cfd ais-track link-status vlan

Use cfd ais-track link-status vlan to specify the VLANs where the EAIS frames can be transmitted.

Use undo cfd ais-track link-status vlan to remove the specified VLANs.

Syntax

cfd ais-track link-status vlan vlan-list

undo cfd ais-track link-status vlan vlan-list

Default

The EAIS frames can be transmitted only within the default VLAN of the port.

Views

Layer 2 Ethernet interface view, Layer 2 aggregate interface view

Predefined user roles

network-admin

Parameters

vlan vlan-list: Specifies the VLANs where the EAIS frames can be transmitted. The vlan-list argument specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN ID or a range of VLAN IDs in the form of vlan-id [ to vlan-id ]. The value range for VLAN IDs is 1 to 4094.

Usage guidelines

The EAIS frames are transmitted within the intersection of the VLANs specified with this command and the existing VLANs on the device.

If the command is executed multiple times, the combination of the VLANs specified in each command takes effect.

Follow these guidelines when you use this command:

Examples

# On port Ten-GigabitEthernet 1/0/1, specify VLANs 100 through 200 as the VLANs where the EAIS frames can be transmitted.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] cfd ais-track link-status vlan 100 to 200

Related commands