display evb s-channel

Use display evb s-channel to display S-channel information.

Syntax

display evb s-channel [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies an interface (Layer 2 Ethernet interface or Layer 2 aggregate interface) by its type and number. If you do not specify an interface, the command displays S-channel information for all interfaces with EVB enabled.

Examples

# Display S-channel information for Ten-GigabitEthernet 1/0/1.

<Sysname> display evb s-channel interface ten-gigabitethernet 1/0/1
RR status: D -- Disabled, E -- Enabled
MAC learning: A -- Allowed, F -- Forbidden

S-Channel             SVID    Uptime               RR      MAC       VSI
interface                     yyyy/mm/dd hh:mm:ss  status  learning  number
SCH1/0/1:1            1       2012/12/17 03:43:13  D       A         0
SCH1/0/1:100          100     2012/12/17 03:43:14  D       A         2

Table 3: Command output

Field	Description
S-Channel interface	S-channel interface name.
Uptime	Time when the S-channel was created.
VSI number	Number of VSI interfaces created on the S-channel.

prev	up	next
display evb evb-tlv	home	display evb summary