Additional commands

Following CLI commands are enhanced to accommodate RIPng.

VLAN VLAN–ID IPv6

This is a VLAN context command.

Syntax

vlan VLAN-ID ipv6 ripng

Description

Enables/Disables/Configures RIPng protocol for IPv6 on the interface. The command [no] ipv6 ripng enable disables or disconfigures RIPng on the interface. This command can be followed by a RIPng configuration command.

Show running config

Syntax

show running-config router ripng

Description

Shows the router ripng global configuration.

Show running-config router ripng

router ripng
enable
default-metric 3
distance 95
redistribute connected
redistribute static
redistribute ospf3

Options

show running-config router bgp

Show the running configuration for bgp.

show running-config router ospf

Show the running configuration for ospf.

show running-config router ospf3

Show the running configuration for OSPFv3.

show running-config router rip

Show the running configuration for RIP.

show running-config router ripng

Show the running configuration for RIPng.

show running-config router vrrp

Show the running configuration for VRRP.

Usage

Description

Show the running configuration for layer 3 routing protocols.

Show running-config vlan

Syntax

show running-config vlan VLAN-ID

Description

Shows the IPv6 ripng vlan configuration along with other vlan specific configuration.

show running-config vlan

vlan 15
name "VLAN15"
tagged Trk10
no ip address
ipv6 enable
ipv6 address 3005::10/64
ipv6 ripng enable

prev	up	next
Debug commands	home	Validation rules