Configuring ISDN BRI
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter ISDN BRI interface view. | interface bri interface-number | N/A |
3. Configure the BRI interface to operate in the point-to-point mode. | isdn link-mode p2p | Optional. By default, a BRI interface operates in point-to-multipoint mode, in which a BRI interface operating on the network side can have multiple end devices attached to it. |
4. Set the ISDN protocol type. | isdn protocol-type protocol | Optional. The ISDN protocol on the BRI interface is DSS1 protocol by default. |
5. Configure the ISDN protocol mode. | isdn protocol-mode mode | Optional. By default, the ISDN protocol mode of an ISDN BRI interface is user. Only the BSV cards can work at the network side. |
6. Set the intended bandwidth for the ISDN BRI interface. | bandwidth bandwidth-value | Optional. |
7. Configure the negotiation parameters of ISDN Layer 3 protocol. | See "Configuring the negotiation parameters of ISDN layer 3 protocol." | Optional. |
8. Configure the ISDN Q.931 protocol version. | Optional. | |
9. Configure the SPID parameters about ISDN NI protocol. | Optional. | |
10. Configure the called number and subaddress to be checked during an incoming call. | See "Setting the called number or subaddress to be checked during a digital incoming call." | Optional. |
11. Configure the interface to send calling number during an outgoing call. | See "Configuring an interface to send calling number during an outgoing call." | Optional. |
12. Set the local management ISDN B channel. | Optional. | |
13. Configure ISDN B channel selection mode. | Optional. | |
14. Configure ISDN BRI sliding window size. | See "Configuring the sliding window size on a BRI interface." | Optional. |
15. Configure statistics about ISDN message receiving and sending. | Optional. | |
16. Configure the allowed incoming calling number. | See "Configuring an interface to check the calling number when an incoming call comes." | Optional. |
17. Configure Progress-to-Alerting conversion. | Optional. | |
18. Configure ISDN to carry the Calling-Name field in outgoing packets. | See "Configuring ISDN to carry the Calling-Name field in outgoing packets." | Optional. |
19. Configure ISDN to carry the Connected-Name field in outgoing packets. | See "Configuring ISDN to carry the Connected-Name field in outgoing packets." | Optional. |
20. Configure ISDN to carry the Channel-ID field for only once in the response. | See "Configuring ISDN to carry the Channel-ID field for only once in the responses." | Optional. |
21. Configure the service type in the ISDN bearer compatibility signaling. | See "Configuring the service type in the ISDN bearer compatibility signaling." | Optional. |
22. Configure the progress indicator value in the ISDN signaling. | See "Setting the progress indicator value in ISDN signaling messages." | Optional. |
23. Configure TEI treatment on the BRI interface. | See "." | Optional. |
24. Configure ISDN BRI leased line. | Optional. | |
25. Configure permanent link function on ISDN BRI link layer. | See "Configuring permanent link function at ISDN BRI link layer." | Optional. |
26. Specify an ISDN BRI interface to be in permanent active state on physical layer | See "Configuring an ISDN BRI interface to be in permanent active state on physical layer." | Optional. |
27. Configure deactivation protection for the ISDN BRI interface. | See "Configuring deactivation protection for an ISDN BRI interface." | Optional. |
28. Enable remote powering on an ISDN BRI interface | Optional. |