oam errored-frame-period window

Use oam errored-frame-period window to set the errored frame period event detection window.

Use undo oam errored-frame-period window to restore the default.

Syntax

oam errored-frame-period window window-value

undo oam errored-frame-period window

Default

The port uses the global setting.

Views

Layer 2 Ethernet port view, Layer 3 Ethernet port view

Predefined user roles

network-admin

Parameters

window-value: Specifies the errored frame period event detection window in the range of 1 to 65535. The value of this argument must be a multiple of 10000.

Usage guidelines

The configuration in port view takes effect on the specified port. For a port, the configuration in port view takes precedence.

Examples

# Set the errored frame period event detection window to 20000000.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] oam errored-frame-period window 2000

Related commands

• display oam configuration

• display oam link-event

• oam global errored-frame-period window