Validation rules

Attempt to enable IPv6 RIPng before enabling ipv6 unicast-routing.

IPv6 unicast routing must be enabled first.

Attempt to enable IPv6 RIPng before enabling IPv6 on any interface.

IPv6 must be enabled on at least one interface.

Attempt to configure RIPng on vlan without having assigned an IPv6 address for the vlan or the IPv6 status on the vlan is disabled.

IPv6 should be enabled before configuring RIPng.

Attempt to disable IPv6 on a vlan when RIPng is configured on that vlan.

To disable IPv6, RIPng configuration must be removed from this interface.

Attempt to disable ipv6 unicast routing when RIPng is configured on the switch.

RIPng must be disabled first.

Attempt to configure route map when redistribution is already configured.

Redistribution of routes without route-map must be disabled first.

Attempt to configure redistribution when route map is already configured.

Redistribution of routes with route-map must be disabled first.

Attempt to include blackhole or reject static routes when redistribution of static routes is already configured.

Redistribution of static routes must be disabled first.

Attempt to configure redistribution of static routes only when redistribution of blackhole or reject static routes is already configured.

Redistribution of blackhole/reject routes must be disabled first.

Attempt to configure garbage-collect time greater than timeout.

Garbage-collect timer must be shorter than timeout.

Attempt to configure garbage-collect time less than update-time.

Garbage-collect timer must be longer than update.

Attempt to configure timeout lesser than garbage-collect time.

Timeout must be longer than garbage-collect.

Attempt to configure update time greater than garbage-collect time.

Update timer must be shorter than garbage-collect.

User inputs vlan in show command but RIPng is not configured for that vlan.

RIPng is not configured on this interface.