types, Configuring OSPF network types
- OSPFv3 network type, Configuring OSPFv3 network types
- OSPFv3 network type (interface), Configuring the OSPFv3 network type for an interface
- packet
- IP routing configuration, Configuring basic IP routing
- IP routing dynamic routing protocols, Dynamic routing protocols
- IP routing extension attribute redistribution, Extension attribute redistribution
- IP routing load sharing, Load sharing
- IP routing route backup, Route backup
- IP routing route preference, Route preference
- IP routing route recursion, Route recursion
- IP routing route redistribution, Route redistribution
- IPv6 BGP IPsec, Configuring IPsec for IPv6 BGP
- IPv6 BGP packet IPsec, IPsec for IPv6 BGP packets configuration example
- IPv6 PBR configuration, Configuring IPv6 PBR, IPv6 PBR configuration task list, Configuring IPv6 PBR, IPv6 PBR configuration examples
- IPv6 PBR interface configuration, Configuring IPv6 interface PBR
- IPv6 PBR interface configuration (packet type-based), Packet type-based IPv6 interface PBR configuration example
- IPv6 PBR local configuration, Configuring IPv6 local PBR
- IPv6 PBR local configuration (packet type-based), Packet type-based IPv6 local PBR configuration example
- IPv6 PBR policy, Policy
- IPv6 PBR policy configuration, Configuring an IPv6 policy
- IS-IS CSNP packet send interval, Specifying the interval for sending IS-IS CSNP packets
- IS-IS hello multiplier, Specifying the IS-IS hello multiplier
- IS-IS hello packet send interval, Specifying the interval for sending IS-IS hello packets
- IS-IS interface hello packet send, Enabling an interface to send small hello packets
- IS-IS interface packet send/receive, Disabling an interface from sending/receiving IS-IS packets
- IS-IS PDU CLVs, CLV
- IS-IS PDU hello type, Hello PDU
- IS-IS PDU LSP type, LSP
- IS-IS PDU SNP type, SNP
- IS-IS PDU types, IS-IS PDUs
- IS-IS PPP interface hello packet source address check, Enabling source address check for hello packets on a PPP interface
- OSPF basics configuration, Basic OSPF configuration example
- OSPF BFD configuration, Configuring BFD for OSPF
- OSPF configuration, Configuring OSPF, OSPF configuration task list, OSPF configuration examples
- OSPF DD, OSPF packets
- OSPF DD packet interface MTU, Adding the interface MTU into DD packets
- OSPF exit overflow interval, Configuring OSPF exit overflow interval
- OSPF FRR configuration, Configuring OSPF FRR
- OSPF GR, Configuring OSPF GR
- OSPF GR helper, Configuring OSPF GR helper
- OSPF GR restarter, Configuring OSPF GR restarter
- OSPF hello, OSPF packets
- OSPF interface packet send/receive disable, Disabling interfaces from receiving and sending OSPF packets
- OSPF ISPF, Enabling OSPF ISPF
- OSPF LSAck, OSPF packets
- OSPF LSDB external LSAs max number, Configuring the maximum number of external LSAs in LSDB
- OSPF LSR, OSPF packets
- OSPF LSU, OSPF packets
- OSPF LSU transmit rate, Configuring the LSU transmit rate
- OSPF packet DSCP value, Configuring a DSCP value for OSPF packets
- OSPF RFC 1583 compatibility, Enabling compatibility with RFC 1583
- OSPF route redistribution configuration, OSPF route redistribution configuration example
- OSPF stub router, Configuring stub routers
- OSPFv3 BFD configuration, BFD for OSPFv3 configuration example
- OSPFv3 configuration, Configuring OSPFv3, OSPFv3 configuration task list, OSPFv3 configuration examples
- OSPFv3 DD, OSPFv3 packets
- OSPFv3 DD packet ignore MTU check, Ignoring MTU check for DD packets
- OSPFv3 DR election configuration, OSPFv3 DR election configuration example
- OSPFv3 GR configuration, OSPFv3 GR configuration example
- OSPFv3 hello, OSPFv3 packets
- OSPFv3 interface packet send/receive disable, Disabling interfaces from receiving and sending OSPFv3 packets
- OSPFv3 IPsec profile configuration, OSPFv3 IPsec profile configuration example
- OSPFv3 LSAck, OSPFv3 packets
- OSPFv3 LSR, OSPFv3 packets
- OSPFv3 LSU, OSPFv3 packets
- OSPFv3 LSU transmit rate, Configuring the LSU transmit rate
- OSPFv3 NSSA area configuration, OSPFv3 NSSA area configuration example
- OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- OSPFv3 stub area configuration, OSPFv3 stub area configuration example
- OSPFv3 stub router, Configuring stub routers
- PBR configuration, Configuring PBR, PBR configuration task list, Configuring PBR, PBR configuration examples
- PBR configuration (interface), Configuring interface PBR
- PBR configuration (interface/packet type-based), Packet type-based interface PBR configuration example
- PBR configuration (local), Configuring local PBR
- PBR configuration (local/packet type-based), Packet type-based local PBR configuration example
- PBR policy configuration, Configuring a policy
- RIP BFD configuration (bidirectional control detection), Configuring bidirectional control detection
- RIP BFD configuration (single-hop echo detection/neighbor), Configuring single-hop echo detection (for a directly connected RIP neighbor)
- RIP BFD configuration (single-hop echo detection/specific destination), Configuring single-hop echo detection (for a specific destination)
- RIP network management configuration, Configuring RIP network management
- RIP packet max length, Setting the maximum length of RIP packets
- RIP packet send rate configuration, Configuring the RIP packet sending rate
- RIPng, RIPng packets
- RIPng packet zero field check, Configuring zero field check on RIPng packets
- parameter
- IS-IS LSDB overload bit, Setting the LSDB overload bit
- IS-IS LSP parameters, Configuring LSP parameters
- IS-IS route convergence priority, Configuring convergence priorities for specific routes
- IS-IS SPF calculation interval, Controlling SPF calculation interval
- OSPF redistributed route default parameters, Configuring default parameters for redistributed routes
- OSPFv3 area parameter, Configuring OSPFv3 area parameters
- path
- IP routing BGP MED attribute, Configuring the MED attribute
- IP routing BGP path attributes, BGP path attributes
- IP routing BGP path selection, Controlling BGP path selection
- IPv4 BGP COMMUNITY, BGP community configuration example
- IPv4 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv4 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv4 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv4 BGP MED default value, Configuring the default MED value
- IPv4 BGP NEXT_HOP attribute, Configuring the NEXT_HOP attribute
- IPv4 BGP path selection, BGP path selection configuration example
- IPv6 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv6 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv6 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv6 BGP MED default value, Configuring the default MED value
- IPv6 BGP NEXT_HOP attribute, Configuring the NEXT_HOP attribute
- OSPF configuration, Configuring OSPF
- PBR
- configuration, Configuring PBR, PBR configuration task list, Configuring PBR, PBR configuration examples
- configuration (interface), Configuring interface PBR
- configuration (interface/packet type-based), Packet type-based interface PBR configuration example
- configuration (local), Configuring local PBR
- configuration (local/packet type-based), Packet type-based local PBR configuration example
- displaying, Displaying and maintaining PBR
- interface PBR, Overview
- local PBR, Overview
- maintaining, Displaying and maintaining PBR
- node action configuration, Configuring actions for a node
- node creation, Creating a node
- node match criteria, Configuring match criteria for a node
- policy, Policy
- policy configuration, Configuring a policy
- relationship between match mode/clauses, Relationship between the match mode and clauses on the node
- Track collaboration, PBR and Track
- PDU
- IS-IS CLVs, CLV
- IS-IS hello type, Hello PDU
- IS-IS LSP type, LSP
- IS-IS SNP type, SNP
- IS-IS types, IS-IS PDUs
- PE
- IP routing BGP 6PE, Configuring 6PE
- IP routing BGP 6PE basics, Configuring basic 6PE
- IP routing BGP 6PE optional capabilities, Configuring optional 6PE capabilities
- IPv6 BGP 6PE configuration, 6PE configuration example
- peer
- BGP dynamic peer, Configuring dynamic BGP peers
- IP routing BGP, BGP speaker and BGP peer, Configuring a BGP peer
- IP routing BGP default route advertisement to peer/peer group, Advertising a default route to a peer or peer group
- IP routing BGP peer group, Settlements for problems in large-scale BGP networks, Configuring a BGP peer group
- IP routing EBGP, BGP speaker and BGP peer
- IP routing IBGP, BGP speaker and BGP peer
- IPv4 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv4 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- IPv4 BGP session establishment disable, Disabling BGP to establish a session to a peer or peer group
- IPv4 EBGP peer group, Configuring an EBGP peer group
- IPv4 EBGP peer protection (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- IPv4 IBGP peer group, Configuring an IBGP peer group
- IPv6 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv6 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- IPv6 BGP session establishment disable, Disabling BGP to establish a session to a peer or peer group
- IPv6 EBGP peer group, Configuring an EBGP peer group
- IPv6 EBGP peer protection (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- IPv6 IBGP peer group, Configuring an IBGP peer group
- IS-IS neighbor state change logging, Enabling the logging of neighbor state changes
- permitting
- IPv4 BGP local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- IPv6 BGP local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- PIC
- OSPF BFD, Configuring BFD for OSPF PIC
- OSPF configuration, Configuring OSPF PIC
- OSPF PIC enable, Enabling OSPF PIC
- point-to-point IS-IS network type, IS-IS network types
- poison reverse, Enabling split horizon and poison reverse, Enabling poison reverse
- RIPng configuration, Configuring split horizon and poison reverse
- policy
- IP routing BGP route filtering policy, Configuring BGP route filtering policies
- IPv4 BGP route distribution filtering policy, Configuring BGP route distribution filtering policies
- IPv4 BGP route reception filtering policy, Configuring BGP route reception filtering policies
- IPv6 BGP route distribution filtering policy, Configuring BGP route distribution filtering policies
- IPv6 BGP route reception filtering policy, Configuring BGP route reception filtering policies
- IPv6 PBR, Policy
- IPv6 PBR apply clause, apply clause
- IPv6 PBR configuration, Configuring IPv6 PBR, IPv6 PBR configuration task list, Configuring IPv6 PBR, IPv6 PBR configuration examples
- IPv6 PBR if-match clause, if-match clause
- IPv6 PBR interface configuration, Configuring IPv6 interface PBR
- IPv6 PBR interface configuration (packet type-based), Packet type-based IPv6 interface PBR configuration example
- IPv6 PBR local configuration, Configuring IPv6 local PBR
- IPv6 PBR local configuration (packet type-based), Packet type-based IPv6 local PBR configuration example
- IPv6 PBR match mode/node clause relationship, Relationship between the match mode and clauses on the node
- IPv6 PBR policy configuration, Configuring an IPv6 policy
- OSPF FRR backup next hop (routing policy), Configuring OSPF FRR to specify a backup next hop using a routing policy
- PBR, Policy
- PBR configuration, Configuring PBR, PBR configuration task list, Configuring a policy, Configuring PBR, PBR configuration examples
- PBR configuration (interface), Configuring interface PBR
- PBR configuration (interface/packet type-based), Packet type-based interface PBR configuration example
- PBR configuration (local), Configuring local PBR
- PBR configuration (local/packet type-based), Packet type-based local PBR configuration example
- PBR node action, Configuring actions for a node
- PBR node creation, Creating a node
- PBR node match criteria, Configuring match criteria for a node
- routing policy apply clause, Configuring apply clauses
- routing policy AS_PATH list, Configuring an AS path list
- routing policy COMMUNITY list, Configuring a community list
- routing policy configuration, Configuring routing policies, Configuring a routing policy, Routing policy configuration examples
- routing policy configuration (IPv4 route redistribution), Routing policy configuration example for IPv4 route redistribution
- routing policy configuration (IPv6 route redistribution), Routing policy configuration example for IPv6 route redistribution
- routing policy continue clause, Configuring the continue clause
- routing policy creation, Creating a routing policy
- routing policy extended community list, Configuring an extended community list
- routing policy filter configuration, Configuring filters
- routing policy filtering, Routing policy
- routing policy if-match clause, Configuring if-match clauses
- routing policy IP prefix list, Configuring an IP prefix list
- policy-based routing. Use
- poll packet timer (OSPF), Configuring OSPF timers
- PPP
- interface hello packet source address check, Enabling source address check for hello packets on a PPP interface
- preference
- IP routing route preference, Route preference
- OSPF host route advertisement, Advertising a host route
- OSPF protocol preference, Configuring OSPF preference
- OSPF route redistribution, Configuring OSPF route redistribution
- OSPFv3 preference, Configuring a preference for OSPFv3
- RIP configuration, Configuring a preference for RIP
- RIPng preference, Configuring a preference for RIPng
- preferred value
- IP routing BGP received route, Specifying a preferred value for routes received
- preferring
- IS-IS preference specification, Specifying a preference for IS-IS
- prefix
- OSPF PIC configuration, Configuring OSPF PIC
- OSPF prefix prioritization, Configuring prefix prioritization
- OSPF prefix suppression, Configuring prefix suppression
- OSPFv3 prefix suppression, Configuring prefix suppression
- routing policy IP prefix list, Configuring an IP prefix list
- routing policy prefix list, IP prefix list
- prioritizing
- OSPF prefix prioritization, Configuring prefix prioritization
- priority
- IPv6 IS-IS route convergence priority, Assigning a convergence priority to IPv6 IS-IS routes
- IS-IS interface DIS priority, Configuring a DIS priority for an interface
- IS-IS route convergence priority, Configuring convergence priorities for specific routes
- OSPF route level priority, Route types
- OSPFv3 interface DR priority, Configuring a DR priority for an interface
- procedure
- advertising IP routing BGP default route to peer/peer group, Advertising a default route to a peer or peer group
- advertising IP routing BGP optimal route, Advertising optimal routes in the IP routing table
- advertising IPv4 BGP fake AS number, Advertising a fake AS number to a peer or peer group
- advertising IPv6 BGP fake AS number, Advertising a fake AS number to a peer or peer group
- advertising IS-IS default route, Advertising a default route
- advertising RIP default route, Advertising a default route
- advertising RIPng default route, Advertising a default route
- advertising RIPv2 summary route, Advertising a summary route
- applying OSPFv3 IPsec profile, Applying an IPsec profile
- applying RIPng IPsec profile, Applying an IPsec profile
- assigning IPv6 IS-IS route convergence priority, Assigning a convergence priority to IPv6 IS-IS routes
- configuring BGP dynamic peer, Configuring dynamic BGP peers
- configuring BGP dynamic peer (IPv4 unicast address), Configuring dynamic BGP peers (IPv4 unicast address family)
- configuring BGP dynamic peer (IPv6 unicast address), Configuring dynamic BGP peers (IPv6 unicast address family)
- configuring BGP update sending delay, Configuring BGP update sending delay
- configuring IP routing BGP, BGP configuration task list
- configuring IP routing BGP 6PE, Configuring 6PE
- configuring IP routing BGP 6PE basics, Configuring basic 6PE
- configuring IP routing BGP 6PE optional capabilities, Configuring optional 6PE capabilities
- configuring IP routing BGP AS_PATH attribute, Configuring the AS_PATH attribute
- configuring IP routing BGP basics, Configuring basic BGP
- configuring IP routing BGP confederation, Configuring a BGP confederation
- configuring IP routing BGP confederation compatibility, Configuring confederation compatibility
- configuring IP routing BGP FRR, Configuring BGP FRR
- configuring IP routing BGP GR, Configuring BGP GR
- configuring IP routing BGP GR helper, Configuring BGP GR
- configuring IP routing BGP GR restarter, Configuring BGP GR
- configuring IP routing BGP GTSM, Configuring GTSM for BGP
- configuring IP routing BGP large-scale network, Configuring a large-scale BGP network
- configuring IP routing BGP MED attribute, Configuring the MED attribute
- configuring IP routing BGP NSR, Configuring BGP NSR
- configuring IP routing BGP peer, Configuring a BGP peer
- configuring IP routing BGP peer group, Configuring a BGP peer group
- configuring IP routing BGP route filtering policies, Configuring BGP route filtering policies
- configuring IP routing BGP route reflection, Configuring BGP route reflection
- configuring IP routing BGP route summarization, Configuring BGP route summarization
- configuring IP routing BGP soft reset, Configuring BGP soft-reset
- configuring IP routing ECMP route max number, Configuring the maximum number of ECMP routes
- configuring IP routing FIB route max lifetime, Configuring the maximum lifetime for routes in the FIB
- configuring IP routing IPv6 IS-IS route control, Configuring IPv6 IS-IS route control
- configuring IP routing IS-IS, IS-IS configuration examples
- configuring IP routing IS-IS circuit level, Configuring the IS level and circuit level
- configuring IP routing IS-IS FRR automatic backup next hop calculation, Configuring IS-IS FRR to automatically calculate a backup next hop
- configuring IP routing IS-IS FRR BFD, Configuring BFD for IS-IS FRR
- configuring IP routing IS-IS IS level, Configuring the IS level and circuit level
- configuring IP routing RIB label max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- configuring IP routing RIB route max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- configuring IP routing RIP, RIP configuration examples
- configuring IP routing RIP basics, Basic RIP configuration example
- configuring IP routing RIP BFD (bidirectional detection/control packet mode), BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- configuring IP routing RIP BFD (single-hop echo detection), BFD for RIP configuration example (single-hop echo detection for a directly connected neighbor)
- configuring IP routing RIP BFD (single-hop echo detection/specific destination), BFD for RIP configuration example (single hop echo detection for a specific destination)
- configuring IP routing RIP FRR, RIP FRR configuration example
- configuring IP routing RIP interface additional metric, RIP interface additional metric configuration example
- configuring IP routing RIP route redistribution, RIP route redistribution configuration example
- configuring IP routing RIP summary route advertisement, RIP summary route advertisement configuration example
- configuring IP routing static route, Static route configuration examples
- configuring IPv4 BGP, IPv4 BGP configuration examples
- configuring IPv4 BGP AS number substitution, Configuring AS number substitution
- configuring IPv4 BGP basics, Basic BGP configuration example
- configuring IPv4 BGP BFD, Configuring BFD for BGP, BFD for BGP configuration example
- configuring IPv4 BGP COMMUNITY, Configuring BGP community, BGP community configuration example
- configuring IPv4 BGP confederation, BGP confederation configuration example
- configuring IPv4 BGP default local preference, Configuring the default local preference
- configuring IPv4 BGP FRR, BGP FRR configuration example
- configuring IPv4 BGP GR, BGP GR configuration example
- configuring IPv4 BGP holdtime, Configuring the keepalive interval and hold time
- configuring IPv4 BGP keepalive interval, Configuring the keepalive interval and hold time
- configuring IPv4 BGP load balancing, BGP load balancing configuration example
- configuring IPv4 BGP MED default value, Configuring the default MED value
- configuring IPv4 BGP NEXT_HOP attribute, Configuring the NEXT_HOP attribute
- configuring IPv4 BGP path selection, BGP path selection configuration example
- configuring IPv4 BGP route dampening, Configuring BGP route dampening
- configuring IPv4 BGP route distribution filtering policies, Configuring BGP route distribution filtering policies
- configuring IPv4 BGP route preference, Configuring preferences for BGP routes
- configuring IPv4 BGP route reception filtering policies, Configuring BGP route reception filtering policies
- configuring IPv4 BGP route reflector, Configuring a BGP route reflector, BGP route reflector configuration example
- configuring IPv4 BGP route summarization, BGP route summarization configuration example
- configuring IPv4 BGP route summarization (automatic), Configuring automatic route summarization
- configuring IPv4 BGP route summarization (manual), Configuring manual route summarization
- configuring IPv4 BGP route update interval, Configuring the interval for sending updates for the same route
- configuring IPv4 BGP soft reset manually, Configuring manual soft-reset
- configuring IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- configuring IPv4 EBGP peer group, Configuring an EBGP peer group
- configuring IPv4 IBGP peer group, Configuring an IBGP peer group
- configuring IPv6 BGP, IPv6 BGP configuration examples
- configuring IPv6 BGP 6PE, 6PE configuration example
- configuring IPv6 BGP AS number substitution, Configuring AS number substitution
- configuring IPv6 BGP basics, IPv6 BGP basic configuration example
- configuring IPv6 BGP BFD, Configuring BFD for BGP, BFD for IPv6 BGP configuration example
- configuring IPv6 BGP COMMUNITY, Configuring BGP community
- configuring IPv6 BGP default local preference, Configuring the default local preference
- configuring IPv6 BGP FRR, IPv6 BGP FRR configuration example
- configuring IPv6 BGP holdtime, Configuring the keepalive interval and hold time
- configuring IPv6 BGP IPsec, Configuring IPsec for IPv6 BGP
- configuring IPv6 BGP keepalive interval, Configuring the keepalive interval and hold time
- configuring IPv6 BGP load balancing, Configuring BGP load balancing
- configuring IPv6 BGP MED default value, Configuring the default MED value
- configuring IPv6 BGP NEXT_HOP attribute, Configuring the NEXT_HOP attribute
- configuring IPv6 BGP packet IPsec, IPsec for IPv6 BGP packets configuration example
- configuring IPv6 BGP route dampening, Configuring BGP route dampening
- configuring IPv6 BGP route distribution filtering policies, Configuring BGP route distribution filtering policies
- configuring IPv6 BGP route preference, Configuring preferences for BGP routes
- configuring IPv6 BGP route reception filtering policies, Configuring BGP route reception filtering policies
- configuring IPv6 BGP route reflector, Configuring a BGP route reflector, IPv6 BGP route reflector configuration example
- configuring IPv6 BGP route update interval, Configuring the interval for sending updates for the same route
- configuring IPv6 BGP soft reset manually, Configuring manual soft-reset
- configuring IPv6 EBGP peer group, Configuring an EBGP peer group
- configuring IPv6 IBGP peer group, Configuring an IBGP peer group
- configuring IPv6 IS-IS, IPv6 IS-IS configuration examples
- configuring IPv6 IS-IS basics, Configuring basic IPv6 IS-IS, IPv6 IS-IS basic configuration example
- configuring IPv6 IS-IS BFD, Configuring BFD for IPv6 IS-IS, BFD for IPv6 IS-IS configuration example
- configuring IPv6 PBR, IPv6 PBR configuration task list, Configuring IPv6 PBR, IPv6 PBR configuration examples
- configuring IPv6 PBR interface, Configuring IPv6 interface PBR
- configuring IPv6 PBR interface (packet type-based), Packet type-based IPv6 interface PBR configuration example
- configuring IPv6 PBR local, Configuring IPv6 local PBR
- configuring IPv6 PBR local (packet type-based), Packet type-based IPv6 local PBR configuration example
- configuring IPv6 PBR node action, Configuring actions for an IPv6 node
- configuring IPv6 PBR node match criteria, Configuring match criteria for an IPv6 node
- configuring IPv6 PBR policy, Configuring an IPv6 policy
- configuring IPv6 static route, Configuring an IPv6 static route
- configuring IPv6 static route BFD, Configuring BFD for IPv6 static routes
- configuring IPv6 static route BFD control mode (direct next hop), Bidirectional control mode
- configuring IPv6 static route BFD control mode (indirect next hop), Bidirectional control mode
- configuring IPv6 static route BFD echo mode (single hop), Single-hop echo mode
- configuring IPv6 static routing, IPv6 static routing configuration examples
- configuring IPv6 static routing basics, Basic IPv6 static route configuration example
- configuring IPv6 static routing BFD (direct next hop), BFD for IPv6 static routes configuration example (direct next hop)
- configuring IPv6 static routing BFD (indirect next hop), BFD for IPv6 static routes configuration example (indirect next hop)
- configuring IS-IS, IS-IS configuration task list
- configuring IS-IS authentication, IS-IS authentication configuration example
- configuring IS-IS authentication (area), Configuring area authentication
- configuring IS-IS authentication (neighbor relationship), Configuring neighbor relationship authentication
- configuring IS-IS authentication (routing domain), Configuring routing domain authentication
- configuring IS-IS basics, Configuring basic IS-IS, Basic IS-IS configuration example
- configuring IS-IS BFD, Configuring BFD for IS-IS, BFD for IS-IS configuration example
- configuring IS-IS DIS election, DIS election configuration example
- configuring IS-IS ECMP routes max, Configuring the maximum number of ECMP routes
- configuring IS-IS FRR, Configuring IS-IS FRR, IS-IS FRR configuration example
- configuring IS-IS global cost, Configuring a global IS-IS cost
- configuring IS-IS GR, Configuring IS-IS GR, IS-IS GR configuration example
- configuring IS-IS interface cost, Configuring an IS-IS cost for an interface
- configuring IS-IS interface DIS priority, Configuring a DIS priority for an interface
- configuring IS-IS interface P2P network type, Configuring P2P network type for an interface
- configuring IS-IS link cost, Configuring IS-IS link cost
- configuring IS-IS LSP parameters, Configuring LSP parameters
- configuring IS-IS LSP timer, Configuring LSP timers
- configuring IS-IS LSP-calculated route filtering, Filtering routes calculated from received LSPs
- configuring IS-IS network management, Configuring IS-IS network management
- configuring IS-IS NSR, Configuring IS-IS NSR, IS-IS NSR configuration example
- configuring IS-IS redistributed route filtering, Filtering redistributed routes
- configuring IS-IS route control, Configuring IS-IS route control
- configuring IS-IS route convergence priority, Configuring convergence priorities for specific routes
- configuring IS-IS route filtering, Configuring IS-IS route filtering
- configuring IS-IS route leaking, Configuring IS-IS route leaking
- configuring IS-IS route redistribution, Configuring IS-IS route redistribution, IS-IS route redistribution configuration example
- configuring IS-IS route summarization, Configuring IS-IS route summarization
- configuring IS-IS system ID > host name mapping, Configuring system ID to host name mappings
- configuring IS-IS system ID > host name mapping (dynamic), Configuring dynamic system ID to host name mapping
- configuring IS-IS system ID > host name mapping (static), Configuring a static system ID to host name mapping
- configuring OSPF, OSPF configuration task list, OSPF configuration examples
- configuring OSPF area, Configuring OSPF areas
- configuring OSPF area (NSSA), Configuring an NSSA area, OSPF NSSA area configuration example)
- configuring OSPF area (stub), Configuring a stub area, OSPF stub area configuration example
- configuring OSPF authentication (area), Configuring OSPF area authentication
- configuring OSPF authentication (interface), Configuring OSPF interface authentication
- configuring OSPF basics, Basic OSPF configuration example
- configuring OSPF BFD, Configuring BFD for OSPF, BFD for OSPF configuration example
- configuring OSPF BFD detection (bidirectional control), Configuring bidirectional control detection
- configuring OSPF BFD detection (single-hop echo), Configuring single-hop echo detection
- configuring OSPF DD packet interface MTU, Adding the interface MTU into DD packets
- configuring OSPF discard route, Configuring discard routes for summary networks
- configuring OSPF DR election, OSPF DR election configuration example
- configuring OSPF ECMP route max, Configuring the maximum number of ECMP routes
- configuring OSPF exit overflow interval, Configuring OSPF exit overflow interval
- configuring OSPF FRR, Configuring OSPF FRR, OSPF FRR configuration example
- configuring OSPF FRR backup next hop (routing policy), Configuring OSPF FRR to specify a backup next hop using a routing policy
- configuring OSPF FRR backup next hop calculation (LFA algorithm), Configuring OSPF FRR to calculate a backup next hop using the LFA algorithm
- configuring OSPF FRR BFD, Configuring BFD for OSPF FRR
- configuring OSPF GR, Configuring OSPF GR, OSPF GR configuration example
- configuring OSPF GR helper, Configuring OSPF GR helper
- configuring OSPF GR restarter, Configuring OSPF GR restarter
- configuring OSPF host route advertisement, Advertising a host route
- configuring OSPF interface cost, Configuring an OSPF cost for an interface
- configuring OSPF interface network type (broadcast), Configuring the broadcast network type for an interface
- configuring OSPF interface network type (NBMA), Configuring the NBMA network type for an interface
- configuring OSPF interface network type (P2MP), Configuring the P2MP network type for an interface
- configuring OSPF interface network type (P2P), Configuring the P2P network type for an interface
- configuring OSPF log count, Configuring the number of OSPF logs
- configuring OSPF LSDB external LSAs max number, Configuring the maximum number of external LSAs in LSDB
- configuring OSPF LSU transmit rate, Configuring the LSU transmit rate
- configuring OSPF network management, Configuring OSPF network management
- configuring OSPF network type, Configuring OSPF network types
- configuring OSPF NSR, Configuring OSPF NSR, OSPF NSR configuration example
- configuring OSPF packet DSCP value, Configuring a DSCP value for OSPF packets
- configuring OSPF PIC, Configuring OSPF PIC
- configuring OSPF PIC BFD, Configuring BFD for OSPF PIC
- configuring OSPF preference, Configuring OSPF preference
- configuring OSPF prefix prioritization, Configuring prefix prioritization
- configuring OSPF prefix suppression, Configuring prefix suppression
- configuring OSPF prefix suppression (OSPF process), Configuring prefix suppression for an OSPF process
- configuring OSPF received route filtering, Configuring received OSPF route filtering
- configuring OSPF redistributed route default parameters, Configuring default parameters for redistributed routes
- configuring OSPF route control, Configuring OSPF route control
- configuring OSPF route redistribution, OSPF route redistribution configuration example
- configuring OSPF route redistribution (another routing protocol), Redistributing routes from another routing protocol
- configuring OSPF route redistribution (default route), Redistributing a default route
- configuring OSPF route summarization, Configuring OSPF route summarization, OSPF route summarization configuration example
- configuring OSPF route summarization (ABR), Configuring route summarization on an ABR
- configuring OSPF route summarization (ASBR), Configuring route summarization on an ASBR
- configuring OSPF stub router, Configuring stub routers
- configuring OSPF timer, Configuring OSPF timers
- configuring OSPF Type-3 LSA filtering, Configuring Type-3 LSA filtering
- configuring OSPF virtual link, Configuring a virtual link, OSPF virtual link configuration example
- configuring OSPFv3, OSPFv3 configuration task list, OSPFv3 configuration examples
- configuring OSPFv3 area parameter, Configuring OSPFv3 area parameters
- configuring OSPFv3 BFD, Configuring BFD for OSPFv3, BFD for OSPFv3 configuration example
- configuring OSPFv3 DR election, OSPFv3 DR election configuration example
- configuring OSPFv3 ECMP route max, Configuring the maximum number of OSPFv3 ECMP routes
- configuring OSPFv3 GR, Configuring OSPFv3 GR, OSPFv3 GR configuration example
- configuring OSPFv3 GR helper, Configuring GR helper
- configuring OSPFv3 GR restarter, Configuring GR restarter
- configuring OSPFv3 Inter-Area-Prefix LSA filtering, Configuring Inter-Area-Prefix LSA filtering
- configuring OSPFv3 interface cost, Configuring an OSPFv3 cost for an interface
- configuring OSPFv3 interface DR priority, Configuring a DR priority for an interface
- configuring OSPFv3 IPsec profile, OSPFv3 IPsec profile configuration example
- configuring OSPFv3 LSU transmit rate, Configuring the LSU transmit rate
- configuring OSPFv3 NBMA neighbor, Configuring an NBMA or P2MP neighbor
- configuring OSPFv3 network management, Configuring OSPFv3 network management
- configuring OSPFv3 network type, Configuring OSPFv3 network types
- configuring OSPFv3 network type (interface), Configuring the OSPFv3 network type for an interface
- configuring OSPFv3 NSR, Configuring OSPFv3 NSR, OSPFv3 NSR configuration example
- configuring OSPFv3 NSSA area, Configuring an NSSA area, OSPFv3 NSSA area configuration example
- configuring OSPFv3 P2MP neighbor, Configuring an NBMA or P2MP neighbor
- configuring OSPFv3 preference, Configuring a preference for OSPFv3
- configuring OSPFv3 prefix suppression, Configuring prefix suppression
- configuring OSPFv3 prefix suppression (interface), Configuring prefix suppression for an interface
- configuring OSPFv3 prefix suppression (OSPFv3 process), Configuring prefix suppression for an OSPFv3 process
- configuring OSPFv3 received route filtering, Configuring OSPFv3 received route filtering
- configuring OSPFv3 redistributed route summarization (ASBR), Configuring route summarization on an ASBR
- configuring OSPFv3 redistributed route tag, Configuring tags for redistributed routes
- configuring OSPFv3 route control, Configuring OSPFv3 route control
- configuring OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- configuring OSPFv3 route redistribution (another routing protocol), Redistributing routes from another routing protocol
- configuring OSPFv3 route redistribution (default route), Redistributing a default route
- configuring OSPFv3 route summarization, OSPFv3 route summarization configuration example
- configuring OSPFv3 route summarization (ABR), Configuring route summarization on an ABR
- configuring OSPFv3 stub area, Configuring a stub area, OSPFv3 stub area configuration example
- configuring OSPFv3 stub router, Configuring stub routers
- configuring OSPFv3 timer, Configuring OSPFv3 timers
- configuring OSPFv3 virtual link, Configuring an OSPFv3 virtual link
- configuring PBR, PBR configuration task list, Configuring PBR, PBR configuration examples
- configuring PBR (interface), Configuring interface PBR
- configuring PBR (interface/packet type-based), Packet type-based interface PBR configuration example
- configuring PBR (local), Configuring local PBR
- configuring PBR (local/packet type-based), Packet type-based local PBR configuration example
- configuring PBR node action, Configuring actions for a node
- configuring PBR node match criteria, Configuring match criteria for a node
- configuring PBR policy, Configuring a policy
- configuring RIP, RIP configuration task list
- configuring RIP additional routing metric, Configuring an additional routing metric
- configuring RIP basics, Configuring basic RIP
- configuring RIP BFD, Configuring BFD for RIP
- configuring RIP BFD (bidirectional control detection), Configuring bidirectional control detection
- configuring RIP BFD (single-hop echo detection/neighbor), Configuring single-hop echo detection (for a directly connected RIP neighbor)
- configuring RIP BFD (single-hop echo detection/specific destination), Configuring single-hop echo detection (for a specific destination)
- configuring RIP ECMP route max number, Configuring the maximum number of ECMP routes
- configuring RIP FRR, Configuring RIP FRR
- configuring RIP GR, Configuring RIP GR
- configuring RIP network management, Configuring RIP network management
- configuring RIP packet send rate, Configuring the RIP packet sending rate
- configuring RIP poison reverse, Enabling split horizon and poison reverse
- configuring RIP preference, Configuring a preference for RIP
- configuring RIP received/redistributed route filtering, Configuring received/redistributed route filtering
- configuring RIP route control, Configuring RIP route control
- configuring RIP route redistribution, Configuring RIP route redistribution
- configuring RIP split horizon, Enabling split horizon and poison reverse
- configuring RIP timers, Configuring RIP timers
- configuring RIP version, Configuring a RIP version
- configuring RIPng, RIPng configuration task list, RIPng configuration examples
- configuring RIPng basics, Configuring basic RIPng, Basic RIPng configuration example
- configuring RIPng ECMP route max, Configuring the maximum number of ECMP routes
- configuring RIPng GR, Configuring RIPng GR
- configuring RIPng IPsec profile configuration, RIPng IPsec profile configuration example
- configuring RIPng packet zero field check, Configuring zero field check on RIPng packets
- configuring RIPng poison reverse, Configuring split horizon and poison reverse
- configuring RIPng preference, Configuring a preference for RIPng
- configuring RIPng received/redistributed route filtering, Configuring received/redistributed route filtering
- configuring RIPng route control, Configuring RIPng route control
- configuring RIPng route redistribution, Configuring RIPng route redistribution, RIPng route redistribution configuration example
- configuring RIPng route summarization, Configuring RIPng route summarization
- configuring RIPng routing metric, Configuring an additional routing metric
- configuring RIPng split horizon, Configuring split horizon and poison reverse
- configuring RIPng timer, Configuring RIPng timers
- configuring RIPv2 message authentication, Configuring RIPv2 message authentication
- configuring RIPv2 route summarization, Configuring RIPv2 route summarization
- configuring routing policy, Configuring a routing policy
- configuring routing policy (IPv4 route redistribution), Routing policy configuration example for IPv4 route redistribution
- configuring routing policy (IPv6 route redistribution), Routing policy configuration example for IPv6 route redistribution
- configuring routing policy apply clause, Configuring apply clauses
- configuring routing policy AS_PATH list, Configuring an AS path list
- configuring routing policy COMMUNITY list, Configuring a community list
- configuring routing policy continue clause, Configuring the continue clause
- configuring routing policy extended community list, Configuring an extended community list
- configuring routing policy filter, Configuring filters
- configuring routing policy if-match clause, Configuring if-match clauses
- configuring routing policy IPv4 prefix list, Configuring an IPv4 prefix list
- configuring routing policy IPv6 prefix list, Configuring an IPv6 prefix list
- configuring static route, Configuring a static route
- configuring static route BFD, Configuring BFD for static routes
- configuring static route FRR (auto backup next hop), Configuring static route FRR to automatically select a backup next hop
- configuring static routing basics, Basic static route configuration example
- configuring static routing BFD (direct next hop), BFD for static routes configuration example (direct next hop)
- configuring static routing BFD (indirect next hop), BFD for static routes configuration example (indirect next hop)
- configuring static routing BFD bidirectional control mode (direct next hop), Bidirectional control mode
- configuring static routing BFD bidirectional control mode (indirect next hop), Bidirectional control mode
- configuring static routing BFD single-hop echo mode, Single-hop echo mode
- configuring static routing default route, Configuring a default route
- configuring static routing FRR, Configuring static route FRR, Static route FRR configuration example
- configuring static routing FRR (backup next hop), Configuring static route FRR by specifying a backup next hop
- controlling IP routing BGP path selection, Controlling BGP path selection
- controlling IP routing BGP route distribution, Controlling route distribution and reception
- controlling IP routing BGP route reception, Controlling route distribution and reception
- controlling IS-IS SPF calculation interval, Controlling SPF calculation interval
- controlling RIP interface advertisement, Controlling RIP reception and advertisement on interfaces
- controlling RIP interface reception, Controlling RIP reception and advertisement on interfaces
- creating IPv6 PBR node, Creating an IPv6 node
- creating PBR node, Creating a node
- creating routing policy, Creating a routing policy
- disabling IPv4 BGP AS_PATH optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- disabling IPv4 BGP session establishment, Disabling BGP to establish a session to a peer or peer group
- disabling IPv6 BGP AS_PATH optimal route selection, Disabling BGP from considering AS_PATH during optimal route selection
- disabling IPv6 BGP session establishment, Disabling BGP to establish a session to a peer or peer group
- disabling IS-IS interface packet send/receive, Disabling an interface from sending/receiving IS-IS packets
- disabling OSPF interface packet send/receive, Disabling interfaces from receiving and sending OSPF packets
- disabling OSPFv3 interface packet send/receive, Disabling interfaces from receiving and sending OSPFv3 packets
- disabling RIP host route reception, Disabling host route reception
- displaying IP routing BGP, Displaying and maintaining BGP
- displaying IP routing table, Displaying and maintaining a routing table
- displaying IPv4 BGP, Displaying and maintaining BGP
- displaying IPv6 BGP, Displaying and maintaining BGP
- displaying IPv6 IS-IS, Displaying and maintaining IPv6 IS-IS
- displaying IPv6 PBR, Displaying and maintaining IPv6 PBR
- displaying IPv6 static routing, Displaying and maintaining IPv6 static routes
- displaying IS-IS, Displaying and maintaining IS-IS
- displaying OSPF, Displaying and maintaining OSPF
- displaying OSPFv3, Displaying and maintaining OSPFv3
- displaying PBR, Displaying and maintaining PBR
- displaying RIP, Displaying and maintaining RIP
- displaying RIPng, Displaying and maintaining RIPng
- displaying routing policy, Displaying and maintaining the routing policy
- displaying static routing, Displaying and maintaining static routes
- enabling IP routing BGP, Enabling BGP
- enabling IP routing BGP route flapping logging, Enabling logging for BGP route flapping
- enabling IP routing BGP session state change logging, Enabling logging of session state changes
- enabling IP routing BGP SNMP notification, Enabling SNMP notifications for BGP
- enabling IP routing EBGP direct connections upon link failure, Enabling immediate re-establishment of direct EBGP connections upon link failure
- enabling IP routing ECMP enhanced mode, Enabling the enhanced ECMP mode
- enabling IP routing RIP (interface), Enabling RIP on an interface
- enabling IP routing RIP (network), Enabling RIP on a network
- enabling IPv4 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- enabling IPv4 BGP load balancing, Configuring BGP load balancing
- enabling IPv4 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- enabling IPv4 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- enabling IPv4 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- enabling IPv4 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- enabling IPv4 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- enabling IPv4 BGP route-refresh, Enabling route-refresh
- enabling IPv6 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- enabling IPv6 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- enabling IPv6 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- enabling IPv6 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- enabling IPv6 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- enabling IPv6 BGP peer MD5 authentication, Enabling MD5 authentication for BGP peers
- enabling IPv6 BGP route-refresh, Enabling route-refresh
- enabling IS-IS, Enabling IS-IS
- enabling IS-IS automatic cost calculation, Enabling automatic IS-IS cost calculation
- enabling IS-IS interface hello packet send, Enabling an interface to send small hello packets
- enabling IS-IS ISPF, Enabling IS-IS ISPF
- enabling IS-IS LSP flash flooding, Enabling LSP flash flooding
- enabling IS-IS LSP fragment extension, Enabling LSP fragment extension
- enabling IS-IS neighbor state change logging, Enabling the logging of neighbor state changes
- enabling IS-IS PPP interface hello packet source address check, Enabling source address check for hello packets on a PPP interface
- enabling OSPF (on interface), Enabling OSPF on an interface
- enabling OSPF (on network), Enabling OSPF on a network
- enabling OSPF ISPF, Enabling OSPF ISPF
- enabling OSPF neighbor state change logging, Logging neighbor state changes
- enabling OSPF PIC, Enabling OSPF PIC
- enabling OSPF RFC 1583 compatibility, Enabling compatibility with RFC 1583
- enabling OSPFv3, Enabling OSPFv3
- enabling OSPFv3 neighbor state change logging, Enabling the logging of neighbor state changes
- enabling RIP, Enabling RIP
- enabling RIP FRR BFD, Enabling BFD for RIP FRR
- enabling RIP poison reverse, Enabling poison reverse
- enabling RIP split horizon, Enabling split horizon
- enabling RIP update source IP address check, Enabling source IP address check on incoming RIP updates
- enabling RIPv1 message zero field check, Enabling zero field check on incoming RIPv1 messages
- enabling RIPv2 automatic route summarization, Enabling RIPv2 automatic route summarization
- enabling static routing FRR BFD echo packet mode, Enabling BFD echo packet mode for static route FRR
- enabling support for IPv6 routes with prefixes longer than 64 bits, Enabling support for IPv6 routes with prefixes longer than 64 bits
- enhancing IS-IS network security, Enhancing IS-IS network security
- generating IP routing BGP route, Generating BGP routes
- ignoring IP routing BGP first AS number of EBGP route updates, Ignoring the first AS number of EBGP route updates
- ignoring IPv4 BGP ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- ignoring IPv6 BGP ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- ignoring OSPFv3 DD packet MTU check, Ignoring MTU check for DD packets
- injecting IPv4 BGP local network, Injecting a local network
- injecting IPv6 BGP local network, Injecting a local network
- limiting IPv4 BGP routes received from peer/peer group, Limiting routes received from a peer or peer group, Limiting routes received from a peer or peer group
- limiting IPv6 BGP routes received from peer/peer group, Limiting routes received from a peer or peer group, Limiting routes received from a peer or peer group
- maintaining IP routing BGP, Displaying and maintaining BGP
- maintaining IP routing table, Displaying and maintaining a routing table
- maintaining IPv4 BGP, Displaying and maintaining BGP
- maintaining IPv6 BGP, Displaying and maintaining BGP
- maintaining IPv6 PBR, Displaying and maintaining IPv6 PBR
- maintaining IS-IS, Displaying and maintaining IS-IS
- maintaining OSPF, Displaying and maintaining OSPF
- maintaining OSPFv3, Displaying and maintaining OSPFv3
- maintaining PBR, Displaying and maintaining PBR
- maintaining RIP, Displaying and maintaining RIP
- maintaining RIPng, Displaying and maintaining RIPng
- maintaining routing policy, Displaying and maintaining the routing policy
- optimizing IP routing BGP network, Tuning and optimizing BGP networks
- optimizing IPv6 IS-IS networks, Tuning and optimizing IPv6 IS-IS networks
- optimizing IS-IS networks, Tuning and optimizing IS-IS networks
- optimizing OSPF network, Tuning and optimizing OSPF networks
- optimizing OSPFv3 network, Tuning and optimizing OSPFv3 networks
- optimizing RIP networks, Tuning and optimizing RIP networks
- optimizing RIPng network, Tuning and optimizing the RIPng network
- permitting IPv4 BGP local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- permitting IPv6 BGP local AS number appearance, Permitting local AS number to appear in routes from a peer or peer group
- protecting IPv4 EBGP peer (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- protecting IPv6 EBGP peer (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- redistributing IPv4 BGP IGP routes, Redistributing IGP routes
- redistributing IPv6 BGP IGP routes, Redistributing IGP routes
- removing IPv4 BGP private AS number from EBGP peer/peer group update, Removing private AS numbers from updates sent to an EBGP peer or peer group
- removing IPv6 BGP private AS number from EBGP peer/peer group update, Removing private AS numbers from updates sent to an EBGP peer or peer group
- saving IPv4 BGP route update, Saving updates
- saving IPv6 BGP route update, Saving updates
- setting IS-IS LSDB overload bit, Setting the LSDB overload bit
- setting RIP packet max length, Setting the maximum length of RIP packets
- specifying IP routing BGP TCP connection source address, Specifying the source address of TCP connections
- specifying IPv4 BGP received route preferred value, Specifying a preferred value for routes received
- specifying IPv6 BGP received route preferred value, Specifying a preferred value for routes received
- specifying IS-IS CSNP packet send interval, Specifying the interval for sending IS-IS CSNP packets
- specifying IS-IS hello multiplier, Specifying the IS-IS hello multiplier
- specifying IS-IS hello packet send interval, Specifying the interval for sending IS-IS hello packets
- specifying IS-IS LSP length, Specifying LSP lengths
- specifying IS-IS preference, Specifying a preference for IS-IS
- specifying OSPF LSA arrival interval, Specifying the LSA arrival interval
- specifying OSPF LSA generation interval, Specifying the LSA generation interval
- specifying OSPF LSA transmission delay, Specifying LSA transmission delay
- specifying OSPF SPF calculation interval, Specifying SPF calculation interval
- specifying OSPFv3 LSA generation interval, Specifying the LSA generation interval
- specifying OSPFv3 LSA transmission delay, Specifying LSA transmission delay
- specifying OSPFv3 SPF calculation interval, Specifying SPF calculation interval
- specifying RIP neighbor, Specifying a RIP neighbor
- triggering OSPF GR, Triggering OSPF GR
- triggering OSPFv3 GR, Triggering OSPFv3 GR
- troubleshooting IP routing BGP peer connection state, Symptom
- troubleshooting OSPF incorrect routing information, Incorrect routing information
- troubleshooting OSPF no neighbor relationship established, No OSPF neighbor relationship established
- tuning IP routing BGP network, Tuning and optimizing BGP networks
- tuning IP routing OSPF network, Tuning and optimizing OSPF networks
- tuning IP routing RIP networks, Tuning and optimizing RIP networks
- tuning IPv6 IS-IS network, Tuning and optimizing IPv6 IS-IS networks
- tuning IS-IS network, Tuning and optimizing IS-IS networks
- tuning OSPFv3 network, Tuning and optimizing OSPFv3 networks
- tuning RIPng network, Tuning and optimizing the RIPng network
- protecting
- IPv4 EBGP peer (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- IPv6 EBGP peer (low memory exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- protocols and standards
- IP routing BGP, Protocols and standards
- IP routing dynamic routing protocols, Dynamic routing protocols
- IP routing MP-BGP, Protocols and standards
- IS-IS, Protocols and standards
- OSPF, Protocols and standards
- OSPF preference, Configuring OSPF preference
- OSPF RFC 1583 compatibility, Enabling compatibility with RFC 1583
- OSPFv3, Protocols and standards
- RIP, Protocols and standards
- RIPng, Protocols and standards
- triggered RIP (TRIP), Protocols and standards
R
- rate
- OSPFv3 LSU transmit rate, Configuring the LSU transmit rate
- receiving
- IPv4 BGP routes received from peer/peer group, Limiting routes received from a peer or peer group
- IPv6 BGP routes received from peer/peer group, Limiting routes received from a peer or peer group
- IS-IS interface packet send/receive, Disabling an interface from sending/receiving IS-IS packets
- OSPF interface packet send/receive disable, Disabling interfaces from receiving and sending OSPF packets
- OSPFv3 interface packet send/receive disable, Disabling interfaces from receiving and sending OSPFv3 packets
- RIPng received/redistributed route filtering, Configuring received/redistributed route filtering
- recursion
- IP routing BGP route recursion, BGP load balancing, BGP load balancing
- IP routing route recursion, Route recursion
- redistributing
- IP routing BGP route generation, Generating BGP routes
- IP routing BGP route summarization, Configuring BGP route summarization
- IP routing extension attribute redistribution, Extension attribute redistribution
- IP routing RIP route redistribution, RIP route redistribution configuration example
- IP routing route redistribution, Route redistribution
- IPv4 BGP IGP routes, Redistributing IGP routes
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IPv6 BGP IGP routes, Redistributing IGP routes
- IS-IS redistributed route filtering, Filtering redistributed routes
- IS-IS route redistribution, Configuring IS-IS route redistribution, IS-IS route redistribution configuration example
- OSPF redistributed route default parameters, Configuring default parameters for redistributed routes
- OSPF route redistribution, Configuring OSPF route redistribution
- OSPF route redistribution (default route), Redistributing a default route
- OSPF route redistribution configuration, OSPF route redistribution configuration example
- OSPFv3 redistributed route tag, Configuring tags for redistributed routes
- OSPFv3 route (another routing protocol), Redistributing routes from another routing protocol
- OSPFv3 route (default route), Redistributing a default route
- OSPFv3 route redistribution, Configuring OSPFv3 route redistribution
- RIP received/redistributed route filtering, Configuring received/redistributed route filtering
- RIP routes, Configuring RIP route redistribution
- RIPng received/redistributed route filtering, Configuring received/redistributed route filtering
- RIPng route redistribution, Configuring RIPng route redistribution, RIPng route redistribution configuration example
- reflecting
- IP routing BGP route reflector, Settlements for problems in large-scale BGP networks
- removing
- IPv4 BGP private AS number removal, Removing private AS numbers from updates sent to an EBGP peer or peer group
- IPv6 BGP private AS number, Removing private AS numbers from updates sent to an EBGP peer or peer group
- restrictions
- RIP FRR configuration, Configuration restrictions and guidelines
- RFC 1583 compatibility (OSPF), Enabling compatibility with RFC 1583
- RIB
- IP routing FIB route max lifetime, Configuring the maximum lifetime for routes in the FIB
- IP routing RIB label max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IP routing RIB route max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- RIP, Configuring RIPng, See also
- additional routing metric configuration, Configuring an additional routing metric
- basic configuration, Configuring basic RIP, Basic RIP configuration example
- BFD configuration, Configuring BFD for RIP
- BFD configuration (bidirectional control detection), Configuring bidirectional control detection
- BFD configuration (bidirectional detection/control packet mode), BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- BFD configuration (single-hop echo detection), BFD for RIP configuration example (single-hop echo detection for a directly connected neighbor)
- BFD configuration (single-hop echo detection/neighbor), Configuring single-hop echo detection (for a directly connected RIP neighbor)
- BFD configuration (single-hop echo detection/specific destination), Configuring single-hop echo detection (for a specific destination), BFD for RIP configuration example (single hop echo detection for a specific destination)
- configuration, Configuring RIP, RIP configuration task list, RIP configuration examples
- default route advertisement, Advertising a default route
- displaying, Displaying and maintaining RIP
- ECMP route max number, Configuring the maximum number of ECMP routes
- enabling, Enabling RIP
- FRR BFD enable, Enabling BFD for RIP FRR
- FRR configuration, Configuring RIP FRR, RIP FRR configuration example
- FRR configuration restrictions, Configuration restrictions and guidelines
- GR configuration, Configuring RIP GR
- GR helper configuration, Configuring RIP GR
- GR restarter configuration, Configuring RIP GR
- host route reception disable, Disabling host route reception
- interface additional metric configuration, RIP interface additional metric configuration example
- interface advertisement control, Controlling RIP reception and advertisement on interfaces
- interface reception control, Controlling RIP reception and advertisement on interfaces
- IPv6. See
- maintaining, Displaying and maintaining RIP
- neighbor specification, Specifying a RIP neighbor
- network management configuration, Configuring RIP network management
- network optimization, Tuning and optimizing RIP networks
- network tuning, Tuning and optimizing RIP networks
- operation, RIP operation
- packet max length, Setting the maximum length of RIP packets
- packet send rate configuration, Configuring the RIP packet sending rate
- poison reverse configuration, Enabling split horizon and poison reverse
- poison reverse enable, Enabling poison reverse
- preference configuration, Configuring a preference for RIP
- protocols and standards, Protocols and standards
- received/redistributed route filtering, Configuring received/redistributed route filtering
- RIPv1 message zero field check enable, Enabling zero field check on incoming RIPv1 messages
- RIPv2 message authentication configuration, Configuring RIPv2 message authentication
- RIPv2 route summarization configuration, Configuring RIPv2 route summarization
- route control configuration, Configuring RIP route control
- route entries, RIP route entries
- route redistribution, RIP route redistribution configuration example
- route redistribution configuration, Configuring RIP route redistribution
- routing loop prevention, Routing loop prevention
- split horizon configuration, Enabling split horizon and poison reverse
- split horizon enable, Enabling split horizon
- summary route advertisement configuration, RIP summary route advertisement configuration example
- timer configuration, Configuring RIP timers
- update source IP address check, Enabling source IP address check on incoming RIP updates
- version configuration, Configuring a RIP version
- versions, RIP versions
- RIPng, Configuring RIPng, See also
- basic configuration, Configuring basic RIPng, Basic RIPng configuration example
- configuration, Configuring RIPng, RIPng configuration task list, RIPng configuration examples
- default route advertisement, Advertising a default route
- display, Displaying and maintaining RIPng
- ECMP route max, Configuring the maximum number of ECMP routes
- GR configuration, Configuring RIPng GR
- IPsec profile application, Applying an IPsec profile
- IPsec profile configuration, RIPng IPsec profile configuration example
- maintain, Displaying and maintaining RIPng
- network optimization, Tuning and optimizing the RIPng network
- network tuning, Tuning and optimizing the RIPng network
- packet, RIPng packets
- packet zero field check, Configuring zero field check on RIPng packets
- poison reverse configuration, Configuring split horizon and poison reverse
- preference configuration, Configuring a preference for RIPng
- protocols and standards, Protocols and standards
- received/redistributed route filtering, Configuring received/redistributed route filtering
- route control, Configuring RIPng route control
- route entry, RIPng route entries
- route redistribution, RIPng route redistribution configuration example
- route redistribution configuration, Configuring RIPng route redistribution
- route summarization, Configuring RIPng route summarization
- routing metric configuration, Configuring an additional routing metric
- split horizon configuration, Configuring split horizon and poison reverse
- timer configuration, Configuring RIPng timers
- RIPv1
- message zero field check enable, Enabling zero field check on incoming RIPv1 messages
- protocols and standards, Protocols and standards
- RIP basic configuration, Configuring basic RIP
- RIP configuration, Configuring RIP, RIP configuration task list, RIP configuration examples
- RIP versions, RIP versions
- version configuration, Configuring a RIP version
- RIPv2
- automatic route summarization enable, Enabling RIPv2 automatic route summarization
- message authentication configuration, Configuring RIPv2 message authentication
- protocols and standards, Protocols and standards
- RIP basic configuration, Configuring basic RIP
- RIP configuration, Configuring RIP, RIP configuration task list, RIP configuration examples
- RIP versions, RIP versions
- route summarization configuration, Configuring RIPv2 route summarization
- summary route advertisement, Advertising a summary route
- version configuration, Configuring a RIP version
- route
- BGP update sending delay, Configuring BGP update sending delay
- IP routing BGP default route advertisement to peer/peer group, Advertising a default route to a peer or peer group
- IP routing BGP optimal route advertisement rules, Advertising optimal routes in the IP routing table
- IP routing BGP route advertisement rules, BGP route advertisement rules
- IP routing BGP route dampening, Settlements for problems in large-scale BGP networks
- IP routing BGP route filtering policies, Configuring BGP route filtering policies
- IP routing BGP route generation, Generating BGP routes
- IP routing BGP route recursion, BGP load balancing
- IP routing BGP route reflection, Configuring BGP route reflection
- IP routing BGP route reflector, Settlements for problems in large-scale BGP networks
- IP routing BGP route selection, BGP route selection, BGP load balancing
- IP routing BGP route summarization, Settlements for problems in large-scale BGP networks
- IP routing BGP route-refresh message, BGP message types
- IP routing ECMP route max number, Configuring the maximum number of ECMP routes
- IP routing FIB route max lifetime, Configuring the maximum lifetime for routes in the FIB
- IP routing FIB table optimal routes, Routing table
- IP routing load sharing, Load sharing
- IP routing RIB label max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IP routing RIB route max lifetime, Configuring the maximum lifetime for routes and labels in the RIB
- IP routing RIP route redistribution, RIP route redistribution configuration example
- IP routing route backup, Route backup
- IP routing route preference, Route preference
- IP routing route recursion, Route recursion
- IP routing route redistribution, Route redistribution
- IP routing static route, Static route configuration examples
- IPv4 BGP IGP route redistribution, Redistributing IGP routes
- IPv4 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv4 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv4 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv4 BGP ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- IPv4 BGP route dampening, Configuring BGP route dampening
- IPv4 BGP route distribution filtering policies, Configuring BGP route distribution filtering policies
- IPv4 BGP route reception filtering policies, Configuring BGP route reception filtering policies
- IPv4 BGP route reflector, Configuring a BGP route reflector, BGP route reflector configuration example
- IPv4 BGP route refresh, Enabling route-refresh
- IPv4 BGP route summarization, BGP route summarization configuration example
- IPv4 BGP route update interval, Configuring the interval for sending updates for the same route
- IPv4 BGP route update save, Saving updates
- IPv4 BGP routes received from peer/peer group, Limiting routes received from a peer or peer group
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IPv6 BGP IGP route redistribution, Redistributing IGP routes
- IPv6 BGP MED AS route comparison (confederation peers), Enabling MED comparison for routes from confederation peers
- IPv6 BGP MED AS route comparison (diff ASs), Enabling MED comparison for routes from different ASs
- IPv6 BGP MED AS route comparison (per-AS), Enabling MED comparison for routes on a per-AS basis
- IPv6 BGP ORIGINATOR_ID attribute, Ignoring the ORIGINATOR_ID attribute
- IPv6 BGP route dampening, Configuring BGP route dampening
- IPv6 BGP route distribution filtering policies, Configuring BGP route distribution filtering policies
- IPv6 BGP route reception filtering policies, Configuring BGP route reception filtering policies
- IPv6 BGP route reflector, Configuring a BGP route reflector, IPv6 BGP route reflector configuration example
- IPv6 BGP route refresh, Enabling route-refresh
- IPv6 BGP route update interval, Configuring the interval for sending updates for the same route
- IPv6 BGP route update save, Saving updates
- IPv6 BGP routes received from peer/peer group, Limiting routes received from a peer or peer group
- IPv6 default route configuration, Configuring an IPv6 default route
- IPv6 IS-IS route control, Configuring IPv6 IS-IS route control
- IPv6 IS-IS route convergence priority, Assigning a convergence priority to IPv6 IS-IS routes
- IPv6 static route BFD configuration, Configuring BFD for IPv6 static routes
- IPv6 static route BFD control mode (direct next hop), Bidirectional control mode
- IPv6 static route BFD control mode (indirect next hop), Bidirectional control mode
- IPv6 static route BFD echo mode (single hop), Single-hop echo mode
- IPv6 static route configuration, Configuring an IPv6 static route
- IPv6 static routing basic configuration, Basic IPv6 static route configuration example
- IPv6 static routing BFD (direct next hop), BFD for IPv6 static routes configuration example (direct next hop)
- IPv6 static routing BFD (indirect next hop), BFD for IPv6 static routes configuration example (indirect next hop)
- IPv6 static routing configuration, Configuring IPv6 static routing, IPv6 static routing configuration examples
- IS-IS default route advertisement, Advertising a default route
- IS-IS ECMP routes max, Configuring the maximum number of ECMP routes
- IS-IS LSP-calculated route filtering, Filtering routes calculated from received LSPs
- IS-IS redistributed route filtering, Filtering redistributed routes
- IS-IS route control, Configuring IS-IS route control
- IS-IS route filtering, Configuring IS-IS route filtering
- IS-IS route leaking, Configuring IS-IS route leaking, Configuring IS-IS route leaking
- IS-IS route redistribution, Configuring IS-IS route redistribution, IS-IS route redistribution configuration example
- IS-IS route summarization, Configuring IS-IS route summarization
- OSPF area configuration (NSSA), OSPF NSSA area configuration example)
- OSPF area configuration (stub), OSPF stub area configuration example
- OSPF discard route configuration, Configuring discard routes for summary networks
- OSPF ECMP route max, Configuring the maximum number of ECMP routes
- OSPF host route advertisement, Advertising a host route
- OSPF preference, Configuring OSPF preference
- OSPF received route filtering, Configuring received OSPF route filtering
- OSPF route calculation, Route calculation
- OSPF route control, Configuring OSPF route control
- OSPF route level priority, Route types
- OSPF route redistribution, Configuring OSPF route redistribution
- OSPF route redistribution configuration, OSPF route redistribution configuration example
- OSPF route summarization, Configuring OSPF route summarization
- OSPF route summarization configuration, OSPF route summarization configuration example
- OSPFv3 ECMP route max, Configuring the maximum number of OSPFv3 ECMP routes
- OSPFv3 received route filtering, Configuring OSPFv3 received route filtering
- OSPFv3 redistributed route summarization (ASBR), Configuring route summarization on an ASBR
- OSPFv3 route control, Configuring OSPFv3 route control
- OSPFv3 route redistribution, Configuring OSPFv3 route redistribution, OSPFv3 route redistribution configuration example
- OSPFv3 route summarization, Configuring OSPFv3 route summarization, OSPFv3 route summarization configuration example
- OSPFv3 route summarization (ABR), Configuring route summarization on an ABR
- RIP default route advertisement, Advertising a default route
- RIP ECMP route max number, Configuring the maximum number of ECMP routes
- RIP host route reception disable, Disabling host route reception
- RIP poison reverse configuration, Enabling split horizon and poison reverse
- RIP preference configuration, Configuring a preference for RIP
- RIP received/redistributed route filtering, Configuring received/redistributed route filtering
- RIP route control configuration, Configuring RIP route control
- RIP route entries, RIP route entries
- RIP route redistribution configuration, Configuring RIP route redistribution
- RIP split horizon configuration, Enabling split horizon and poison reverse
- RIP update source IP address check, Enabling source IP address check on incoming RIP updates
- RIPng default route advertisement, Advertising a default route
- RIPng ECMP route max, Configuring the maximum number of ECMP routes
- RIPng preference, Configuring a preference for RIPng
- RIPng received/redistributed route filtering, Configuring received/redistributed route filtering
- RIPng route control, Configuring RIPng route control
- RIPng route entry, RIPng route entries
- RIPng route redistribution, Configuring RIPng route redistribution, RIPng route redistribution configuration example
- RIPng route summarization, Configuring RIPng route summarization
- RIPv1 message zero field check, Enabling zero field check on incoming RIPv1 messages
- RIPv2 summary route advertisement, Advertising a summary route
- routing policy filters, Filters
- static routing basic configuration, Basic static route configuration example
- static routing BFD configuration, Configuring BFD for static routes
- static routing BFD configuration (direct next hop), BFD for static routes configuration example (direct next hop)
- static routing BFD configuration (indirect next hop), BFD for static routes configuration example (indirect next hop)
- static routing configuration, Configuring static routing, Configuring a static route
- static routing default route configuration, Configuring a default route
- static routing FRR configuration, Configuring static route FRR, Static route FRR configuration example
- router
- IP routing BGP peer, BGP speaker and BGP peer
- IP routing BGP speaker, BGP speaker and BGP peer
- IP routing EBGP peer, BGP speaker and BGP peer
- IP routing IBGP peer, BGP speaker and BGP peer
- IP routing IS-IS circuit level, Configuring the IS level and circuit level
- IP routing IS-IS IS level, Configuring the IS level and circuit level
- IS-IS authentication, IS-IS authentication configuration example
- IS-IS basics configuration, Basic IS-IS configuration example
- IS-IS BFD configuration, BFD for IS-IS configuration example
- IS-IS DIS election configuration, DIS election configuration example
- IS-IS FRR configuration, IS-IS FRR configuration example
- IS-IS GR configuration, IS-IS GR configuration example
- IS-IS interface P2P network type, Configuring P2P network type for an interface
- IS-IS Level-1 router, IS-IS area
- IS-IS Level-1-2 router, IS-IS area
- IS-IS Level-2 router, IS-IS area
- IS-IS NSR configuration, IS-IS NSR configuration example
- IS-IS route leaking, Route leaking
- IS-IS route redistribution, IS-IS route redistribution configuration example
- IS-IS routing method, Routing method
- IS-IS system ID, System ID
- OSPF ABR router type, Router types
- OSPF ASBR router type, Router types
- OSPF backbone router type, Router types
- OSPF internal router type, Router types
- OSPF router LSA, LSA types
- OSPF stub router, Configuring stub routers
- OSPFv3 stub router, Configuring stub routers
- routing
- IPv4 BGP load balancing, Configuring BGP load balancing
- IPv6 BGP load balancing, Configuring BGP load balancing
- IPv6 BGP packet IPsec, IPsec for IPv6 BGP packets configuration example
- IPv6 default route. See under IPv6 static routing
- IPv6 IS-IS. See
- IPv6 policy-based routing. See
- IPv6 static routing. See
- policy-based routing. Use
- tuning BGP network, Tuning and optimizing BGP networks
- Routing Information Protocol. Use
- routing policy
- display, Displaying and maintaining the routing policy
- maintain, Displaying and maintaining the routing policy
- rule
- IP routing BGP route advertisement rules, BGP route advertisement rules
S
- saving
- IPv4 BGP route update, Saving updates
- IPv6 BGP route update, Saving updates
- security
- IP routing BGP GTSM configuration, Configuring GTSM for BGP
- IPv6 BGP IPsec, Configuring IPsec for IPv6 BGP
- IPv6 BGP packet IPsec, IPsec for IPv6 BGP packets configuration example
- IS-IS authentication, IS-IS authentication configuration example
- IS-IS authentication (area), Configuring area authentication
- IS-IS authentication (neighbor relationship), Configuring neighbor relationship authentication
- IS-IS authentication (routing domain), Configuring routing domain authentication
- IS-IS network security enhancement, Enhancing IS-IS network security
- OSPF authentication (area), Configuring OSPF area authentication
- OSPF authentication (interface), Configuring OSPF interface authentication
- OSPF prefix prioritization, Configuring prefix prioritization
- OSPF prefix suppression, Configuring prefix suppression
- OSPFv3 IPsec profile application, Applying an IPsec profile
- OSPFv3 IPsec profile configuration, OSPFv3 IPsec profile configuration example
- OSPFv3 prefix suppression, Configuring prefix suppression
- RIPng IPsec profile application, Applying an IPsec profile
- RIPng IPsec profile configuration, RIPng IPsec profile configuration example
- SEL
- IS-IS N-SEL, SEL
- NET, NET
- selecting
- IP routing BGP path selection, Controlling BGP path selection
- IP routing BGP route, BGP route selection
- IP routing BGP route selection, BGP load balancing
- IPv4 BGP path selection, BGP path selection configuration example
- sending
- BGP update sending delay, Configuring BGP update sending delay
- IS-IS CSNP packet send interval, Specifying the interval for sending IS-IS CSNP packets
- IS-IS hello packet send interval, Specifying the interval for sending IS-IS hello packets
- IS-IS interface hello packet send, Enabling an interface to send small hello packets
- IS-IS interface packet send/receive, Disabling an interface from sending/receiving IS-IS packets
- OSPF interface packet send/receive disable, Disabling interfaces from receiving and sending OSPF packets
- OSPFv3 interface packet send/receive disable, Disabling interfaces from receiving and sending OSPFv3 packets
- session
- IP routing BGP session state change logging, Enabling logging of session state changes
- IPv4 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- IPv4 BGP session establishment disable, Disabling BGP to establish a session to a peer or peer group
- IPv6 BGP multiple hop EBGP session establishment, Enabling BGP to establish an EBGP session over multiple hops
- IPv6 BGP session establishment disable, Disabling BGP to establish a session to a peer or peer group
- setting
- IS-IS LSDB overload bit, Setting the LSDB overload bit
- RIP packet max length, Setting the maximum length of RIP packets
- SNMP
- IP routing BGP SNMP notification enable, Enabling SNMP notifications for BGP
- SNP IS-IS PDU type, SNP
- soft reset
- IP routing BGP soft reset, Configuring BGP soft-reset
- IPv4 BGP manual configuration, Configuring manual soft-reset
- IPv6 BGP manual configuration, Configuring manual soft-reset
- source
- IS-IS PPP interface hello packet source address check, Enabling source address check for hello packets on a PPP interface
- RIP source IP address check, Enabling source IP address check on incoming RIP updates
- speaker
- IP routing BGP, BGP speaker and BGP peer
- specifying
- IP routing BGP TCP connection source address, Specifying the source address of TCP connections
- IPv4 BGP received route preferred value, Specifying a preferred value for routes received
- IPv6 BGP received route preferred value, Specifying a preferred value for routes received
- IS-IS CSNP packet send interval, Specifying the interval for sending IS-IS CSNP packets
- IS-IS hello multiplier, Specifying the IS-IS hello multiplier
- IS-IS hello packet send interval, Specifying the interval for sending IS-IS hello packets
- IS-IS LSP length, Specifying LSP lengths
- IS-IS preference, Specifying a preference for IS-IS
- OSPF LSA arrival interval, Specifying the LSA arrival interval
- OSPF LSA generation interval, Specifying the LSA generation interval
- OSPF LSA transmission delay, Specifying LSA transmission delay
- OSPF SPF calculation interval, Specifying SPF calculation interval
- OSPFv3 LSA generation interval, Specifying the LSA generation interval
- OSPFv3 LSA transmission delay, Specifying LSA transmission delay
- OSPFv3 SPF calculation interval, Specifying SPF calculation interval
- RIP neighbor, Specifying a RIP neighbor
- SPF
- IS-IS calculation interval, Controlling SPF calculation interval
- OSPF SPF calculation interval, Specifying SPF calculation interval
- OSPFv3 SPF calculation interval, Specifying SPF calculation interval
- split horizon, Enabling split horizon and poison reverse, Enabling split horizon
- RIPng configuration, Configuring split horizon and poison reverse
- state
- IP routing BGP session state change logging, Enabling logging of session state changes
- OSPF neighbor state change logging, Logging neighbor state changes
- static
- IS-IS system ID > host name mapping, Configuring a static system ID to host name mapping
- routing. See
- static routing
- basic configuration, Basic static route configuration example
- BFD configuration (direct next hop), BFD for static routes configuration example (direct next hop)
- BFD configuration (indirect next hop), BFD for static routes configuration example (indirect next hop)
- configuration, Configuring static routing, Static route configuration examples
- default route configuration, Configuring a default route
- display, Displaying and maintaining static routes
- FRR configuration, Static route FRR configuration example
- IPv6. See
- routing configuration, Configuring a static route
- static routing BFD bidirectional control mode (direct next hop), Bidirectional control mode
- static routing BFD bidirectional control mode (indirect next hop), Bidirectional control mode
- static routing BFD configuration, Configuring BFD for static routes
- static routing BFD single-hop echo mode, Single-hop echo mode
- static routing FRR configuration, Configuring static route FRR
- stub
- OSPF area configuration, OSPF stub area configuration example
- OSPF area configuration (stub), Configuring a stub area
- OSPF stub area, Stub area and totally stub area
- OSPF stub router, Configuring stub routers
- OSPF totally stub area, Stub area and totally stub area
- OSPFv3 stub area, Configuring a stub area
- OSPFv3 stub router, Configuring stub routers
- substituting
- IPv4 BGP AS number substitution, Configuring AS number substitution
- IPv6 BGP AS number substitution, Configuring AS number substitution
- summarizing
- IP routing BGP route summarization, Settlements for problems in large-scale BGP networks, Configuring BGP route summarization
- IPv4 BGP route summarization, BGP route summarization configuration example
- IPv4 BGP route summarization (automatic), Configuring automatic route summarization
- IPv4 BGP route summarization (manual), Configuring manual route summarization
- IS-IS route summarization, Configuring IS-IS route summarization
- OSPF route summarization, Configuring OSPF route summarization
- OSPF route summarization configuration, OSPF route summarization configuration example
- OSPFv3 redistributed route summarization (ASBR), Configuring route summarization on an ASBR
- OSPFv3 route summarization, Configuring OSPFv3 route summarization, OSPFv3 route summarization configuration example
- OSPFv3 route summarization (ABR), Configuring route summarization on an ABR
- RIPng route summarization, Configuring RIPng route summarization
- RIPv2 automatic route summarization enable, Enabling RIPv2 automatic route summarization
- RIPv2 route summarization configuration, Configuring RIPv2 route summarization
- RIPv2 summary route advertisement, Advertising a summary route
- suppressing
- IPv4 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- IPv6 BGP 4-byte AS number suppression, Enabling 4-byte AS number suppression
- OSPF prefix suppression, Configuring prefix suppression
- OSPFv3 prefix suppression, Configuring prefix suppression
- RIP suppress timer, Configuring RIP timers
- switch
- IP routing IS-IS configuration, IS-IS configuration examples
- switchover
- IP routing BGP NSR, Configuring BGP NSR
- system
- IS-IS system ID, System ID
- IS-IS system ID > host name mapping, Configuring system ID to host name mappings
T
- table
- IP routing, Routing table
- tag
- OSPFv3 redistributed route tag, Configuring tags for redistributed routes
- TCP
- IP routing BGP configuration, Configuring BGP, BGP configuration task list
- IP routing BGP TCP connection source address, Specifying the source address of TCP connections
- IPv4 BGP basics, Basic BGP configuration example
- IPv4 BGP BFD, BFD for BGP configuration example
- IPv4 BGP COMMUNITY, BGP community configuration example
- IPv4 BGP confederation, BGP confederation configuration example
- IPv4 BGP configuration, IPv4 BGP configuration examples
- IPv4 BGP FRR, BGP FRR configuration example
- IPv4 BGP GR, BGP GR configuration example
- IPv4 BGP load balancing, BGP load balancing configuration example
- IPv4 BGP path selection, BGP path selection configuration example
- IPv4 BGP route reflector, BGP route reflector configuration example
- IPv4 BGP route summarization, BGP route summarization configuration example
- IPv4 BGP-IGP route redistribution, BGP and IGP route redistribution configuration example
- IPv6 BGP basics, IPv6 BGP basic configuration example
- IPv6 BGP BFD, BFD for IPv6 BGP configuration example
- IPv6 BGP configuration, IPv6 BGP configuration examples
- IPv6 BGP FRR, IPv6 BGP FRR configuration example
- IPv6 BGP route reflector, IPv6 BGP route reflector configuration example
- threshold
- IPv4 EBGP peer protection (level 2 threshold exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- IPv6 EBGP peer protection (level 2 threshold exemption), Protecting an EBGP peer when memory usage reaches level 2 threshold
- time
- IPv4 BGP holdtime, Configuring the keepalive interval and hold time
- IPv6 BGP holdtime, Configuring the keepalive interval and hold time
- timeout
- RIP timeout timer, Configuring RIP timers
- timer
- IS-IS LSP timer configuration, Configuring LSP timers
- OSPF dead packet timer, Configuring OSPF timers
- OSPF hello packet timer, Configuring OSPF timers
- OSPF LSA retransmission packet timer, Configuring OSPF timers
- OSPF packet timer, Configuring OSPF timers
- OSPF poll packet timer, Configuring OSPF timers
- OSPFv3 timer, Configuring OSPFv3 timers
- RIP garbage-collect timer, Configuring RIP timers
- RIP suppress timer, Configuring RIP timers
- RIP timeout timer, Configuring RIP timers
- RIP update timer, Configuring RIP timers
- RIPng timer configuration, Configuring RIPng timers
- TLV
- IPv6 Interface Address, Overview
- IPv6 IS-IS basic configuration, IPv6 IS-IS basic configuration example
- IPv6 IS-IS BFD configuration, BFD for IPv6 IS-IS configuration example
- IPv6 IS-IS configuration, Configuring IPv6 IS-IS, IPv6 IS-IS configuration examples
- IPv6 Reachability, Overview
- topology
- IPv6 default route configuration, Configuring an IPv6 default route
- IPv6 static route configuration, Configuring an IPv6 static route
- IPv6 static routing basic configuration, Basic IPv6 static route configuration example
- IPv6 static routing BFD (direct next hop), BFD for IPv6 static routes configuration example (direct next hop)
- IPv6 static routing BFD (indirect next hop), BFD for IPv6 static routes configuration example (indirect next hop)
- IPv6 static routing configuration, Configuring IPv6 static routing, IPv6 static routing configuration examples
- IS-IS ISPF, Enabling IS-IS ISPF
- Track
- IPv6 PBR collaboration, PBR and Track
- PBR collaboration, PBR and Track
- static routing configuration, Configuring a static route
- transmitting
- OSPFv3 LSU transmit rate, Configuring the LSU transmit rate
- trapping
- IP routing BGP SNMP notification enable, Enabling SNMP notifications for BGP
- IS-IS network management, Configuring IS-IS network management
- OSPF network management, Configuring OSPF network management
- OSPFv3 network management, Configuring OSPFv3 network management
- triggered RIP
- protocols and standards, Protocols and standards
- triggering
- OSPF GR, Triggering OSPF GR
- OSPFv3 GR, Triggering OSPFv3 GR
- troubleshooting
- IP routing BGP, Troubleshooting BGP
- IP routing BGP peer connection state, Symptom
- OSPF configuration, Troubleshooting OSPF configuration
- OSPF incorrect routing information, Incorrect routing information
- OSPF no neighbor relationship established, No OSPF neighbor relationship established
- TTL
- IP routing BGP GTSM configuration, Configuring GTSM for BGP
- tuning
- IP routing BGP network, Tuning and optimizing BGP networks
- IPv6 IS-IS network, Tuning and optimizing IPv6 IS-IS networks
- IS-IS network, Tuning and optimizing IS-IS networks
- OSPF network, Tuning and optimizing OSPF networks
- OSPFv3 network, Tuning and optimizing OSPFv3 networks
- RIP networks, Tuning and optimizing RIP networks
- RIPng network, Tuning and optimizing the RIPng network
- tunneling
- IPv6 BGP packet IPsec, IPsec for IPv6 BGP packets configuration example
- Type 1 external
- OSPF route type, Route types
- Type 2 external
- OSPF route type, Route types
U
- UDP
- IP routing RIP configuration, RIP configuration examples
- RIP configuration, Configuring RIP, RIP configuration task list
- RIPng basic configuration, Configuring basic RIPng, Basic RIPng configuration example
- RIPng configuration, Configuring RIPng, RIPng configuration task list, RIPng configuration examples
- RIPng GR configuration, Configuring RIPng GR
- RIPng IPsec profile configuration, RIPng IPsec profile configuration example
- RIPng route redistribution, RIPng route redistribution configuration example
- unicast
- BGP dynamic peer, Configuring dynamic BGP peers
- IP routing BGP peer, Configuring a BGP peer
- IP routing configuration, Configuring basic IP routing
- IP routing dynamic routing protocols, Dynamic routing protocols
- IP routing extension attribute redistribution, Extension attribute redistribution
- IP routing load sharing, Load sharing
- IP routing route backup, Route backup
- IP routing route preference, Route preference
- IP routing route recursion, Route recursion
- IP routing route redistribution, Route redistribution
- OSPF network type, OSPF network types
- updating
- IP routing BGP update message, BGP message types
- IPv4 BGP route update, Saving updates
- IPv4 BGP route update interval, Configuring the interval for sending updates for the same route
- IPv6 BGP route update, Saving updates
- IPv6 BGP route update interval, Configuring the interval for sending updates for the same route
- RIP source IP address check, Enabling source IP address check on incoming RIP updates
- RIP update timer, Configuring RIP timers