Specifying the LSA generation interval
You can adjust the LSA generation interval to protect network resources and routers from being over consumed by frequent network changes.
For a stable network, the minimum interval is used. If network changes become frequent, the LSA generation interval is incremented by the incremental interval × 2n-2 for each generation until the maximum interval is reached. The value n is the number of generation times.
To configure the LSA generation interval:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter OSPFv3 view. | ospfv3 [ process-id | vpn-instance vpn-instance-name ] * | N/A |
3. Configure the LSA generation interval. | lsa-generation-interval maximum-interval [ minimum-interval [ incremental-interval ] ] | By default, the maximum interval is 5 seconds, the minimum interval is 0 milliseconds, and the incremental interval is 0 milliseconds. |