Configuring the maximum number of ECMP routes

Perform this task to implement load sharing over ECMP routes.

To configure the maximum number of ECMP routes:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter RIP view.	rip [ process-id ] [ vpn-instance vpn-instance-name ]	N/A
3. Configure the maximum number of ECMP routes.	maximum load-balancing number	By default, the maximum number of RIP ECMP routes equals the maximum number of ECMP routes supported by the system. Use the max-ecmp-num command to configure the maximum number of ECMP routes supported by the system. For more information about the max-ecmp-num command, see Layer 3—IP Routing Command Reference.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter RIP view.

rip [ process-id ] [ vpn-instance vpn-instance-name ]

N/A

3. Configure the maximum number of ECMP routes.

maximum load-balancing number

By default, the maximum number of RIP ECMP routes equals the maximum number of ECMP routes supported by the system.

Use the max-ecmp-num command to configure the maximum number of ECMP routes supported by the system. For more information about the max-ecmp-num command, see Layer 3—IP Routing Command Reference.

prev	up	next
Enabling split horizon and poison reverse	home	Enabling zero field check on incoming RIPv1 messages