VLAN-based MLD snooping tasks at a glance

To configure MLD snooping for VLANs, perform the following tasks:

1. Enabling the MLD snooping feature

2. Enabling MLD snooping

   Choose the following tasks as needed:

   • Enabling MLD snooping globally

   • Enabling MLD snooping for VLANs

3. (Optional.) Configuring basic MLD snooping features

   • Specifying an MLD snooping version

   • Setting the maximum number of MLD snooping forwarding entries

   • Configuring static IPv6 multicast MAC address entries

   • Setting the MLD last listener query interval

4. (Optional.) Configuring MLD snooping port features

   • Setting aging timers for dynamic ports

   • Configuring a static member port

   • Configuring a static router port

   • Configuring a port as a simulated member host

   • Enabling fast-leave processing

   • Disabling a port from becoming a dynamic router port

5. (Optional.) Configuring the MLD snooping querier

   • Enabling the MLD snooping querier

   • Enabling MLD snooping querier election

   • Configuring parameters for MLD general queries and responses

6. (Optional.) Enabling MLD snooping proxying

7. (Optional.) Configuring parameters for MLD messages

   • Configuring source IPv6 addresses for MLD messages

   • Setting the 802.1p priority for MLD messages

8. (Optional.) Configuring MLD snooping policies

   • Configuring an IPv6 multicast group policy

   • Enabling IPv6 multicast source port filtering

   • Enabling dropping unknown IPv6 multicast data

   • Enabling MLD report suppression

   • Setting the maximum number of IPv6 multicast groups on a port

   • Enabling IPv6 multicast group replacement

   • Enabling host tracking

9. (Optional.) Setting the DSCP value for outgoing MLD snooping protocol packets