Configuring OSPFv3 network management
This task involves the following configurations:
Bind an OSPFv3 process to MIB so that you can use network management software to manage the specified OSPFv3 process.
Enable SNMP notifications for OSPFv3 to report important events.
Configure the SNMP notification output interval and the maximum number of SNMP notifications that can be output at each interval.
SNMP notifications are sent to the SNMP module, which outputs SNMP notifications according to the configured output rules. For more information about SNMP notifications, see Network Management and Monitoring Configuration Guide.
The standard OSPFv3 MIB provides only single-instance MIB objects. For SNMP to correctly identify OSPFv3 management information in the standard OSPFv3 MIB, you must configure a unique context name for OSPFv3. If multiple OSPFv3 processes exist, you must assign a unique context to each process.
Context is a method introduced to SNMPv3 for multiple-instance management. For SNMPv1/v2c, you must specify a community name as a context name for protocol identification.
To configure OSPFv3 network management:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Bind OSPFv3 MIB to an OSPFv3 process. | ospfv3 mib-binding process-id | By default, OSPFv3 MIB is bound to the process with the smallest process ID. |
3. Enable SNMP notifications for OSPFv3. | snmp-agent trap enable ospfv3 [ grrestarter-status-change | grhelper-status-change | if-state-change | if-cfg-error | if-bad-pkt | neighbor-state-change | nssatranslator-status-change | virtif-bad-pkt | virtif-cfg-error | virtif-state-change | virtgrhelper-status-change | virtneighbor-state-change ]* | By default, SNMP notifications for OSPFv3 are enabled. |
4. Enter OSPFv3 view. | ospfv3 [ process-id | vpn-instance vpn-instance-name ] * | N/A |
5. (Optional.) Configure an SNMP context for OSPFv3. | snmp context-name context-name | By default, no SNMP context is configured for OSPFv3. |
6. (Optional.) Configure the SNMP notification output interval and the maximum number of SNMP notifications that can be output at each interval. | snmp trap rate-limit interval trap-interval count trap-number | By default, OSPFv3 outputs a maximum of seven SNMP notifications within 10 seconds. |