Configuring the service type in the ISDN bearer compatibility signaling
This feature is available only on voice interfaces such as BSV, VE1, and VT1 interfaces.
The bearer compatibility field in the ISDN signaling specifies the service type of the ISDN bearer. The following service types are supported:
Speech—Specifies the speech service.
audio—Specifies the 3.1 kHz audio.
data—Specifies the unrestricted digital information.
The default service type is speech. You can change the service type to audio or data as needed.
To configure the service type in the ISDN bearer compatibility signaling:
Step | Command | Description |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | N/A |
3. Configure the service type in the ISDN bearer compatibility signaling. | isdn service [ audio | data | speech ] | Optional. The default service type is speech. |