Disabling an interface from sending/receiving IS-IS packets

After being disabled from sending and receiving hello packets, an interface cannot form any neighbor relationship, but can advertise directly connected networks in LSPs through other interfaces. This can save bandwidth and CPU resources, and ensures that other routers know networks directly connected to the interface.

To disable an interface from sending and receiving IS-IS packets:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter interface view.	interface interface-type interface-number	N/A
3. Disable the interface from sending and receiving IS-IS packets.	isis silent	By default, the interface can send and receive IS-IS packets.

prev	up	next
Enabling source address check for hello packets on a PPP interface	home	Enabling an interface to send small hello packets