Configuring local PBR
Configure PBR by applying a policy locally. PBR uses the policy to guide the forwarding of locally generated packets. The specified policy must already exist. Otherwise, the local PBR configuration fails.
You can apply only one policy locally. Before you apply a new policy, you must first remove the current policy.
Local PBR might affect local services, such as ping and Telnet. Do not configure local PBR unless doing so is required.
To configure local PBR:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Apply a policy locally. | ip local policy-based-route policy-name | By default, no policy is locally applied. |