Setting the progress indicator value in ISDN signaling messages

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter ISDN interface view.	interface interface-type interface-number	N/A
3. Set the progress indicator value in the ISDN signaling messages sent by the interface.	isdn progress-indicator indicator	Optional. By default, the progress indicator value set by the upper-layer voice service applies.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter ISDN interface view.

interface interface-type interface-number

N/A

3. Set the progress indicator value in the ISDN signaling messages sent by the interface.

isdn progress-indicator indicator

Optional.

By default, the progress indicator value set by the upper-layer voice service applies.

prev	up	next
Configuring the service type in the ISDN bearer compatibility signaling	home	Configuring TEI treatment on the BRI interface