Enabling remote powering on an ISDN BRI interface
You can configure only network-side BRI interfaces to supply line power to the terminal equipment.
This function is available only on the BSV card's network-side BRI interfaces.
To enable remote powering on an ISDN BRI interface:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter BRI interface view. | interface bri interface-number | N/A |
3. Enable remote powering on the interface. | power-source | The remote powering function is disabled on an ISDN BRI interface by default. |