cfd cc enable

Use cfd cc enable to enable CCM sending on a specified MEP.

Use undo cfd cc enable to disable CCM sending on a specified MEP.

Syntax

cfd cc service-instance instance-id mep mep-id enable

undo cfd cc service-instance instance-id mep mep-id enable

Default

The CCM sending feature is disabled.

Views

Layer 2/Layer 3 Ethernet interface view

Layer 2 aggregate interface view

Predefined user roles

network-admin

Parameters

service-instance instance-id: Specifies the service instance ID in the range of 1 to 32767.

mep mep-id: Specifies the ID of a MEP in the range of 1 to 8191.

Usage guidelines

Follow these guidelines when you use this command:

• Configurations in Ethernet interface view take effect only on the current interface.

• Configurations in aggregate interface view take effect on the aggregate interface and all its member ports.

• Configurations on a member port take effect only when the member port leaves the aggregation group.

Examples

# On port Ten-GigabitEthernet 1/0/1, enable CCM sending on MEP 3 in service instance 5.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] cfd cc service-instance 5 mep 3 enable

Related commands

cfd cc interval