apply preferred-value

Use apply preferred-value to set a preferred value for BGP routes.

Use undo apply preferred-value to restore the default.

Syntax

apply preferred-value preferred-value

undo apply preferred-value

Default

No preferred value is set for BGP routes.

Views

Routing policy node view

Predefined user roles

network-admin

Parameters

preferred-value: Specifies a preferred value in the range of 0 to 65535.

Examples

# Configure node 10 in permit mode for routing policy policy1 to set a preferred value of 66 for BGP routes matching AS path list 1.

<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match as-path 1
[Sysname-route-policy-policy1-10] apply preferred-value 66