display evb evb-tlv

Use display evb evb-tlv to display S-channel EVB TLV negotiation information.

Syntax

display evb evb-tlv [ interface interface-type { interface-number | interface-number:channel-id } ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface: Specifies an interface. If you do not specify an interface, the command displays EVB TLV negotiation information for all interfaces with EVB enabled.

interface-type { interface-number | interface-number:channel-id }: Specifies a Layer 2 Ethernet interface, Layer 2 aggregate interface, S-channel interface, or an S-channel aggregate interface by its type and number. The interface-number argument specifies a Layer 2 Ethernet interface or Layer 2 aggregate interface. The interface-number:channel-id argument specifies an S-channel interface or S-channel aggregate interface.

Examples

# Display EVB TLV negotiation information for Ten-GigabitEthernet 1/0/1.

<Sysname> display evb evb-tlv interface ten-gigabitethernet 1/0/1

S-Channel1/0/1:1
EVB mode                       : Local-bridge/Remote-station
BGID status                    : Supported
Local RR capability            : Supported
Local RR status                : Disabled
Remote SGID status             : Not supported
Remote RR request status       : Not requested
Remote RR status               : Unknown
Max ECP retry time             : Local-3/Remote-NA/Operative-3
ULPPDU retransmission exponent : Local-16/Remote-NA/Operative-16
Resource wait-delay exponent   : Local-20/Remote-NA/Operative-20
Reinit Keep-alive exponent     : Local-25/Remote-NA/Operative-25

S-Channel1/0/1:100
EVB mode                       : Local-bridge/Remote-station
BGID status                    : Supported
Local RR capability            : Supported
Local RR status                : Disabled
Remote SGID status             : Not supported
Remote RR request status       : Not requested
Remote RR status               : Unknown
Max ECP retry time             : Local-3/Remote-NA/Operative-3
ULPPDU retransmission exponent : Local-16/Remote-NA/Operative-16
Resource wait-delay exponent   : Local-20/Remote-NA/Operative-20
Reinit keep-alive exponent     : Local-25/Remote-NA/Operative-25

Table 2: Command output

Field	Description
EVB mode	EVB mode: bridge—EVB bridge. station—EVB station.
BGID status	Support for Group ID on the EVB bridge: Supported. Not supported.
Local RR capability	Support for the RR mode on the EVB bridge: Supported. Not supported.
Local RR status	RR status on the EVB bridge after EVB TLV negotiation.
Remote SGID status	Support for Group ID on the EVB station: Supported. Not supported.
Remote RR request status	Whether or not the EVB station has requested the RR mode: Requested. Not requested.
Remote RR status	Whether or not the EVB station has enabled the RR mode after EVB TLV negotiation: Enabled. Disabled. Unknown.
Max ECP retry time	Maximum ECP retransmission times in this format: Local negotiation value/Remote negotiation value/Operative value. NA means no value is set on the remote EVB station.
ULPPDU retransmission exponent	ECP retransmission exponent in this format: Local negotiation value/Remote negotiation value/Operative value. NA means no value is set on the remote EVB station.
Resource wait-delay exponent	VDP resource-wait-delay exponent in this format: Local negotiation value/Remote negotiation value/Operative value. NA means no value is set on the remote EVB station.
Reinit keep-alive exponent	VDP keepalive exponent in this format: Local negotiation value/Remote negotiation value/Operative value. NA means no value is set on the remote EVB station.

prev	up	next
display evb cdcp	home	display evb s-channel