Configuring actions for an IPv6 node
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter IPv6 policy node view. | ipv6 policy-based-route policy-name [ deny | permit ] node node-number | N/A |
3. Set next hops for permitted IPv6 packets. | apply next-hop [ vpn-instance vpn-instance-name ] { ipv6-address [ direct ] [ track track-entry-number ] }&<1-n> | By default, no next hop is specified. You can specify multiple next hops for backup by executing this command once or multiple times. You can specify a maximum of two next hops for a node. |