apply preference

Use apply preference to set a preference for a routing protocol.

Use undo apply preference to restore the default.

Syntax

apply preference preference

undo apply preference

Default

No preference is set for a routing protocol.

Views

Routing policy node view

Predefined user roles

network-admin

Parameters

preference: Specifies a preference in the range of 1 to 255.

Usage guidelines

If you have set preferences for routing protocols by using the preference command, the apply preference command sets a new preference for the matching routing protocol. Unmatched routing protocols still use the preferences set by using the preference command.

Examples

# Configure node 10 in permit mode for routing policy policy1 to set the preference for OSPF external routes to 90.

<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match route-type external-type1or2
[Sysname-route-policy-policy1-10] apply preference 90