display evb cdcp
Use display evb cdcp to display CDCP negotiation information.
Syntax
display evb cdcp [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface (Layer 2 Ethernet interface or Layer 2 aggregate interface) by its type and number. If you do not specify an interface, the command displays CDCP negotiation information for all interfaces with EVB enabled.
Examples
# Display CDCP negotiation information for all interfaces with EVB enabled.
<Sysname> display evb cdcp ---------------------------Bridge-Aggregation1--------------------- S-component capability : Local-supported/Remote-not supported Supported S-Channel numbers per-port : Local-167/Remote-0 SVID range : 2-4094 SCID requested from remote : SCID/SVID pair list allocated : <1, 1> ---------------------------Ten-GigabitEthernet1/0/1--------------------- S-component capability : Local-supported/Remote-supported Supported S-Channel numbers per-port : Local-167/Remote-167 SVID range : 2-4094 SCID requested from remote : 1, 2, 3, 4, 6, 10, 11, 12, 34, 35, 67 SCID/SVID pair list allocated : <1, 1>, <2, 3>, <3, 2>, <4, 5>, <6, 4>, <10, 9>, <11, 6>, <12, 7>, <34, 23>, <35, 35>, <67, 67>
Table 1: Command output
Field | Description |
---|---|
S-component capability | Port-mapping S-VLAN component capability on the EVB bridge and the EVB station. |
Supported S-channel numbers per-port | Number of S-channels supported by the EVB bridge and the EVB station. |
SVID range | SVID range on the EVB bridge. |
SCID requested from remote | SCIDs requested by the EVB station in ascending order. |
SCID/SVID pair list allocated | List of (SCID, SVID) pairs allocated by the EVB bridge. |