oam errored-frame-period threshold
Use oam errored-frame-period threshold to set the errored frame period event triggering threshold on a port.
Use undo oam errored-frame-period threshold to restore the default.
Syntax
oam errored-frame-period threshold threshold-value
undo oam errored-frame-period threshold
Default
The port uses the global setting.
Views
Layer 2 Ethernet port view, Layer 3 Ethernet port view
Predefined user roles
network-admin
Parameters
threshold-value: Specifies the errored frame period event triggering threshold in the range of 0 to 4294967295.
Usage guidelines
The configuration in port view takes effect on the specified port. For a port, the configuration in port view takes precedence.
Examples
# Set the errored frame period event triggering threshold on Ten-GigabitEthernet 1/0/1 to 100.
<Sysname> system-view [Sysname] interface ten-gigabitethernet 1/0/1 [Sysname-Ten-GigabitEthernet1/0/1] oam errored-frame-period threshold 100
Related commands
display oam configuration
display oam link-event
oam global errored-frame-period threshold