VXLAN-DCI configuration task list
To configure a VXLAN-DCI network, perform the following tasks:
Configure routing protocols on the transport network for EDs to reach one another.
Configure routing protocols on EDs and VTEPs for them to reach one another.
Configure VXLANs on EDs and VTEPs, and set up VXLAN tunnels between EDs and VTEPs.
Configure VXLAN-DCI on EDs, and set up VXLAN-DCI tunnels between EDs.
Table 2 lists the VXLAN-DCI configuration tasks available on an ED. For more information about basic VXLAN configuration and VXLAN IP gateway configuration, see "Configuring basic VXLAN features" and "Configuring VXLAN IP gateways."
Table 2: VXLAN-DCI configuration task list
Tasks at a glance | Remarks |
---|---|
(Required.) Setting the VXLAN hardware resource mode to border | For more information, see "Setting the VXLAN hardware resource mode." |
(Required.) Creating a VXLAN on a VSI | N/A |
(Required.) Configuring a VXLAN-DCI tunnel | N/A |
(Required.) Assigning a VXLAN-DCI tunnel to a VXLAN | N/A |
(Required.) Configuring a VSI interface | N/A |
(Required.) Specifying a gateway interface for a VSI | N/A |
(Optional.) Enabling packet statistics for a VSI interface | N/A |
(Optional.) Setting the destination UDP port number of VXLAN packets | N/A |
(Optional.) Configuring VXLAN packet check | N/A |
(Optional.) Enabling packet statistics for a VSI | N/A |
(Optional.) Enabling packet statistics for manually created VXLAN-DCI tunnels | N/A |