Configuring static IPv6 multicast MAC address entries

In Layer 2 IPv6 multicast, IPv6 multicast MAC address entries can be dynamically created through Layer 2 multicast protocols (such as MLD snooping). You can also manually configure static IPv6 multicast MAC address entries by binding IPv6 multicast MAC addresses and ports to control the destination ports of the IPv6 multicast data.

You must specify an unused multicast MAC address when configuring a static IPv6 multicast MAC address entry. A multicast MAC address is the MAC address in which the least significant bit of the most significant octet is 1.

1. Enter system view.

   system-view

2. Configure a static IPv6 multicast MAC address entry.

   mac-address multicast mac-address interface interface-list vlan vlan-id

1. Enter system view.

   system-view

2. Enter Layer 2 interface view.

   • Enter Layer 2 Ethernet interface view.

     interface interface-type interface-number

   • Enter Layer 2 aggregate interface view.

     interface bridge-aggregation interface-number

3. Configure a static IPv6 multicast MAC address entry.

   mac-address multicast mac-address vlan vlan-id