Front LEDs and power button module
- Power down the server.
- Remove all power:
- Disconnect each power cord from the power source.
- Disconnect each power cord from the server.
- Remove the access panel.
- Remove the tower bezel.
- Place the server on its side.
- Disconnect the front LEDs and power button module.
- Remove the front LEDs and buttons cable:
- Press LEDs inward into the chassis.
- Release the power button.
- Pull the front LEDs and power button module cable away from the chassis.
- Use both hands to ensure the two LEDs get through the power buttons hole.
To replace the component, reverse the removal procedure.