oam errored-frame-seconds threshold

Use oam errored-frame-seconds threshold to set the errored frame seconds event triggering threshold on a port.

Use undo oam errored-frame-seconds threshold to restore the default.

Syntax

oam errored-frame-seconds threshold threshold-value

undo oam errored-frame-seconds threshold

Default

The port uses the global setting.

Views

Layer 2 Ethernet port view, Layer 3 Ethernet port view

Predefined user roles

network-admin

Parameters

threshold-value: Specifies the errored frame seconds event triggering threshold in the range of 0 to 900.

Usage guidelines

The value of the errored frame seconds event triggering threshold cannot be greater than the value of the errored frame seconds event detection window (in seconds). Otherwise, errored frame seconds events cannot be generated.

The configuration in port view takes effect on the specified port. For a port, the configuration in port view takes precedence.

Examples

# Set the errored frame seconds event triggering threshold on Ten-GigabitEthernet 1/0/1 to 100.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] oam errored-frame-seconds threshold 100

Related commands

• display oam configuration

• display oam link-event

• oam errored-frame-seconds window

• oam global errored-frame-seconds threshold