-
From the Main Menu, select: 2. Switch Configuration —> 2. Port/Trunk Settings
-
In the Group column, move the cursor to the port you want to assign to the switch mesh.
-
Use the up-arrow or down-arrow key to select the next port you want to include in your mesh domain, then press M again. For example, if you were adding ports A1 and A2 to your mesh domain, the screen would appear similar to Mesh group assignments for several ports:
-
Repeat Step 5 for all ports you want in the mesh domain.
-
When you finish assigning ports to the switch mesh, press Enter, then S (for Save). You will then see the following screen.
-
To activate the mesh assignments from the Main menu, reboot the switch by pressing the following keys:
The switch cannot dynamically reconfigure ports to enable or disable meshing, so it is always necessary to reboot the switch after adding or deleting a port in the switch mesh.