Configuring apply clauses

1. Enter system view.

system-view

N/A

2. Enter routing policy node view.

route-policy route-policy-name { deny | permit } node node-number

N/A

3. Set the AS_PATH attribute for BGP routes.

apply as-path as-number&<1-32> [ replace ]

By default, no AS_PATH attribute is set for BGP routes.

4. Delete the specified COMMUNITY attribute for BGP routes.

apply comm-list { comm-list-number | comm-list-name } delete

By default, no COMMUNITY attribute is deleted for BGP routes.

5. Set the specified COMMUNITY attribute for BGP routes.

apply community { none | additive | { community-number&<1-32> | aa:nn&<1-32> | internet | no-advertise | no-export | no-export-subconfed } * [ additive ] }

By default, no community attribute is set for BGP routes.

6. Set a cost for routes.

apply cost [ + | - ] value

By default, no cost is set for routes.

7. Set a cost type for routes.

apply cost-type { external | internal | type-1 | type-2 }

By default, no cost type is set for routes.

8. Set the extended community attribute for BGP routes.

apply extcommunity { rt route-target }&<1-32> [ additive ]

By default, no extended community attribute is set for BGP routes.

9. Set the next hop for routes.

• Set the next hop for IPv4 routes:apply ip-address next-hop ip-address [ public | vpn-instance vpn-instance-name ]

• Set the next hop for IPv6 routes:apply ipv6 next-hop ipv6-address

By default, no next hop is set for IPv4/IPv6 routes.

The apply ip-address next-hop and apply ipv6 next-hop commands do not apply to redistributed IPv4 and IPv6 routes.

10. Redistribute routes to a specified IS-IS level.

apply isis { level-1 | level-1-2 | level-2 }

By default, routes are not redistributed into a specified IS-IS level.

11. Set a local preference for BGP routes.

apply local-preference preference

By default, no local preference is set for BGP routes.

12. Set MPLS labels.

apply mpls-label

By default, no MPLS label is set.

13. Set the ORIGIN attribute for BGP routes.

apply origin { egp as-number | igp | incomplete }

By default, no ORIGIN attribute is set for BGP routes.

14. Set a preference.

apply preference preference

By default, no preference is set.

15. Set a preferred value for BGP routes.

apply preferred-value preferred-value

By default, no preferred value is set for BGP routes.

16. Set a prefix priority.

apply prefix-priority { critical | high | medium }

By default, no prefix priority is set, which means the prefix priority is low.

17. Set a tag value for IGP routes.

apply tag value

By default, no tag value is set for IGP routes.

18. Set a backup link for fast reroute (FRR).

• Set an IPv4 backup link for FRR:apply fast-reroute { backup-interface interface-type interface-number [ backup-nexthop ip-address ] | backup-nexthop ip-address }

• Set an IPv6 backup link for FRR:apply ipv6 fast-reroute backup-nexthop ipv6-address

By default, no backup link is set for FRR.