OSPFv3 configuration task list

(Required.) Enabling OSPFv3

(Optional.) Configuring OSPFv3 area parameters:

• Configuring a stub area

• Configuring an NSSA area

• Configuring an OSPFv3 virtual link

(Optional.) Configuring OSPFv3 network types:

• Configuring the OSPFv3 network type for an interface

• Configuring an NBMA or P2MP neighbor

(Optional.) Configuring OSPFv3 route control:

• Configuring OSPFv3 route summarization

• Configuring OSPFv3 received route filtering

• Configuring Inter-Area-Prefix LSA filtering

• Configuring an OSPFv3 cost for an interface

• Configuring the maximum number of OSPFv3 ECMP routes

• Configuring a preference for OSPFv3

• Configuring OSPFv3 route redistribution

(Optional.) Tuning and optimizing OSPFv3 networks:

• Configuring OSPFv3 timers

• Specifying LSA transmission delay

• Configuring a DR priority for an interface

• Specifying SPF calculation interval

• Specifying the LSA generation interval

• Ignoring MTU check for DD packets

• Disabling interfaces from receiving and sending OSPFv3 packets

• Enabling the logging of neighbor state changes

• Configuring OSPFv3 network management

• Configuring the LSU transmit rate

• Configuring stub routers

• Configuring prefix suppression

(Optional.) Configuring OSPFv3 GR:

• Configuring GR restarter

• Configuring GR helper

• Triggering OSPFv3 GR

(Optional.) Configuring OSPFv3 NSR

(Optional.) Configuring BFD for OSPFv3

(Optional.) Applying an IPsec profile